• 한국산학기술학회논문지
• /
• 제20권9호
• /
• pp.233-239
• /
• 2019

무인 잠수정은 접경지역이나 적 잠수함이나 잠수정이 출몰하는 위협지역에서 감시 정찰 임무 가능한 주요 무기체계로 국내 외에서 활발한 연구 개발이 진행되고 있다. 무인 잠수정의 주요 활용처는 민수 분야에서는 해저 자원 탐사, 재난 예측, 해저 지형 조사 등에 활용가능하고, 국방 분야에서는 위협 지역이 등에서 적 잠수함/정 등에 대한 대잠 정찰, 기뢰 제거 등에 활용 가능하다. 본 논문에서는 무인 잠수정의 무게별, 임무별 주요 분류에 대해서 살펴보고, 무게별 주요 분류 기준에 따라 휴대용급, 경량급, 중량급, 대형급 무인 잠수정의 국외 개발 동향을 조사 분석한다. 이를 기반으로 국내 무인 잠수정 개발 동향을 조사 분석하여 국외 대비 국내 현황을 살펴본다. 또한 앞서 조사 분석된 국내 외 주요 무인잠수정 개발 현황을 통하여, 본 논문에서는 미래 국내 무인 잠수정의 핵심 기술로 은밀성 강화와 통합 전장 운영이 가능한 자율제어 기술, 수중 장기 체류가 가능한 차세대 에너지원 기술, 소형화 및 경량화 기반의 정밀 센서 기술 등 미래 무인 잠수정에 대한 발전 방안을 제시한다.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.475-480
• /
• 2020

Underwater operating platforms face difficulties regarding power supply and communications. To overcome these difficulties, this study proposes a hybrid surface and underwater vehicle (HSUV) and presents the development of the platform, control algorithms, and results of field tests. The HSUV is capable of supplying reliable power to the unmanned underwater vehicle (UUV) and obtaining data in real time by using a tether cable between the UUV and the unmanned surface vehicle (USV). The HSUV uses global positioning system (GPS) and ultra-short base line sensors to determine the relative location of the UUV. Way point (WP) and dynamic positioning (DP) algorithms were developed to enable the HSUV to perform unmanned exploration. After reaching the target point using the WP algorithm, the DP algorithm enables USV to maintain position while withstanding environmental disturbances. To ensure the navigation performance at sea, performance tests of GPS, attitude/heading reference system, and side scan sonar were conducted. Based on these results, manual operation, WP, and DP tests were conducted at sea. WP and DP test results and side scan sonar images during the sea trials are presented.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.123-130
• /
• 2004

Ocean developments gradually move to deep-sea in the 21 century. A deep-sea unmanned underwater vehicle is one of important tools for ocean resource survey. A marine cable plays an important role for the safe operation of a deep-sea unmanned underwater vehicle. The first cable of a deep-sea unmanned underwater vehicle is excited by surface vessel motion and shows non-linear dynamic behaviors. A numerical method is necessary for analysing the dynamic behaviour of the first marine cable. In this study, a numerical program is estabilished based on a finite difference method. The program is appled to a 6000m long cable for a deep-sea unmanned underwater vehicle and shows good reasonable results.

• 한국해양공학회지
• /
• 제19권3호
• /
• pp.31-38
• /
• 2005

Ocean developments gradually move to deep-sea in the 21 century. A deep-sea unmanned underwater vehicle is one of important tools for ocean resource survey. A marine cable plays an important role for the safe operation and signal transmission of a deep-sea unmanned underwater vehicle. The umbilical cable of a deep-sea unmanned underwater vehicle is excited by surface vessel motion and shows non-linear dynamic behaviors. A numerical method is necessary for analysing the dynamic behavior of a marine cable. In this study, a numerical program is established based on a finite difference method. The program is appled to 6000m long cable for a deep-sea unmanned underwater vehicle and shows good reasonable results.

• 한국해양공학회지
• /
• 제26권5호
• /
• pp.81-86
• /
• 2012

Unmanned underwater vehicles have many applications in scientific, military, and commercial areas because of their autonomy. In many cases, an underwater vehicle adopts a control algorithm based on a tactical inertial sensor for precise control. However, a control algorithm that uses a tactical inertial sensor is unsuitable for some underwater vehicle missions such as torpedo decoys. This paper proposes a control algorithm for an unmanned underwater vehicle that does not require precise control. The control algorithm proposed for an unmanned underwater vehicle adopts a low cost MEMS inertial sensor, and simulations using the specifications of the MEMS inertial sensor under development are performed to verify the control algorithm under a real environment. The results of these simulations are presented.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.243-250
• /
• 2002

According to Ocean Korea 21, a basic plan established by the Ministry of Maritime Affairs and Fisheries (MOMAF) of Korea in May 2000, Korea Research Institute of Ships and Ocean Engineering (KRISO) proposed a program for the development of a deep-sea unmanned underwater vehicle (UUV) to explore deep sea for scientific purpose. KRISO has launched a project in May 2001 under the support of MOMAF. The deep-sea unmanned underwater vehicle will be applied to scientific researches in deep-sea as well as in shallow water. For operation of underwater vehicles in shallow water near the Korean Peninsula, a special design is required because of strong tidal current. In addition, MOMAF requires the vehicle to be designed for the purpose of long range survey, a long-term observation, and precise works in a specific area. Thus, KRISO has planned to design the system with the functional combination of both ROV and AUV. This paper presents the design of the deep-sea unmanned underwater vehicle.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.198-203
• /
• 2004

Ocean developments gradually move to deep-sea in the 21 century. A deep-sea unmanned underwater vehicle is one of important tools for ocean resource survey. A marine cable plays an important role for the safe operation and signal transmission of a deep-sea unmanned underwater vehicle. The first cable of a deep-sea unmanned underwater vehicle is excited by surface vessel motion and shows non-linear dynamic behaviors. A ROV launcher is also excited by the 1st cable motion. A numerical method is necessary for analysing the dynamic behaviour of the first marine cable and the ROV launcher. In this study, a numerival program is appled to a 6,000m long cable for a deep-sea unmanned underwater vehicle to shaw shows the dynamic behaviour of the cable and the ROV launcher under combined excitations.

• 대한임베디드공학회논문지
• /
• 제6권3호
• /
• pp.149-156
• /
• 2011

Transmission delay and packet loss induced by a communication network can degrade the control performance and, even make the system unstable. This paper presents a method for compensating transmission delay and packet loss in a networked control system for unmanned underwater vehicle. The proposed method is based on Lagrange interpolation in order to satisfy the requirements of simplicity and model-independency. In this work, the lost/delayed data are estimated in real time by only using the past data without requiring any mathematical model of the controlled system. Consequently, the proposed method can be implemented independent of the controlled system, and also it can achieve fast and accurate compensation performance. The performance of the proposed technique is evaluated by numerical simulations with an unmanned underwater vehicle.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.579-589
• /
• 2011

One of the most significant UUV(Unmanned Underwater Vehicle) applications is MCM(Mine Countermeasure), which makes good use of UUV characteristics to provide covert, rapid, controlled and efficient survey of a potential minefield without risking a human operator. In this paper, a survey of the today's MCM missions where UUVs will play a role, the vehicle systems that are either under development or planned in the future are presented. And examines principal technical challenges and outline new enabling technologies. Particularly, this paper analyses current approaches to tacking these technologies and technological limitation of UUVs as a MCM platform, and research efforts to develop the technology necessary to meet the domestic MCM mission needs.

• 대한임베디드공학회논문지
• /
• 제14권1호
• /
• pp.25-31
• /
• 2019

An underwater glider is a type of autonomous unmanned vehicle and it advances using a vertical zig-zag glide. For this purpose, the position of an internal battery is regulated to control its attitude, and the amount of water in a buoyancy bag is regulated to control the depth. Underwater glider is suitable for a long-distance mission for a long time, because the required energy is much smaller than the conventional autonomous unmanned vehicle using propeller propulsion system. In this paper, control of horizontal tail wing is newly added to the conventional battery position and buoyancy control. The performance of the proposed controller is shown through Matlab simulation.