• International Journal of Aeronautical and Space Sciences
• /
• 제15권4호
• /
• pp.345-355
• /
• 2014

This paper focuses on aerodynamic and inertial modeling of the propeller for its applications in flight dynamics analyses of a propeller-driven airplane. Unsteady aerodynamic and inertial loads generated by the propeller are formulated using the blade element method, where the local velocity and acceleration vectors for each blade element are obtained from exact kinematic relations for general maneuvering conditions. Vortex theory is applied to obtain the flow velocities induced by the propeller wake, which are used in the computation of the aerodynamic forces and moments generated by the propeller and other aerodynamic surfaces. The vortex lattice method is adopted to obtain the induced velocity over the wing and empennage components and the related influence coefficients are computed, taking into account the propeller induced velocities by tracing the wake trajectory trailing from each of the propeller blades. Aerodynamic forces and moments of the fuselage and other aerodynamic surfaces are computed by using the wind tunnel database and applying strip theory to incorporate viscous flow effects. The propeller models proposed in this paper are applied to predict isolated propeller performances under steady flight conditions. Trimmed level forward and turn flights are analyzed to investigate the effects of the propeller on the flight characteristics of a propeller-driven light-sports airplane. Flight test results for a series of maneuvering flights using a scaled model are employed to run the flight dynamic analysis program for the proposed propeller models. The simulations are compared with the flight test results to validate the usefulness of the approach. The resultant good correlations between the two data sets shows the propeller models proposed in this paper can predict flight characteristics with good accuracy.

• 한국풍공학회지
• /
• 제22권4호
• /
• pp.163-169
• /
• 2018

본 연구에서는 운전 정지 상태로 회전하지 않는 수평축 해상 풍력터빈 로터에서 발생하는 풍하중을 풍속, 요 각도, 방위각, 피치 각도를 달리하면서 대기경계층 내에서 작동하는 조건으로 평가하였다. 하중 예측 결과의 검증을 위해 단순화 한 블레이드 형상에 대한 블레이드 요소이론과 단순 계산치를 이용하여 얻어낸 공력 하중을 상호 비교하였으며, 코드와 비틀림 각도가 블레이드 스팬 방향에 따라 변하는 NREL 5 MW급 대형풍력터빈 로터에 대해서는 NREL에서 개발한 FAST 해석 결과와 본 연구의 해석 결과를 비교함으로써 해석 결과의 정확도를 검증하였다. 로터의 하중은 허브 중심을 원점으로 하는 고정된 3축 좌표계에 대해서 힘과 모멘트로 표현되는 6분력 하중으로 나타내었다. 따라서 이 결과는 풍력터빈 시스템의 동적 거동 해석과 로터에서 발생되는 전도 모멘트를 견디기 위해 필요한 지지 구조물의 기초하중 자료로 적용할 수 있다.

• Wind and Structures
• /
• 제34권6호
• /
• pp.483-497
• /
• 2022

Three-dimensional (3D) computational fluid dynamics (CFD) analysis of flow around a hipped-roof building representative of UK inland conditions are conducted. Unsteady simulations are performed using three variations of the k-ϵ RANS turbulence model namely, the Standard, Realizable, and RNG models, and their predictive capability is measured against current European building standards. External pressure coefficients and wind loading are found through the BS 6399-2:1997 standard (obsolete) and the current European standards (BS EN 1991-1-4:2005 and A1:20101). The current European standard provides a more conservative wind loading estimate compared to its predecessor and the k-ϵ RNG model falls within 15% of the value predicted by the current standard. Surface shear stream-traces and Q-criterion were used to analyze the flow physics for each model. The RNG model predicts immediate flow separation leading to the creation of vortical structures on the hipped-roof along with a larger separation region. It is observed that the Realizable model predicts the side vortex to be a result of both the horseshoe vortex and the flow deflected off it. These model-specific aerodynamic features present the most disparity between building standards at leeward roof locations. Finally, pedestrian comfort and safety criteria are studied where the k-ϵ Standard model predicts the most ideal pedestrian conditions and the Realizable model yields the most conservative levels.

• Advances in aircraft and spacecraft science
• /
• 제10권5호
• /
• pp.419-437
• /
• 2023

This paper presents the study of the effects of rigid-body motion simultaneously with the presence of the effects of temporal variation due to the existence of morphing speed on the aeroelastic stability of the two-stage telescopic wings, and hence this is the main novelty of this study. To this aim, Euler-Bernoulli beam theory is used to model the bending-torsional dynamics of the wing. The aerodynamic loads on the wing in an incompressible flow regime are determined by using Peters' unsteady aerodynamic model. The governing aeroelastic equations are discretized employing a finite element method based on the beam-rod model. The effects of rigid-body motion on the length-based stability of the wing are determined by checking the eigenvalues of system. The obtained results are compared with those available in the literature, and a good agreement is observed. Furthermore, the effects of different parameters of rigid-body such as the mass, radius of gyration, fuselage center of gravity distance from wing elastic axis on the aeroelastic stability are discussed. It is found that some parameters can cause unpredictable changes in the critical length and frequency. Also, paying attention to the fuselage parameters and how they affect stability is very important and will play a significant role in the design.

• 한국소음진동공학회논문집
• /
• 제18권5호
• /
• pp.496-502
• /
• 2008

In this study, supersonic and hypersonic flutter characteristics have been analyzed for the various typical section shapes of missile fin configurations. Nonlinear flutter analyses are conducted considering the effect of moving shock waves. Computational fluid dynamic method is applied to accurately predict unsteady aerodynamic loads due to structural motions for the solution of aeroelastic governing equations. Commonly used typical section shapes of supersonic and hypersonic launch vehicles are considered in the present numerical study. Detailed flutter responses for four different typical section models are presented and the flutter characteristics are physically investigated.

• 동력기계공학회지
• /
• 제20권1호
• /
• pp.50-56
• /
• 2016

This paper handled an investigation on the turbulent flow characteristics of three-dimensional small-size axial fan(SSAF) according to operating loads. Also, it was carried out by unsteady-state, incompressible and three-dimensional large eddy simulation(LES). The downstream flow type of SSAF is changed from axial flow to radial flow around the beginning of stall region at the aerodynamic performance curve. Axial mean velocity component largely grows around blade tip at the operating point of A to D, but transverse and vertical mean velocity components as well as Reynolds shear stresses highly develop around blade tip at the operating point of E to H. On the other hand, the peak value of turbulent kinetic energy developed around blade tip shows the highest at the operating point of E.

• 한국항공우주학회지
• /
• 제36권2호
• /
• pp.156-162
• /
• 2008

본 연구에서는 자유후류기법을 이용하여 복합재 무힌지 로터 블레이드에 대한 정적 공탄성 해석을 수행하였다. 1차원 보의 거동을 해석하기 위하여 대변형 보 이론이 적용되었다. 또한, 복합재 블레이드의 단면 해석을 위하여 이방성 보 이론이 적용되었다. 공탄성 해석에 필요한 공력 하중들은 와류격자법(VLM)에 기초한 3차원 공기력 모델을 통하여 계산되었다. 이때, 정지비행시의 후류는 순차적 시간 적분 자유후류법을 통하여 묘사되었다. 복합재 무힌지 로터 블레이드의 정적 변형에 대한 해석 결과를 2차원 준정상 공기력과 경험후류기법을 통한 해석 결과들과 비교하여 살펴보았다. 결과적으로, 정지비행시 후류 효과에 의해 정적 변형의 결과가 달라짐을 확인하였다.

• 한국항공우주학회지
• /
• 제35권10호
• /
• pp.868-874
• /
• 2007

정지비행시의 헬리콥터 로터 모형의 블레이드의 피치각 변화가 소음방사에 미치는 영향을 수치해석을 통해 파악하였다. 공력 자료는 비정상 패널법과 경험후류 방법을 이용하여 구하였으며, $0^{\circ}$에서 $9^{\circ}$까지 등간격으로 $1.5^{\circ}$ 씩 피치각을 증가시키면서 블레이드 표면상의 공력 하중 분포를 얻어내었다. 수치해석을 통해 얻어낸 두께 소음은 피치각에 무관한 결과를 보였으나, 하중소음은 피치각이 $1.5^{\circ}$ 씩 증가할 때 마다 대략 3~4dBA정도로 소음의 세기가 증가하는 경향을 보였으며, 이정도의 증가분은 소음이 더 커졌음을 감지할 수 있는 충분한 크기라 할 수 있다. 또한 하중소음의 방향성 결과로부터 블레이드의 윗면 보다는 아랫면에서의 소음의 세기가 더 크게 나옴을 알 수 있었다.

• Advances in aircraft and spacecraft science
• /
• 제1권3호
• /
• pp.291-310
• /
• 2014

An advanced model for the linear flutter analysis is introduced in this paper. Higher-order beam structural models are developed by using the Carrera Unified Formulation, which allows for the straightforward implementation of arbitrarily rich displacement fields without the need of a-priori kinematic assumptions. The strong form of the principle of virtual displacements is used to obtain the equations of motion and the natural boundary conditions for beams in free vibration. An exact dynamic stiffness matrix is then developed by relating the amplitudes of harmonically varying loads to those of the responses. The resulting dynamic stiffness matrix is used with particular reference to the Wittrick-Williams algorithm to carry out free vibration analyses. According to the doublet lattice method, the natural mode shapes are subsequently used as generalized motions for the generation of the unsteady aerodynamic generalized forces. Finally, the g-method is used to conduct flutter analyses of both isotropic and laminated composite lifting surfaces. The obtained results perfectly match those from 1D and 2D finite elements and those from experimental analyses. It can be stated that refined beam models are compulsory to deal with the flutter analysis of wing models whereas classical and lower-order models (up to the second-order) are not able to detect those flutter conditions that are characterized by bending-torsion couplings.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.275-282
• /
• 2007

In this study, a fluid-structure interaction (FSI) analysis system has been developed in order to evaluate the turbine cascade performance with blade structural deformation effect. Relative movement of the rotor with respect to stator is reflected by modeling independent two computational domains. To consider the deformed position of rotor airfoil, dynamic moving grid method is applied. Reynolds-averaged Navier-Stokes equations with one equation Spalart-Allmaras and two-equation SST $k-{\varepsilon}$ turbulence models are solved to predict unsteady fluid dynamic loads. A fully implicit time marching scheme based on the Newmark direct integration method with high artificial damping is used to compute the fluid-structure interaction problem. Cascade performance evaluations for different elastic axis positions are presented and compared each other. It is importantly shown that the predicted aerodynamic performance considering structural deformation effect of blade can show some deviations compared to the data generally computed from rigid blade configurations and the position of elastic axis also tend to give sensitive effect.