• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.490.1-490.1
• /
• 2014

The ZnO nanowire (NW)-based nanogenerators (NGs) can have rectifying current and potential generated by the coupled piezoelectric and semiconducting properties of ZnO by variety of external stimulation such as pushing, bending and stretching. So, ZnO NGs needed to enhance durability for stable properties of NGs. The durability of the metal electrodes used in the typical ZnO nanogenerators(NGs) is unstable for both electrical and mechanical stability. Indium tin oxide (ITO) is used as transparent flexible electrode but because of high cost and limited supply of indium, the fragility and lack of flexibility of ITO layers, alternatives are being sought. It is expected that carbon nanotube and Ag nanowire conductive coatings could be a prospective replacement. In this work, we demonstrated transparent flexible ZnO NGs by using CNT/Ag nanowire hybrid electrode, in which electrical and mechanical stability of top electrode has been improved. We grew vertical type ZnO NW by hydrothermal method and ZnO NW was coated with hybrid silicone coating solution as capping layer to enhance adhesion and durability of ZNW. We coated the CNT/Ag nanowire hybrid electrode by using bar coating system on a capping layer. Power generation of the ZnO NG is measured by using a picoammeter, a oscilloscope and confirmed surface condition with FE-SEM. As a results, the NGs using the CNT/Ag NW hybrid electrode show 75% transparency at wavelength 550 nm and small change of the resistance of the electrode after bending test. It will be discussed the effect of the improved flexibility of top electrode on power generation enhancement of ZnO NGs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.382-385
• /
• 2003

Chemical mechanical polishing(CMP) is an essential process in the production of copper-based chips. On this work, the stability of Hydrogen Peroxide($H_2O_2$) as oxidizer of Cu CMP slurry has been investigated. $H_2O_2$ is known as the most common oxidizer in Cu CMP slurry. Copper slowly dissolves in $H_2O_2$ solutions and the interaction of $H_2O_2$ with copper surface had been studied in the literature. Because hydrogen peroxide is a weak acid in aqueous solutions, a passivation-type slurry chemistry could be achieved only with pH buffered solution.[1] Moreover, $H_2O_2$ is so unstable that its stabilization is needed using as oxidizer. As adding KOH as pH buffering agent, stability of $H_2O_2$ decreased. However, stability went up with putting in small amount of BTA as film forming agent. There was no difference of $H_2O_2$ stability between KOH and TMAH at same pH. On the other hand, $H_2O_2$ dispersion of TMAH is lower than that of KOH. Furthermore, adding $H_2O_2$ in slurry in advance of bead milling lead to better stability than adding after bead milling. Generally, various solutions of phosphoric acids result in a higher stability. Using Alumina C as abrasive was good at stabilizing for $H_2O_2$; moreover, better stability was gotten by adding $H_3PO_4$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.46-49
• /
• 2003

Chemical mechanical polishing (CMP) is an essential dielectric planarization in multilayer microelectronic device fabrication. In the CMP process it is necessary to minimize the extent of surface defect formation while maintaining good planarity and optimal material removal rates. The polishing mechanism of W-CMP process has been reported as the repeated process of passive layer formation by oxidizer and abrasion action by slurry abrasives. Thus, it is important to understand the effect of oxidizer on W passivation layer, in order to obtain higher removal rate (RR) and very low non-uniformity (NU%) during W-CMP process. In this paper, we compared the effects of oxidizer or W-CMP process with three different kind of oxidizers with 5% hydrogen peroxide such as $Fe(NO_3)_3$, $H_2O_2$, and $KIO_3$. The difference in removal rate and roughness of W in stable and unstable slurries are believed to caused by modification in the mechanical behavior of $Al_3O_3$ particles in presence of surfactant stabilizing the slurry.

• 한국작물학회지
• /
• 제34권s02호
• /
• pp.96-114
• /
• 1989

There are several meterorolgical stresses in the winter cereal crops. Among these stresses, cold injury is one of the most important stresses for wheat and barley production in Korea. The reduction in grain yield of the wheat and barley due to cold injury has occurred almost every year in Korea. The objective of the study was to get the basic information in relation to the cold injury and to detect the method minimizing the damage of cold injury. When the air temperature was the ranges of -13$^{\circ}C$ to -15$^{\circ}C$, the soil temperature at the crown part of the plant was very stable, whereas in the ranges of -2$^{\circ}C$ to -3$^{\circ}C$ the soil surface temperature was more unstable and cold than air and subterranean temperatures. The different parts of the plant in wheat and barley possess the different levels of cold hardiness. In comparison to the cold hardiness of plant parts, the leaf and crown are the less sensitive to cold injury than root and vascular transitional zone. The type and extent of stress is determined by the redistribution pattern of water during freezing. These types from freezing processes were three types: a) Equilibrium freezing pattern b) Non -equilibrium freezing pattern, c) Non-equilibrium freezing pattern typical of tender tissues. Cold hardiness in wheat plants were more harder than barley plants at vegitative stage, but inverted at the reproductive stage. Injuries by low temperature during the seasons of barley cultivation in Korea were occured mainly in four stage; in the first and third stage, frost injury occurs, the second stage, freezing injury, and the fourth stage, chilling injury.

• 한국축산식품학회지
• /
• 제38권3호
• /
• pp.476-486
• /
• 2018

In this study, the droplet size distribution, rheological properties, and stability of dairy cream-based emulsions homogenized with different sucrose fatty acid ester (SFAE, a non-ionic small-molecule emulsifier) concentrations (0.08%, 0.16%, and 0.24% w/w) at different homogenization pressures (10 MPa and 20 MPa) were examined. Homogenization at a high pressure resulted in a smaller droplet size and narrower droplet size distribution. The D[4,3] (volume-weighted mean) and D[3,2] (surface-weighted mean) values of the emulsions decreased with an increase in the SFAE concentration. The flow properties of the emulsions homogenized with SFAE showed shear-thinning (n=0.21-0.46) behavior. The apparent viscosity (${\eta}_{a,10}$) and consistency index (K) of the homogenized emulsions were lower than those of the control sample that is non-homogenized and without SFAE, and decreased with an increase in SFAE concentration. The storage modulus (G') and loss modulus (G") of all emulsions homogenized with SFAE were also lower than those of the control sample. The stability of all emulsions with SFAE did not show any significant change for 30 d at $5^{\circ}C$. However, the emulsions stored at $40^{\circ}C$ were unstable over the storage period. Therefore, the addition of SFAE enhanced the stability of dairy cream emulsions during storage at refrigeration temperature ($5^{\circ}C$).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.252-253
• /
• 2011

ZnO-based thin film transistors (TFTs) are of great interest for application in next generation flat panel displays. Most research has been based on amorphous indium-gallium-zinc-oxide (IGZO) TFTs, rather than single binary oxides, such as ZnO, due to the reproducibility, uniformity, and surface smoothness of the IGZO active channel layer. However, recently, intrinsic ZnO-TFTs have been investigated, and TFT- arrayss have been demonstrated as prototypes of flat-panel displays and electronic circuits. However, ZnO thin films have some significant problems for application as an active channel layer of TFTs; it was easy to change the electrical properties of the i-ZnO thin films under external conditions. The variable electrical properties lead to unstable TFTs device characteristics under bias stress and/or temperature. In order to obtain higher performance and more stable ZnO-based TFTs, HZO thin film was used as an active channel layer. It was expected that HZO-TFTs would have more stable electrical characteristics under gate bias stress conditions because the binding energy of Hf-O is greater than that of Zn-O. For deposition of HZO thin films, Hf would be substituted with Zn, and then Hf could be suppressed to generate oxygen vacancies. In this study, the fabrication of the oxide-based TFTs with HZO active channel layer was reported with excellent stability. Application of HZO thin films as an active channel layer improved the TFT device performance and bias stability, as compared to i-ZnO TFTs. The excellent negative bias temperature stress (NBTS) stability of the device was analyzed using the HZO and i-ZnO TFTs transfer curves acquired at a high temperature (473 K).

• 한국의류학회지
• /
• 제16권3호
• /
• pp.209-221
• /
• 1992

A standpoint art's style, present-day Western dress was establishing a systematic, theoritical value in sphere of fine art's meaning & it's expression on the modern fashion. For this reason, I selected Impressionism (a broad senes: be included Impressionism, Neo-Impressionism, Post-Impressionism) that was designated 'the revolution of color'. In the previous paper, 1 already discussed about the modern fashion under the influence of the color of Impressionism, from this study, Neo-Impressionism's techniques & it's influence on the modern fashion was investigated. The Impressionists had purposely used uneven brushwork & a vivid palette to transmit the intensity & immediacy of nature, whereas the Neo-Impressionists utilized methodically applied dots, a technique commonly described as Pointillism, to achieve their rationalist goal of eliminating the fugitive & the casual in order to seize a more fundamental reality. Of all them, Seurat had already become interested in the posible analogies between science, music & psychology on the on hand & art on the other, and scientist's books & articles offered a wealth of theoretical support. 1'articulary, it was corroborated that effects of sadness, calm, or happiness could be achieved through manipulation of color & design. The conclusions are as follow: 1. Through the modern fashion, a space between pattern & pattern was reflected unstable balances & harmonies, that, Neo-Impressionist emphasized the distinction between outdoor & subject, between elaborately clothed & nude figures, corresponded to modern fashion's pattern. 2. The modern fashion was presented a small border or band within the pattern itself which colors complemented those of the adjacent pictorial surface and mediated between the painted image & its enclosure.

• 지질공학
• /
• 제17권4호
• /
• pp.545-554
• /
• 2007

자연사면 산사태는 주요 유발인자인 강우나 지진 이외에 토질특성, 지형 및 지질요소 등 다양한 인자의 영향으로 발생될 수 있다. 본 연구지역의 경우 파괴의 시점에 인공구조물이 시공되어 있어 이들과 사면붕괴와의 관련성을 밝히는 것은 매우 의미가 있다. 이를 위해 원지반의 물성을 추정하여 자연사면 자체의 붕괴에 대한 취약성을 파악하고 구조물에 의해 변화된 지반에 대한 불안정성을 비교하여 붕괴원인을 살펴보았다. 현장조사와 실내시험으로 원지반과 성토지반의 물성을 구하였고, 지구물리탐사를 통해 추정된 파괴면의 심도를 이용하여 지하수위 변화에 따른 2차원과 3차원 한계평형해석을 각각 수행하였다. 해석결과는 지반의 토질특성과 강도정수에 상관없이 비슷한 안전율을 보였고, 지하수위는 만수위시 불안정해지는 것으로 나타났다.

• 지질공학
• /
• 제17권3호
• /
• pp.381-391
• /
• 2007

본 연구에서는 2차원 유한요소법과 3차원 한계평형법을 함께 이용하여 테일러스 분포사면의 안정성을 해석하였다. Phase2를 이용한 유한요소해석에서는 발생응력의 분포를 이용하여 파괴심도를 추정하였다. 파괴면은 테일러스층 하부에 약 3-10m의 두께로 분포하는 붕적층 내에서 발생하였다. 유한요소해석 결과와 지질조사결과를 바탕으로 3차원 모델을 작성하여 한계평형해석을 실시하였다. 3차원 한계평형해석결과를 보면 건조시에는 모든 사면에서 안정한 것으로 나타났으나, 집중호우에 의해 지하수면이 붕적층을 포화시킬 때에는 급격히 불안정해지는 것으로 나타났다.

• 대한통합의학회지
• /
• 제4권2호
• /
• pp.29-36
• /
• 2016

Purpose : The purpose of this study was to find out the effects on muscle activations of serratus anterior and upper trapezius muscles when push-up plus exercise togu applied differently depending on the body part. Method : Thirty six volunteers took part in this study and we divided into three groups(upper arm togu group 12, leg togu group 12, upper arm-leg togu group 12). Each experimental group performed push-up plus exercise. All volunteers received a total of 18 exercise session over a 6 week period (three times per week). Exercise program was composed of serratus anterior and upper trapezius push-up plus exercise. Then we measured muscle activation of scapular stabilizer by electromyography. Repeated ANOVA was used to examine the effects of the intervention on each outcome measure. Result : After the six week intervention, there was a significant difference between the pre and 6 week in serratus anterior and upper trapezius muscle activity(p<0.05). After the six week intervention, there was a significant difference among the three group in serratus anterior muscle activity but no significant difference in upper trapezius muscle activity(p>.05). Conclusion : Serratus anterior and upper trapezius showed high muscle activity during push-up plus exercise. Therefore have a positive impact of scapular stabilizer. The larger the area of the unstable support surface, the larger muscle activity was larger of variation quantity.