• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.610-615
• /
• 2001

Effects of rotor-stator blade count ratio on the unsteady aerodynamic characteristics of a cascade was studied by using a Navier-Stokes code. Present Navier-Stokes code is a parallel code and works on a multi-cpu machine. It is based on the SIMPLE algorithm and uses QUICK scheme for convection terms and second order back difference for all temporal derivatives. Computations were carried out for two cases : case 1 is for 3 stator cascade passages subjected to two upstream wakes while case 2 is for 2 stator cascade passages subjected to three upstream wakes. Numerical solutions show that rotor-stator blade count ratio plays a significant role in the unsteady aerodynamic characteristics of the stator cascade. Case 2 shows smaller unsteady fluctuation than case 1, even if they show the same time averaged value. The smaller fluctuation of case 2 is believed due to strong interaction between unsteady vortices. The unsteady lift variation of case 2 is shown to have many high frequency fluctuations as more unsteady vortices travel around the cascade. The unsteady turbulent kinetic energy due to the upstream wake is also shown to decay faster through the cascade passage than in the free stream.

• 한국항공우주학회지
• /
• 제38권7호
• /
• pp.629-636
• /
• 2010

본 논문에서는 시간전진 자유후류 모델이 고려된 비정상 패널 코드를 이용하여 비정상 로터-동체 상호작용에 대한 수치적 해석기법에 대한 연구를 수행하였다. 이전 개발된 시간전진 자유후류 모델이 고려된 비정상 패널 코드는 후류와 깃(Blade)이 아주 근접한 경우에 불안정성이 발생하였다. 이를 제거하기 위해 장속도 기법을 적용하여 코드를 개선하였다. 개선된 코드를 이용하여 NASA에서 실험된 ROBIN(ROtor Body Interaction) 형상에 대한 해석을 수행하였다. 로터가 있을 때와 없을 때의 동체 표면 압력과 유도 유입류의 비를 실험결과 및 기존 수치해석 결과들과 비교하였다. 개발된 코드는 로터-동체 상호 작용으로 인해 발생하는 유동 특성과 생성되는 복잡한 후류의 형상을 잘 예측하였다.

• 대한조선학회논문집
• /
• 제35권1호
• /
• pp.24-31
• /
• 1998

본 논문에서는 경사축에 의해 추진기의 후면에 형성되는 비대칭 후류를 모델링하였고 이를 사용하여 추진기에 발생하는 비정상력과 모멘트를 계산하였다. 또한 공동발생시 비대칭후류가 공동 형상에 미치는 영향을 계산, 검토하였다. 추진기의 비대칭 후류위치를 계산하기 위해 유입유동을 축방향, 접선방향 그리고 반경방향으로 나누고 축방향 유동만을 이용, 후류면에서 zero pressure jump 조건을 만족하는 대칭후류 위치를 계산한 후, 접선방향 및 반경방향의 유동을 추진기의 매회전 위치에서 계산하여 대칭 후류와의 선형 합을 통해 비대칭 후류위치를 계산하였다. 새로운 비대칭 후류모델을 비정상 공동중의 추진기에 적용하여 대칭후류모델의 결과 및 실험 결과와 비교하였다. 비교결과 비대칭 후류모델로부터 계산된 비정상력 및 모멘트가 대칭 후류모델로부터의 결과들 보다 실험치와 좋은 일치를 보임을 확인하였다.

• Wind and Structures
• /
• 제1권2호
• /
• pp.127-144
• /
• 1998

In this paper, the wake structures behind a square cylinder at the Reynolds number of 22,000 are simulated using the large eddy simulation, and the main features of the wake structure associated with unsteady vortex-shedding are investigated. The Smagorinsky model is used for parametrization of the subgrid scales. The finite element method with isoparametric linear elements is employed in the computations. Unsteady computations are performed using the explicit method with streamline upwind scheme for the advection term. The time integration incorporates a subcycling strategy. No-slip condition is enforced on the wall surface. A comparative study between two-and three-dimensional computations puts a stress on the three-dimensional effects in turbulent flow simulations. Simulated three-dimensional wake structures are compared with numerical and experimental results reported by other researchers. The results include time-averaged, phase-averaged flow fields and numerically visualized vortex-shedding pattern using streaklines. The results show that dynamics of the vortex-shedding phenomenon are numerically well reproduced using the present method of finite element implementation of large eddy simulation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.472-478
• /
• 2004

This paper describes the characteristics of the unsteady pressure on the stator surface induced by rotor viscous wakes. The primary object of this study is to investigate the effects of axial spacing between the rotor and the stator and three-dimensional vane geometries such as stator sweep and stator lean on the unsteady pressure fluctuations on the stator vane. To predict these fluctuations, unsteady three-dimensional Navier-Stokes analyses are performed. Furthermore, a three-dimensional analytical method using unsteady lifting-surface theory is also used to elucidate the mechanism of interaction of passing rotor wakes with downstream stator. Five different fan configurations with three sets of stator geometries, which are three radial stator configurations with different axial spacing, the swept stator and the swept and leaned stator, are used for this study. It is found that, in axial spacing between rotor and stator, the effect of radial phase skew of incoming rotor wake is important for the reduction of the induced unsteady pressure in addition to the rotor wake decay. It is also shown that incorporation of stator sweep and lean is effective to reduce this unsteady pressure.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.677-692
• /
• 2017

A numerical approach based on a potential flow method is developed to simulate the unsteady interaction between propeller and rudder. In this approach, a panel method is used to solve the flow around the rudder and a vortex lattice method is used to solve the flow around the propeller, respectively. An iterative procedure is adopted to solve the interaction between propeller and rudder. The effects of one component on the other are evaluated by using induced velocities due to the other component at every time step. A fully unsteady wake alignment algorithm is implemented into the vortex lattice method to simulate the unsteady propeller flow. The Rosenhead-Moore core model is employed during the wake alignment procedure to avoid the singularities and instability. The Lamb-Oseen vortex model is adopted in the present method to decay the vortex strength around the rudder and to eliminate unrealistically high induced velocity. The present methods are applied to predict the performance of a cavitating horn-type rudder in the presence of a 6-bladed propeller. The predicted cavity patterns compare well with those observed from the experiments.

• 한국항공우주학회지
• /
• 제50권6호
• /
• pp.367-376
• /
• 2022

본 연구에서는 정상 및 비정상 공력 해석이 가능한 3차원 아음속 비정렬 패널 프로그램을 개발하고 검증하였다. 물체의 표면을 삼각형 또는 사각형 패널에 source와 doublet의 potential을 분포하여 모델링하였다. 따라서 복잡한 형상과 다물체도 쉽게 모델링 할 수 있다. Kelvin theory와 비정상 Kutta condition을 이용하여 비정상 유동에서 wake의 doublet 크기를 결정하였다. 2차원 및 3차원에서 정상 및 비정상 유동을 해석하여 그 결과를 해석해와 기존의 수치해와 비교하였다.

• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.71-77
• /
• 2012

Numerical simulations are carried out for flow over a circular cylinder controlled by the momentum forcing which is generated by a pair of plasma actuators symmetrically mounted on the cylinder surface. A popular and empirical plasma model is used for the spatial distribution of momentum forcing. In this study, we consider two different types of actuation, i.e., steady and unsteady (or pulsed) actuation. In the unsteady actuation, the actuation is turned on and off periodically, its frequency being a control parameter. The objective of this study is to investigate the effects of actuator location and actuation frequency on the flow structures and the forces on the cylinder. Results show that the cylinder wake can be effectively controlled by proper actuator location. For example, when the actuators are located at $120^{\circ}$ from the stagnation point, vortex shedding is completely suppressed with the boundary layer almost fully attached to the surface, resulting in drag reduction and lift elimination.

• 한국항공운항학회지
• /
• 제14권2호
• /
• pp.39-44
• /
• 2006

The unsteady vortex lattice method is used to model lead-lag in flapping motions of a rectangular flat plate wing. The results for plunging and pitching motions were compared with the limited experimental results available and other numerical methods. They show that the method is capable of simulating many of the features of complex flapping flight. The lift, thrust and propulsive efficiency of a rectangular flat plate wing have been calculated for various lead-lag motion and reduced frequency with an amplitude of flapping angle(20o). To describe a motion profile of wing tip such as elliptic, line and circle, the phase difference of flapping and lead-lag motion was changed. And the effects of the motion profile on the aerodynamic characteristics of the flapping wing are discussed by examination of their trends.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.986-991
• /
• 2003

A turbulent wake generated by a cylinder in nozzle contraction affects to the jet flow characteristics. In this study, a computational work to investigate the effect of the turbulent wake on two-dimensional subsonic jet was carried out with three different kinds of nozzle. Computations are applied to the two-dimensional unsteady, Navier-Stokes equations. Several kinds of turbulent models and wall functions are employed to validate the computational predictions. It was known that the wake flow enhanced the spread of the jet flow, compared with no wake flow condition. It was also found that the jet core is shortened by the wake flow developed from a control cylinder.