• 정보화정책
• /
• 제26권1호
• /
• pp.25-45
• /
• 2019

데이터 경제의 등장과 함께 빅데이터 활용에 대한 관심이 증대되었으나 개인정보보호와의 충돌이 꾸준히 제기되어 왔다. 이에 주요 국가들은 비식별화 처리된 가명정보에 대해서는 개인정보보호에서 제외하고 빅데이터 활용을 가속화하고 있다. 그러나, 이러한 정책들은 개인정보의 재화적 성격이 물밑에서 서서히 변해 감을 간과한 채 이루어진 것이다. 본 논문에서는 '수집된 정보' 개념을 제시하고 그것이 공익성을 가지고 있으므로 정보수집자의 전유물만은 아님을 정리하였다. 수집된 정보는 개인정보보호, 연결성, 보편적 서비스 및 공공재 차원에서 공익성을 가지고 있음을 알 수 있었다. 그리고 현재의 정보제공 동의를 통한 데이터 활용체제 하에서는 '데이터 거버넌스'가 작동하지 않으며, 시장실패를 개선할 수 있는 올바른 '데이터 거버넌스'를 위해서는 정보제공 동의 관행을 개선하거나 정보주체에게 이용수익권을 부여해야 할 필요성을 제시하였다.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.71-80
• /
• 2019

Purpose: In this study, to evaluate the effect of oxide changes on the shear bond strength according to the composition of Ni-Cr alloys for porcelain fused matal crown, T-4 alloys, Zeroy alloys and Zeroy-X alloys were selected. Methods: 20 specimens were fabricated using selected Ni-Cr alloys and porcelain powders. A Ni-Cr alloy having a diameter of 5 mm and a height of 25 mm was produced and the metal surface was polished. Porcelain powder was fired on the polished metal surface to a diameter of 5 mm and a height of 3 mm. The experiment group consisted of three groups, T-4(TNA), Zeroy(ZNA) and Zeroy-X(ZXA). The fabricated specimens were mounted on a jig of a universal testing machine(UTM) and fracture strength was measured by applying a shear force at a UTM crosshead speed of 0.5 mm/min. The fracture strength was calculated as the bond strength between the porcelain and the alloy. The surface of the fractured alloy was analyzed by X-ray diffraction(XRD) and scanning electron microscopy(SEM), and the components of the oxide were measured by energy dispersive X-ray spectroscopy(EDX) line profile method. Results: In SEM, XRD and EDX analysis, yttrium tended to increase the mechanical and chemical bonding forces. The shear bond strength of ZXA group containing yttrium showed the highest value at 27.53 MPa. Conclusion: Based on the results of this study, it is considered that the yttrium-added Ni-Cr alloy is clinically acceptable in porcelain shear bond strength.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.95-104
• /
• 2019

PURPOSE. To evaluate the effect of surface treatments and repair materials on the shear bond strength and to measure the fracture toughness of CAD/CAM provisional restoration materials. MATERIALS AND METHODS. Four CAD/CAM (3D printing: Nextdent C&B and ZMD-1000B Temporary, CAD/CAM resin block: Yamahachi PMMA disk and Huge PMMA block) and four conventional (monometacrylate: Jet and Alike, dimetacrylate: Luxatemp and Protemp 4) materials were selected to fabricate disk-shaped specimens and divided into six groups according to surface treatment (n=10). CAD/CAM materials were repaired with Jet or Luxatemp, while conventional materials were repaired with their own materials. The shear bond strength was measured by using universal testing machine. Ten rectangular column-shaped specimens for each material were fabricated to measure the fracture toughness by single edge v notched beam technique. Statistical analysis was performed by one-way ANOVA. RESULTS. The highest shear bond strength of CAD/CAM materials was achieved by SiC paper + sandblasting. It was also accomplished when repairing 3D printing materials with Luxatemp, and repairing CAD/CAM resin blocks with Jet. Yamahachi PMMA disk showed the highest fracture toughness. Nextdent C&B showed the lowest fracture toughness value but no statistically significant difference from Alike and Luxatemp (P>.05). CONCLUSION. In order to successfully repair the CAD/CAM provisional restoration, mechanical surface treatment and appropriate repair material according to the CAD/CAM material type should be selected. The CAD/CAM provisional materials have proper mechanical properties for clinical use as compared to conventional materials.

• Journal of Information Technology Applications and Management
• /
• 제25권3호
• /
• pp.17-28
• /
• 2018

In this paper, an activity-oriented usability model is proposed. The usability model contains two types of characteristics: special-type characteristics of usability and sub-characteristics of usability. Workability, study-ability, and playability are, but do not exhaust, examples of special-type characteristic of usability. They correspond to working, studying, and playing using the software product, respectively. They represent the goal of using and can overlap each other. They are usability too by themselves. Navigate-ability, data-prepare-ability, data-input-ability, response-wait-ability, output-examine-ability, and output-utilize-ability are typical examples of sub-characteristics of usability. They correspond to navigating, preparing data, inputting data, waiting response, examining output, and utilizing the output data, respectively. They are not usability by themselves. They constitute usability together as a group. Assessing is the fundamental and indispensable aspect of quality. Without assessing, the concept of quality has little practical value. Satisfaction, effectiveness, and efficiency are the most typical sub-characteristics of usability in existing quality models, which correspond to the evaluation criteria of usability. In the activity-oriented usability model, however, only the user's satisfaction is included: Satisfaction is regarded as the operational definition of usability in the user's view. As the result, usability can be interpreted as the 'goodness for using, which is evaluated by the user. 'Three fundamental principles regarding software quality models are proposed too in this paper: Principles of Parsimony, Cohesiveness, and Inheritance. Discussions illustrate well that typical existing usability models violate these basic principles. Many authors have tried to define general usability models which can be applied to most kinds of software. The dream of the general and universal usability model, however, may be an illusion. The activity-oriented usability model is expected to serve as a prototype from which specialized usability models can be derived.

• Advances in concrete construction
• /
• 제12권5호
• /
• pp.377-389
• /
• 2021

Reinforced concrete vertical silos are universal structures that store large amounts of granular materials. Due to the asymmetric structure, heavy load, uneven storage material distribution, and the difference between the storage volume and the storage material bulk density, the corresponding earthquake is very complicated. Some scholars have proposed the calculation method of horizontal forces on reinforced concrete vertical silos under the action of earthquakes. Without considering the effect of torsional effect, this article aims to reveal the expansion factor of the silo group considering the torsional effect through experiments. Through two-way seismic simulation shaking table tests on reinforced concrete column-supported group silo structures, the basic dynamic characteristics of the structure under earthquake are obtained. Taking into account the torsional response, the structure has three types of storage: empty, half and full. A comprehensive analysis of the internal force conditions under the material conditions shows that: the different positions of the group bin model are different, the side bin displacement produces a displacement difference, and a torsional effect occurs; as the mass of the material increases, the structure's natural vibration frequency decreases and the damping ratio Increase; it shows that the storage material plays a role in reducing energy consumption of the model structure, and the contribution value is related to the stiffness difference in different directions of the model itself, providing data reference for other researchers; analyzing and calculating the model stiffness and calculating the internal force of the earthquake. As the horizontal side shift increases in the later period, the torsional effect of the group silo increases, and the shear force at the bottom of the column increases. It is recommended to consider the effect of the torsional effect, and the increase factor of the torsional effect is about 1.15. It can provide a reference for the structural safety design of column-supported silos.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.629-637
• /
• 2023

This study aimed to evaluate the effect of post-curing equipment and time on the flexural strength of 3D printing resins produced by a liquid crystal display(LCD) printer. The three 3D printing resins(DENTCA Denture Teeth, DT; C&B 5.0 hybrid, CH; C&B Permanent A2, CP) were divided into four groups according to post-curing time(10 min and 30 min) and equipment with or without vacuum treatment. For the three-point flexural strength test and biaxial strength test were prepared by method according to ISO 10477, ISO 6872, respectively. Flexural strength was measured with universal testing machine. Comparison between post-curing time of each post-curing equipment was analyzed by independent sample t-test and Mann-Whitney U test(α=.05), and comparison between groups according to each 3D printing resin was performed by Kruskal-Wallis test and post-hoc by Bonferroni-Dunn test(α=.05). The flexural strength of the resin post-curing under vacuum was higher than that of the resin post-curing in air. In the comparison according to the post-curing time, in the case of the post-curing equipment without vacuum, the 30 minute curing time showed significantly higher flexural strength than the 10 minute curing time, except for the biaxial flexural strength of CH(P<.05). In the post-curing equipment with vacuum, the three-point flexural strength of all 3D printing resins(DT, CH, and CP) showed a higher value at 30 minute curing time than at 10 minute curing time.

• 대한의용생체공학회:의공학회지
• /
• 제44권3호
• /
• pp.182-189
• /
• 2023

CT is a medical device that acquires medical images based on Attenuation coefficient of human organs related to X-rays. In addition, using this theory, it can acquire sagittal and coronal planes and 3D images of the human body. Then, CT is essential device for universal diagnostic test. But Exposure of CT scan is so high that it is regulated and managed with special medical equipment. As the special medical equipment, CT must implement quality control. In detail of quality control, Spatial resolution of existing phantom imaging tests, Contrast resolution and clinical image evaluation are qualitative tests. These tests are not objective, so the reliability of the CT undermine trust. Therefore, by applying an artificial intelligence classification model, we wanted to confirm the possibility of quantitative evaluation of the qualitative evaluation part of the phantom test. We used intelligence classification models (VGG19, DenseNet201, EfficientNet B2, inception_resnet_v2, ResNet50V2, and Xception). And the fine-tuning process used for learning was additionally performed. As a result, in all classification models, the accuracy of spatial resolution was 0.9562 or higher, the precision was 0.9535, the recall was 1, the loss value was 0.1774, and the learning time was from a maximum of 14 minutes to a minimum of 8 minutes and 10 seconds. Through the experimental results, it was concluded that the artificial intelligence model can be applied to CT implements quality control in spatial resolution and contrast resolution.

• Geomechanics and Engineering
• /
• 제30권6호
• /
• pp.503-515
• /
• 2022

The permeability coefficient is an essential parameter for the study of seepage flow in fractured rock mass. This paper discusses the feasibility and application value of using readily available RQD (rock quality index) data to estimate mine water inflow and grouting quantity. Firstly, the influence of different fracture frequencies on permeability in a unit area was explored by combining numerical simulation and experiment, and the relationship between fracture frequencies and pressure and flow velocity at the monitoring point in fractured rock mass was obtained. Then, the stochastic function generation program was used to establish the flow analysis model in fractured rock mass to explore the relationship between flow velocity, pressure and analyze the universal law between fracture frequency and permeability. The concepts of fracture width and connectivity are introduced to modify the permeability calculation formula and grouting formula. Finally, based on the on-site grouting water control example, the rock mass quality index is used to estimate the mine water inflow and the grouting quantity. The results show that it is feasible to estimate the fracture frequency and then calculate the permeability coefficient by RQD. The relationship between fracture frequency and RQD is in accordance with exponential function, and the relationship between structure surface frequency and permeability is also in accordance with exponential function. The calculation results are in good agreement with the field monitoring results, which verifies the rationality of the calculation method. The relationship between the rock mass RQD index and the rock mass permeability established in this paper can be used to invert the mechanical parameters of the rock mass or to judge the permeability and safety of the rock mass by using the mechanical parameters of the rock mass, which is of great significance to the prediction of mine water inflow and the safety evaluation of water inrush disaster management.

• 융합경영연구
• /
• 제5권2호
• /
• pp.10-32
• /
• 2017

The landscape of corporate reporting is changing quickly. The concepts, elements and principles that characterize the way organizations plan, manage and report their annual performances are currently being questioned, debated, and redesigned throughout the world. However, widening the scope of corporate performance and reporting is a major issue. Research needs to bridge the gap between social and financial performance by considering corporate performance in a wider perspective. At base, IR is a relatively new but powerful idea: enhancing the way organizations think, plan and report the story of their business. Organizations are using IR to communicate a clear, concise, integrated story that explains how all of their resources are creating value. This paper examines the rise of what has been widely claimed to represent a new and striking future for corporate reporting, namely the notion of "Integrated Reporting" (IR). Unfortunately, there is poor empirical research work undertaken which has focused on published integrated reports. This research study provides initial analysis of the content and structure of the corporate integrated reports published in 2013 and available on the International Integrated Reporting Council (IIRC) Emerging Examples Database. As part of this study, Integrated Reports were analyzed for company information, report information and report content. Moreover, they were also evaluated as to the extent these adhered to the integrated reporting (IR) Guiding Principles, Content Elements, and the multiple capitals model. Findings of this study indicate that "early integrated reports were mostly lengthy, fail to adhere to all the guiding principles, and covered four of the six capitals suggested." At present, no universally accepted global framework for IR exists and it is still largely a voluntary practice. We believe that IR of both financial and non-financial performance should be made mandatory, and it should become a universal practice for all the global listed companies within the next 5-10 years.

• Physical Therapy Rehabilitation Science
• /
• 제12권2호
• /
• pp.105-114
• /
• 2023

Objective: The study examined the validity and reliability of tele-assessment of cervical range of motion (ROM) through video conferencing. Design: A cross-sectional study Methods: The study included 22 healthy adults as subjects and 10 physical therapists as evaluators. The subjects underwent both face-to-face and tele-assessment of cervical ROM. The CROM (Cervical Range of Motion) device was used for reference measurements in the face-to-face assessment. The evaluators assessed the subjects' ROM through visual inspection (VI) and using a Universal Goniometer (UG) in the tele-assessment. Results: The results showed a significant correlation between the face-to-face and tele-assessment measurements for all ROM contents. The correlation coefficients ranged from r=0.54 to 0.71 (p<0.05), indicating concurrent validity. In terms of inter-rater reliability, the ICC values for both VI and UG assessments in the tele-assessment were high, with ICCs of 0.93 and 0.92, respectively. Additionally, the study investigated the usability of the tele-assessment method and environment. The satisfaction of the participants and evaluators was assessed using the Telehealth Usability Questionnaire (TUQ), which evaluates perceptions, usability, and satisfaction with telehealth services. Conclusions: In conclusion, tele-assessment of cervical range of motion using video conferencing was valid and reliable. Also, investigated participant and evaluator satisfaction and opinions, providing insights into the clinical value of tele-assessment. It is important to note that the study was conducted only healthy adults, and further research may be needed to validate the tele-assessment method in populations with cervical dysfunction or neck pain. These findings support the potential effectiveness of telerehabilitation services in assessing and managing musculoskeletal disorders.