• The Journal of Advanced Prosthodontics
• /
• v.16 no.2
• /
• pp.105-114
• /
• 2024

PURPOSE. This study aimed to evaluate the effect of pretreatment of three different universal adhesives (Single Bond Universal [SBU], All-Bond Universal [ABU], and Prime&Bond universal [PBU]) on the bonding durability of an adhesive (Panavia F 2.0, PF) and a conventional (Duo-Link, DL) resin cements to air-abraded zirconia. MATERIALS AND METHODS. Rectangular-shaped zirconia specimens were prepared. The chemical composition and surface energy parameters of the materials were studied by Fourier transform infrared spectroscopy and contact angle measurement, respectively. To evaluate resin bonding to the zirconia, all the bonding specimens were immersed in water for 24 h and the specimens to be aged were additionally thermocycled 10000 times before the shear bond strength (SBS) test. RESULTS. The materials showed different surface energy parameters, including the degree of hydrophilicity/hydrophobicity. While the DL/CON (no pretreatment) showed the lowest SBS and a significant decrease in the value after thermocycling (P < .001), the PF/CON obtained a higher SBS value than the DL/CON (P < .001) and no decrease even after thermocycling (P = .839). When the universal adhesives were used with DL, their SBS values were higher than the CON (P < .05), but the trend was adhesive-specific. In conjunction with PF, the PF/SBU produced the highest SBS followed by the PF/ABU (P = .002), showing no significant decrease after thermocycling (P > .05). The initial SBS of the PF/PBU was similar to the PF/CON (P = .999), but the value decreased after thermocycling (P < .001). CONCLUSION. The universal adhesive pretreatment did not necessarily show a synergistic effect on the bonding performance of an adhesive resin cement, whereas the pretreatment was beneficial to bond strength and durability of a conventional resin cement.

• The Journal of Korean Philosophical History
• /
• no.25
• /
• pp.333-354
• /
• 2009

Zhuangzi contends that one of the reasons to cause life difficulties is mistaking the truth of cosmos and the existence meaning of human. There is no difference of value between the existence of human and universal creatures. However, "human mind" can not being peaceful because of " ChengXin(成心)" causes the difference of right and wrong. Zhuangzi contends the ideal world is "ZhiDe zhi World(至德之世)" of unmoved mind. Because of the value of "RenYiDaoDe(仁義道德)" in politics, the status of ideal existence of human and creatures is destroyed, i.e., disturbing the status of peaceful mind. This is also a reason of life difficulties. Zhuangzi contends the reasonable relationship of human and creatures is to recognize creatures as creatures, and therefore, there is no difference of value between creatures. Additionally, one shall understand the concept of "universal creatures are the same(萬物?一)" is based on the fact of continuous change of universal creatures. The socalled concept of "universal creatures are the same(萬物?一)" in Zhuangzi's thought is based on three dimensions: one is the materials of forming universal creatures; one is the same meaning of "Hisn" between human and creatures, and universal creatures are continuously changing. Therefore, one shall get a clear understanding of the nature of things, and one may treat the universal creatures in the concept of "universal creatures are the same(萬物?一)".

• Journal of Korean Library and Information Science Society
• /
• v.42 no.4
• /
• pp.181-201
• /
• 2011

The recent diversification of society surrounding libraries is influencing the services of libraries. This study suggested the directions of public library services from the aspect of the universal design based on the analysis of related systems and cases to provide all users with universal services in accord with the nature of public libraries amid rapidly changing social environment. This study suggests four directions: the "universal design" which is the keyword for pursuing universality of public library services; the pursuit of economic value of public library services based on the universal design; the universal design for the improvement of perception of public library services; change in policies and systems related to public library services through the application of the universal design.

• Radiation Oncology Journal
• /
• v.20 no.1
• /
• pp.24-33
• /
• 2002

Purpose : In order to improve dose homogeneity and to reduce acute toxicity in tangential whole breast radiotherapy, we evaluated two treatment techniques using multiple static fields or universal compensators. Materials and Methods : 1) Multistatic field technique : Using a three dimensional radiation treatment planning system, Adac Pinnacle 4.0, we accomplished a conventional wedged tangential plan. Examining the isodose distributions, a third field which blocked overdose regions was designed and an opposing field was created by using an automatic function of RTPS. Weighting of the beams was tuned until an ideal dose distribution was obtained. Another pair of beams were added when the dose homogeneity was not satisfactory. 2) Universal compensator technique : The breast shapes and sizes were obtained from the CT images of 20 patients who received whole breast radiation therapy at our institution. The data obtained were averaged and a pair of universal physical compensators were designed for the averaged data. DII (Dose Inhomogeneity Index : percentage volume of PTV outside $95\~105\%$ of the prescribed dose) $D_{max}$ (the maximum point dose in the PTV) and isodose distributions for each technique were compared. Results : The multistatic field technique was found to be superior to the conventional technique, reducing the mean value of DII by $14.6\%$ (p value<0.000) and the $D_{max}$ by $4.7\%$ (p value<0.000). The universal compensator was not significantly superior to the conventional technique since it decreased $D_{max}$ by $0.3\%$ (p value=0.867) and reduced DII by $3.7\%$ (p value=0.260). However, it decreased the value of DII by maximum $18\%$ when patients' breast shapes fitted in with the compensator geometry. Conclusion : The multistatic field technique is effective for improving dose homogeneity for whole breast radiation therapy and is applicable to all patients, whereas the use of universal compensators is effective only in patients whose breast shapes fit inwith the universal compensator geometry, and thus has limited applicability.

• The Korean Journal of Health Service Management
• /
• v.12 no.2
• /
• pp.89-99
• /
• 2018

Objectives : To compare the degree of achievement of Universal Health Coverage (UHC) among 39 developing countries in Africa and to investigate the correlation between health care financing and the UHC index. Methods : For data, 14 UHC indexes were used in 2015 supplied by the World Health Organization (WHO). In addition, this study used a 10% of threshold point corresponding to the catastrophic health expenditures and a 25% of threshold points as a health care financing index. Results : It was found that there were significant difference among Least Low Developed Countries (LLDCs), Other Low Income Countries (Other LICs), Lower Middle Income Countiies (LMICs), Upper Middle Income Countires (UMICs) to compare the average value by nation on the UHC index. This study showed that the UHC index of LLDCs was lowest, but the average value was higher as it moved towards LMICs and UMICs. In addition, it was found that there was an average value difference among the groups like LLDCs, Other LICs, LMICs and UMICs. As a result of comparison, it was found that the spending of household health expenditure increased as LLDCs moved towards UMICs when the burden of household health expenditure was 25%. Conclusions : This study aimed to compare the UHC indexes of African nations and to investigate the correlation between the degree of spending of total expenditure on health and burden of household health expenditure and UHC, and its effect.

• The Journal of Korean Philosophical History
• /
• no.28
• /
• pp.61-85
• /
• 2010

This is about studying on the environmental ethics of Taoism mainly based on Taoism's Bioautonomous. Taoism is the most comprehensive thought in the traditional thoughts of East Asia. According to Taoism, every individual bio has its own intrinsic value having nothing to do with the value estimated by human beings since it has Daoxing. Human beings, however, have their own bioautonomous which is different from other individual bio. In Taoism human beings are independent for their lives. They do not depend on nature, but they can control themselves. That is to say, their lives depend not on god but on their own wills. The human beings' bioautonomous includes two different meanings: one is that human beings can use other individual bio as a tool for their eternal youth, and the other is that human beings are the main character of realizing the intrinsic value of universal bio and bringing harmony into each individual bio. In Taoism the harmony of universal bio is considered as the top value. Realizing the value of human beings is based on keeping harmonious order of universal bio and realizing the value of other individual bio. the environmental ethics of Taoism is not Biocentrism. Biocentrism argues that each individual bio has teleological center of life, which pursues its own good in its own way, and possesses equal members of Earth's community. As a result, human beings role and responsibility was reduced. But Taoism insists on human beings' bioautonomous. And human beings should be responsible for universal bio's harmony. Therefore the environmental ethics of Taoism is not Biocentrism but Bioautonomous. Bioautonomous environmental ethics of Taoism insists on human beings should be responsible being in relation with other living beings. Because of this point, it can be a theory of biorecovery.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.323-331
• /
• 2008

Flexibility and fracture properties determine the performance of NiTi rotary instruments. The purpose of this study was to evaluate how geometrical differences between three NiTi instruments affect the deformation and stress distributions under bending and torsional conditions using finite element analysis. Three NiTi files (ProFile .06 / #30, F3 of ProTaper and ProTaper Universal) were scanned using a Micro-CT. The obtained structural geometries were meshed with linear, eight-noded hexahedral elements. The mechanical behavior (deformation and von Mises equivalent stress) of the three endodontic instruments were analyzed under four bending and rotational conditions using ABAQUS finite element analysis software. The nonlinear mechanical behavior of the NiTi was taken into account. The U-shaped cross sectional geometry of ProFile showed the highest flexibility of the three file models. The ProTaper, which has a convex triangular cross-section, was the most stiff file model. For the same deflection, the ProTaper required more force to reach the same deflection as the other models, and needed more torque than other models for the same amount of rotation. The highest von Mises stress value was found at the groove area in the cross-section of the ProTaper Universal. Under torsion, all files showed highest stresses at their groove area. The ProFile showed highest von Mises stress value under the same torsional moment while the ProTaper Universal showed the highest value under same rotational angle.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.2
• /
• pp.25-37
• /
• 2021

Purpose: The main purpose of this study is to develop an evaluation system using the weighted-values of various users and experts for the public space to apply Universal Design, and additionally to find out the commonalities and differences by comparing the importance of evaluation indicators between users and expert groups. Method: A one-sample t-test was conducted to verify that the components of the public space to universal design application are suitable as evaluation indicators, and AHP(analytic hierarchy process) was performed to derive weight-values for the evaluation system. Results: The importance-values for the total 23 facilities to be used as evaluation indicators were derived by multiplying the weighted-values of each sector, domain, and facility by the disabled, non-disabled, and experts. To summarize the results of overall importance-values derived from the AHP, The disabled showed high-rank weighted-values in facilities of building sector > park & recreation sector > cross domain and low-rank weighted-values for sidewalk and roadway domain. The non-disabled showed high-rank weighted-values in facilities of park & recreation sector > roadway domain > building sector > cross domain and low-rank weighted-values for sidewalk domain. Experts mainly showed high-rank weighted-values in the cross domain and in facilities related to entry and movement to the target space in all sectors and domains. However, it showed moderate importance-values in the sanitary space. The disabled who are restricted to movement have a high demand for universal design in buildings consisting of vertical moving line, and non-disabled people who are not limited to physical movement have a high demand for universal design in parks and recreation sector for increased leisure time. It means that experts are important to recognize the principles of making space because they value cross domain and the key spaces and facilities for suitable the purpose of use. In addition, it can be inferred that non-disabled people have a higher demand for safety than disabled people due to their high importance in roadway domain and facilities of safety and disaster prevention. Implications: The significance of this study is the establishment of a quantitative universal design evaluation system for public spaces considering the different perspectives of the disabled and the non-disabled.

• Journal of architectural history
• /
• v.32 no.2
• /
• pp.21-35
• /
• 2023

The purpose of this study is to develop a method for establishing an educational system for World Heritage interpretation applicable to World Heritage sites and to design an education program for World Heritage interpretation by applying the developed education system in this study. This study first identified the definition of interpretation and the relationship between interpretation and education through previous research and analyzed the role and significance of heritage interpretation due to the paradigm transition in the capacity building of World Heritage sites. Next, the educational status of World Heritage interpretation was analyzed through educational institutions, educational subjects, and curriculum examples. Finally, this study argues that a method for establishing a World Heritage interpretation education system should be presented according to the composition of the curriculum, and the interpretation curriculum planning by interpreters should be proposed focusing on the Outstanding Universal Value (OUV) of World Heritage sites.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.57-66
• /
• 2012

The purpose of this study was to evaluate the relation between intentionally induced internal stress and cyclic fatigue failure of ProTaper Universal. ProTaper Universal (Dentsply Maillefer) S1, S2, F1, F2, F3, F4 and F5 (25 mm length) were used in this study. To give the internal stress, the ProTaper Universal were put into the .02 taper Endo-Training-Bloc (Dentsply Maillefer) until auto-stop by torque controlled motor. The rotation speed was 300 rpm and torque value was 1.0 Ncm. ProTaper Universal were grouped by the induced number of internal stress and randomly distributed among one control group and three experimental groups (n=10). The four groups were Stress 0 (control), Stress 1, Stress 2 and Stress 3. These instruments were rotated until separation. For cyclic fatigue measurement, inclined plane was used and time for separation was recorded. It was statistically analyzed using two-way ANOVA and Duncan post-hoc test at 95% confidential level. In all ProTaper Universal, there was statistically significant decrease on time for separation in Stress 3. In F2 and F3, there were statistically significant difference between control group and all experimental groups. And in F4 and F5, Stress 2 and 3 groups showed significantly lower cyclic fatigue resistance from Stress 0 group. In the limitation of this study, cyclic fatigue failure of ProTaper Universal is influenced by accumulated internal stress.