• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.128-132
• /
• 2009

Polycrystalline samples of $(Ru_{0.8}Nb_{0.2})Sr_2(Gd_{1.5-x}Nd_xCe_{0.5})Cu_2O_z$($ 0{\leq}x{\leq}1.25$) have been synthesized by a solid-state reaction route. The X-ray diffraction data revealed that the Nd solubility limit can be placed between x=0.5 and x=0.75. The superconducting transition temperature decreased with increasing Nd content, confirming that Nd entered the lattice. Room-temperature thermoelectric power measurements showed that all the samples are in the underdoped state and the partial substitution of Nd for Gd resulted in a decrease in the carrier density on the superconducting layers.

• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.740-746
• /
• 2007

The potential candidates for IT-SOFCs cathode materials, $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ (BSCF) and $La_{0.6}Ba_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LBCF) powders, were synthesized by a EDTA-citrate combined method from $Sr(NO_3)_2$, $Ba(NO_3)_2$, $La(NO_3)_3{\cdot}6H_2O$, $Co(NO_3)_2{\cdot}6H_2O$, $Fe(NO_3)_3{\cdot}9H_2O$, citric acid and $EDTA-NH_3$. The cathode performance of symmetrical electrochemical cells consisting of BSCF-GDC or LBCF-GDC composite electrodes and a GDC electrolyte was investigated using by AC impedance spectroscopy at the temperature range of 500 to $700^{\circ}C$. It was found that a single phase perovskite could be successfully synthesized when the precursor is heated at $850^{\circ}C$ for 2 h. Due to thermal expansion mismatch between BSCF and GDC, the composite cathodes with lower GDC content than 45 wt% were peeled off from the GDC electrolyte and their electrode polarization resistance was estimated to be high. The thermal expansion coefficient of BSCF-GDC composites was decreased with increasing the GDC content and the electrode peeling off did not occur in BSCF-45 and 55 wt% GDC composites. BSCF-45 wt% GDC composite electrode showed the lowest area specific resistances (ASR) of 0.15 and $0.04{\Omega}{\cdot}cm^2$ at 600 and $700^{\circ}C$, respectively. On the other hand, LBCF-GDC composite cathodes showed higher ASR than the BSCF-45 and 55 wt% GDC and their cathode performance were decreased with the GDC content.

• Korean Journal of Psychosomatic Medicine
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2018

Objectives : This study aimed to investigate the psychosocial characteristics of functional gastrointestinal disorder (FGID) in patients with psychiatric disorders. Methods : This study was conducted with 144 outpatients visiting the psychiatric clinic at a university hospital. FGIDs were screened according to the Rome III questionnaire-Korean version. Demographic factors were investigated, and psychosocial factors were evaluated using the Hospital Anxiety Depression Scale, Patient Health Questionnaire-15, Childhood Trauma Questionnaire-Korean, and State-Trait Anger Expression Inventory. Chisquared test and student's t-test were used as statistical analysis methods. Results : There were differences in education level between two groups divided according to FGID status (${\chi}^2=10.139$, p=0.017). Comparing the psychiatric disorder by FGID group, irritable bowel syndrome (IBS) group showed significant differences (${\chi}^2=11.408$, p=0.022). According to FGID status, IBS group showed significant differences for anxiety (t=-3.106, p=0.002), depressive symptom (t=-2.105, p=0.037), somatic symptom (t=-3.565, p<0.001), trait anger (t=-3.683, p<0.001), anger-in (t=-2.463, p=0.015), and anger-out (t=-2.355, p=0.020). Functional dyspepsia group showed significant differences for anxiety (t=-4.893, p<0.001), depressive symptom (t=-3.459, p<0.001), somatic symptom (t=-7.906, p<0.001), trait-anger (t=-4.148, p<0.001), state-anger (t=-2.181, p=0.031), anger-in (t=-2.684, p=0.008), and anger-out (t=-3.005, p=0.003). Nonerosive reflux disease group showed significant differences for anxiety (t=-4.286, p<0.001), depressive symptom (t=-3.402, p<0.001), somatic symptom (t=-7.162, p<0.001), trait anger (t=-2.994, p=0.003), state anger (t=-2.259, p=0.025), anger-in (t=-2.772, p=0.006), and anger-out (t=-2.958, p=0.004). Conclusions : Patients with psychiatric disorders had a high prevalence of FGID, and various psychosocial factors contributed to such differences. Therefore, the psychiatric approach can offer better understandings and treatments to patients with FGID.

• Journal of Korean Library and Information Science Society
• /
• v.23
• /
• pp.363-404
• /
• 1995

This study is to set up a model of minimum and optimum standards for college and university library building areas in Korea. The results of this study are summarized as follows: 1. minimum standards(proposal) At first, Areas needed by factors of space component are as follows: User space --- 0.45 $m^{2}$ per student. Collection space --- 0.0107 $m^{2}$ per volume Staff space --- 10.1 $m^{2}$ per person Space attached to user, collection and staff space --- 5% of the sum of user, collection and staff areas(0.041 $m^{2}$ per student). Nonassignable space --- 25% of the sum of user, collection and staff areas (0.21 $m^{2}$ per student). Next, the formula to calculate the total area of the college and university library building is as follows: N = 0.45T $m^{2}$(a) + 0.0107V $m^{2}$(b) + 10.1S $m^{2}$(c) + 0.05(a+b+c) $m^{2}$, NS = 0.25N $m^{2}$. 2. Optimum standards(proposal) At first, Areas needed by factors of space component are as follows: User spae --- 0.64 $m^{2}$) per student. Collection space --- 0.01 $m^{2}$ per volume Staff space --- 9.7 $m^{2}$ per person Space attached to user, collection and staff space --- 5% of the sum of user, collection and staff areas(0.073 $m^{2}$ per student). Nonassignable space --- 25% of the sum of user, collection and staff areas(0.38 $m^{2}$ per student). Next, the formula to calculate the total area of the college and university library building is as follows: N = 0.64T $m^{2}$(a) + 0.01V $m^{2}$(b) + 9.7S $m^{2}$(c) + 0.05(a+b+c) $m^{2}$, NS = 0.25N $m^{2}$.

• Animal Bioscience
• /
• v.35 no.7
• /
• pp.1010-1020
• /
• 2022

Objective: The experiment was conducted to evaluate the effects of maternal undernutrition during late pregnancy on the expressions of genes involved in growth and development in ovine fetal perirenal brown adipose tissue (BAT). Methods: Eighteen ewes with singleton fetuses were allocated to three groups at day 90 of pregnancy: restricted group 1 (RG1, 0.33 MJ metabolisable energy [ME]/kg body weight [BW]^0.75/d, n = 6), restricted group 2 (RG2, 0.18 MJ ME/kg BW^0.75/d, n = 6), and a control group (CG, ad libitum, 0.67 MJ ME/kg BW^0.75/d, n = 6). The fetuses were removed at day 140 of pregnancy. All data were analyzed by using the analysis of variance procedure. Results: The perirenal fat weight (p = 0.0077) and perirenal fat growth rate (p = 0.0074) were reduced in RG2 compared to CG. In fetal perirenal BAT, the protein level of uncoupling protein 1 (UCP1) (p = 0.0001) was lower in RG1 and RG2 compared with CG and UCP1 mRNA expression (p = 0.0265) was decreased in RG2. The protein level of myogenic factor 5 (Myf5) was also decreased in RG2 (p = 0.0001). In addition, mRNA expressions of CyclinA (p = 0.0109), CyclinB (p = 0.0019), CyclinD (p = 0.0015), cyclin-dependent kinase 1 (CDK1) (p = 0.0001), E2F transcription factor 1 (E2F1) (p = 0.0323), E2F4 (p = 0.0101), and E2F5 (p = 0.0018) were lower in RG1 and RG2. There were decreased protein expression of peroxisome proliferator-activated receptor-γ (PPARγ) (p = 0.0043) and mRNA expression of CCAAT/enhancer-binding protein-α (C/EBPα) (p = 0.0307) in RG2 and decreased PPARγ mRNA expression (p = 0.0008) and C/EBPα protein expression (p = 0.0015) in both RG2 and RG1. Furthermore, mRNA expression of bone morphogenetic protein 4 (BMP4) (p = 0.0083) and BMP7 (p = 0.0330) decreased in RG2 and peroxisome proliferator-activated receptor co-activator-1α (PGC-1α) reduced in RG2 and RG1. Conclusion: Our observations support that repression of regulatory factors promoting differentiation and development results in the inhibition of BAT maturation in fetal perirenal fat during late pregnancy with maternal undernutrition.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.183-191
• /
• 2005

This study is designed to compare the performance of established samplers (personal air sampler and MiniVOL portable air sampler) commonly used in the air environment or work environment with that of the sampler made by remodeling the air bubble generator for aquarium fishes. Sampling method used in this study is the filter collection method for PM10 and total suspended particles (TSP), the liquid collection method for sulfur dioxide ($SO_2$) and nitrogen dioxide ($NO_2$), and the solid collection method for toluene, respectively. There is not a significant difference in the average concentration of TSP between the Gilian personal air sampler (1st, $0.316{\pm}0.095$; 2nd $0.191{\pm}0.090$; 3rd, $0.185{\pm}0.073mg/m^3$) and the remodeled sampler (1st, $0.317{\pm}0.106$, 2nd $0.201{\pm}0.050$; 3rd $0.189{\pm}0.081mg/m^3$). There are also not significant differences in the average concentration of PM10 among the Gilian personal air sampler ($0.058{\pm}0.006mg/m^3$), the remodeled sampler ($0.052{\pm}0.008mg/m^3$) and the MiniVOL portable air sampler ($0.054{\pm}0.007mg/m^3$). The average concentration of the SO2 by the established sampler and the remodeled one is $3.79{\pm}0.21ppb$ and $3.45{\pm}0.15ppb$, respectively. In addition, there are not sigmficant differences in the average concentration of the NO2 between the Gilian personal air sampler (1st, $0.325{\pm}0.068$; 2nd $0.341{\pm}0.206$; 3rd, $2.971{\pm}0.078{\mu}g/m^3$) and the remodeled sampler (1st, $0.300{\pm}0.062$; 2nd $0.332{\pm}0.144$, 3rd, $2.968{\pm}0.085{\mu}g/m^3$). There are not significant differences in the average concentration of toluene between the Gilian personal air sampler (1st, $0.499{\pm}0.072$; 2nd $0.598{\pm}0.112$; 3rd $2.284{\pm}0.077{\mu}g/m^3$) and the remodeled sampler (1st, $0.463{\pm}0.133$; 2nd $0.603{\pm}0.082$; 3rd $2.353{\pm}0.115{\mu}g/m^3$). From these results, we can conclude that the performance of the remodeled sampler is not different from that of established samplers. There is possibility that the remodeled sampler can be used as a alternative device for Gilian personal air sampler in area and personal air sampling.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.280-281
• /
• 2005

We have studied the superconducting properties and flux pinning enhancement of $(Y_{0.5}Nd_{0.25}Sm_{0.25})_{1.8}Ba_{2.4}Cu_{3.4}O_y$ [(YNS)-1.8] composite oxides by melt growth process in air. A sample prepared by this method showed well-textured microstructure, and $(Y_{0.5}Nd_{0.25}Sm_{0.25})_2BaCuO_5$ [(YNS)211] nonsuperconducting particles were uniformly dispersed in large (YNS)123 superconducting matrix. The sample showed a sharp superconducting transition at 91 K. The magnetization measurements of the (YSN)-1.8 sample exhibited the enhanced flux pinning, compared with $YBa_2Cu_3O_y$ (Y-123) sample without Sm and Nd.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1327-1330
• /
• 2015

Background: Squamous cell carcinoma (SCC) is the most common cancer in the oral area. Matrix metalloproteinases (MMPs) and especially MMP-2 and MMP-9 are increased in malignancy and lymph node involvement in oral SCCs. We aimed to evaluate the serum levels of MMP-2 and MMP-9 in patients with oral SCC compared to normal subjects and their relation with clinicopathological findings. Materials and Methods: In this case control study, 20 patients with oral SCC and 20 healthy subjects were included and serum levels of MMP-2 and MMP-9 were compared between groups. Also, the correlation between these markers with clinicopathological findings including grade (T) and node (N) were evaluated. Results: Patients with oral SCC had significantly higher serum levels of MMP-2 (p=0.01) and MMP-9 (p<0.001) compared to healthy subjects. With increase in grade T, MMP-2 was significantly increased (p=0.001), but in the MMP-9 case this was not significant (p=0.27). The levels of MMP-2 (p=0.002) and MMP-9 (p=0.01) in cases with lymph node involvement and that of MMP-2 in subjects with smoking history (p=0.001) were significantly high. There was significantly positive correlation between MMP-2 with grade T tumor (r=0.598, p=0.005), lymph node involvement (r=0.737, p<0.001) and smoking (r=0.674, p=0.001) and also between MMP-9 and lymph node involvement (r=0.474, p=0.03). Conclusions: Both markers are significantly increased in oral SCC compared to healthy subjects. However, MMP-2 was better for evaluating lymph node involvement and tumor grade.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.5
• /
• pp.419-426
• /
• 2018

$Ni-La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalysts with various $La_2O_3$ loading were investigated for hydrogen production from steam reforming of methane (SRM). The $La_2O_3$ loading influenced the physicochemical properties of $Ni-La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalysts such as BET surface area, Ni dispersion, Ni size and reducibility. Among the prepared catalysts, $Ni-70La_2O_3-Ce_{0.8}Zr_{0.2}O_2$ catalyst showed the highest activity and stability at a very high gas hourly space velocity (GHSV) of $932,556h^{-1}$. This is mainly due to high Ni dispersion, small Ni size and high reducibility.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1667-1669
• /
• 2000

The 0.8Ba($Zn_{1/3}Ta_{2/3})O_3$-0.2Ba($Co_{1/3}Nb_{2/3})O_3$ ceramics were prepared by conventional mixed oxide method. The structural properties of the 0.8BZT-0.2BCN ceramics with the sintering temperature were investigated by XRD and SEM. The 0.8BZT-0.2BCN ceramics had a superstructure reflection plane of (100), (200). Increasing the sintering temperature. the ordering parameter of B-site atoms were increased. The lattice constant of 0.8BZT-0.2BCN ceramics was 3.97${\AA}$. Increasing the sintering temperature, the average gram sizes were increased. In the case of the 0.8BZT-0.2BCN ceramics sintered at 1500$^{\circ}C$, the average grain size and bulk density were 1.56${\mu}m$, 6.93$g/cm^3$, respectively.