• Coupled systems mechanics
• /
• 제1권1호
• /
• pp.39-57
• /
• 2012

This study intends to explore dynamic interaction behaviors between actively controlled maglev vehicle and guideway girders by considering the nonlinear forms of electromagnetic force and current exactly. For this, governing equations for the maglev vehicle with ten degrees of freedom are derived by considering the nonlinear equation of electromagnetic force, surface irregularity, and the deflection of the guideway girder. Next, equations of motion of the guideway girder, based on the mode superposition method, are obtained by applying the UTM-01 control algorithm for electromagnetic suspension to make the maglev vehicle system stable. Finally, the numerical studies under various conditions are carried out to investigate the dynamic characteristics of the maglev system based on consideration of the linear and nonlinear electromagnetic forces. From numerical simulation, it is observed that the dynamic responses between nonlinear and linear analysis make little difference in the stable region. But unstable responses in nonlinear analysis under poor conditions can sometimes be obtained because the nominal air-gap is too small to control the maglev vehicle stably. However, it is demonstrated that this unstable phenomenon can be removed by making the nominal air-gap related to electromagnetic force larger. Consequently it is judged that the nonlinear analysis method considering the nonlinear equations of electromagnetic force and current can provide more realistic solutions than the linear analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.247-249
• /
• 2011

Pre-foaming, one of the manufacturing way of foamed concrete, is influenced by foaming agent. When the foaming agent diluted with water, surface tension and viscosity are varied. Therefore, this study is reviewing the surface tension, viscosity and unit weight of foam by experimental factor such as foaming agent types(AES, AOS, VS FP) and foam agent dilution concentration (1, 3, 5%) and temperature of materials (5, 10, 20℃). As an expeimental result, the surface tension and viscosity slightly increased with increasing concentrations. Meanwhile, when increasing temperature, the viscosity has decreased. FP produce relatively stable foams only in case 3% or more, which produce unstable foams containing large amount of water content by decreasing only insignificant surface tension when diluted at concentration of 1%.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.84-91
• /
• 2003

In metal cutting operation, it is very important that predict cutting force and work surface. Vibration is an unstable cutting phenomenon which is due to the interaction of the dynamics of the chip removal process and the structural dynamics of machine tool. When vibration on, it reduces tool life, results in poor surface roughness and low productivity of the machining process. In this study, the experiments were conducted in machining center without cutting fluid to investigate the phenomenon of vibration. In the experiments, accelerometers were set up at the tail stock and tool holder and signals were picked up. Surface roughness profiles are generated under the ideal condition and the occurrence of vibration based on the surface shaping simulation model.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.184-189
• /
• 2003

In metal cutting operation, it is very important that predict cutting force and work surface. Vibration is an unstable cutting phenomenon which is due to the interaction of the dynamics of the chip removal process and the structural dynamics of machine tool. when Vibration occurs, it reduces tool life, results in poor surface roughness and low productivity of the machining process. In this study, the experiments were conducted in machining center without cutting fluid to investigated phenomenon of the Vibration. In the experiments, accelerometers were set up at the tail stock and tool holder and the signals were picked up. In this paper, surface roughness profiles will be generated under the ideal condition and the occurrence of the vibration based on the surface shaping simulation model.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.709-713
• /
• 1996

Mechanical solderless chip packaging with small gold bumps or metal balls has increased in the electronic devices. The preparation of conductive particles (5~7 $\mu\textrm{m}$ diamiter) by electroless nickel plating have been investigated. Generally, batch type electroless plating is applied to provide conductivity on the nonconductors. Since the surface areas of particles are much larger than the bulk substrate, accordingly the electroless plating bath becomes unstable. Thus, we applied the continuous dropping method for the preparation of conductive particles. The uniform coverage of deposited nickel on the particles was obtained by using ammonium acetate as a complexing agent, and surface coverage is further improved without coagulation of particles by the surface active agent treatment before enter the plating bath.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.174-179
• /
• 2002

In metal cutting, Chatter is an unstable cutting phenomenon which is due to the interaction of the dynamics of the chip removal process and the structural dynamics of machine tool. when vibration and chatter occurs, it reduces tool life, results in poor surface roughness and low productivity of the machining process. In this study, the experiments were conducted in CNC lathe without cutting fluid to investigated phenomenon of the chatter, In the experiments, accelerometers were set up at the tail stock and tool holder and the signals were picked up. In order to observe the effect of chatter on the surface roughness profiles, in this paper, surface roughness profiles will be generated under the ideal condition and the occurrence of the chatter based on the surface simulation model.

• 한국환경과학회지
• /
• 제7권2호
• /
• pp.195-202
• /
• 1998

The low level atmospheric obsewation carried out to Investigate magnitude, formation and dissipation of nocturnal surface Inversion layer, also to survey relation to each meterological parameter In Inversion layer at Pusan power plant for Oct. 13, 1996. As coastal area, the surface Inversion layer height was relatively high(186m), and after sunset unstable layer formated firom surface to around 40m, and the Inversion layer was left still in the upper layer. The surface Inversion layer dissipated at 0920LST perfectly. The layer that strong Inversion layer was formated, showed steep variation of potential temperature and wand speed and relative humidity.

• 대한통합의학회지
• /
• 제7권4호
• /
• pp.291-300
• /
• 2019

Purpose : This study focuses on the influence of bridge exercise combined with whole body vibration on muscle activity and balance. Methods : 30 stroke patients were recruited for subjects. The subjects were divided to bridge exercise combined stable surface (Group I), bridge exercise combined unstable surface (Group II), and bridge exercise combined bridge exercise (Group III), of which 10 subjects were randomly allocated. The subjects were given 30 minutes of neurologic physical therapy which included gait training and muscular strength training, and additionally given 30 minutes of bridge exercise combined stable surface, bridge exercise combined unstable surface, and bridge exercise combined whole body vibration for each group, five times a week, for 8 weeks. Their muscle activity and balance were analyzed before the intervention. After 8 weeks of the intervention, the mentioned parameters were measured once more for between-group analysis. Results : Comparative analysis of the muscle activity and balance between the groups showed statistically significant difference, and post-hoc analysis showed the Group III had greater changes in muscle activity and balance than Group Iand Group II. Conclusion : Such results revealed that bridge exercise combined with whole body vibration is effective in muscle activity and balance. Based on the current study, more effective program is to be proposed for elite athletes as well as stroke patients. Based on the current study, studies that incorporates various frequencies of vibration is required for development of effective whole body vibration exercise program.

• 대한통합의학회지
• /
• 제6권2호
• /
• pp.77-87
• /
• 2018

Purpose : The purpose of this study was to figure out the changes of normal people's balance ability when squat exercise in the condition of visual blocked or non-visual blocked on the stable or the unstable surfaces. Also, this study intended to assess balance ability more objectively and in a more diversified ways by using Biorescue. Methods : This study randomly assigned all the subjects to 4 groups; visual blocked or non-visual blocked on the stable surface or the unstable surface. Subjects were given 3 sets of squat exercises per day, 3 times a week for 3 weeks. At the beginning and the end of the exercise for 3 weeks, subjects measured balance ability using Biorescue and Lower Quarter Y-balance Test to evaluate the improvements of before and after. Results : All the groups showed the differences in the balance ability on the Biorescue and The Lower Quarter Y-balance test before and after the exercise. Among these groups, a group with condition of visual blocked on the stable surface showed the highest improvements. And also, it showed significant differences compared to other groups (P>0.05). Conclusion: Using squat combined with variables according to this study, it can be utilized for rehabilitation of the aged and preparation of healthier life.

• 대한정형도수물리치료학회지
• /
• 제29권1호
• /
• pp.69-79
• /
• 2023

Purpose: This study examined the possibility of muscle strength and balance ability improvement through coordinative locomotor training by making a difference on the supporting plane using a resistance band for adolescent athlete of Taekwondo sparring athletes. Methods: A total of 22 students were selected as to the participants of the study, and 11 students each were randomly assigned to the control and experimental group for coordination locomotor training using a resistance band on stable and unstable supporting surface. The training period was 60 min, three times a week, for 8 weeks in total. To confirm changes on balance ability of each participant, balance assessment devices are used. Moreover, surface electromyography was used for muscle strength evaluation. Results: After coordinated locomotor training using a resistance band for 8 weeks, the difference bet ween groups was not significant; Also, the improvement in strength was no significant difference in other muscles in the between groups, but there was a significant in the muscle activity of the rectus muscle of the right thigh in the experimental group. Conclusion: The participants demonstrated that coordinative locomotor training using the elastic band on an unstable supporting surface was able to obtain junctional effects for the prevention of exercise injuries in youth taekwondo sparring athletes, and muscle activity exercise of the rectus muscle of the right thigh was particularly effective.