• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.83-91
• /
• 2015

Few studies have investigated soil management policy and soil erosion measurement, whereas the occurrence of climate change requires the establishment of robust soil management systems and appropriate control of soil erosion. In this study, we developed a smart sensor for real-time quantitative measurements of soil erosion at the watershed scale. The smart sensor consists of an ultrasonic sensor, a rainfall meter, a solar cell, an RTU (remote terminal unit),and a CDMA (code division multiple access) and it was programmed to take a measurement every 30 minutes. The depths measured by the smart sensor were compared with data from terrestrial LiDAR. Experimental results showed a strong correlation in the depth of soil erosion between LiDAR and the ultrasonic sensor for the period from 22 August to 11 October 2013. Furthermore, the correlation coefficient between soil erosion depth (mm) and soil erosion volume (m³) was 0.9063 in the lower region of the watershed and is 0.9868 in the upper region. The proposed ultrasonic sensor technique can provide high-quality data for soil conservation and management systems in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.480-488
• /
• 2018

The development of information and communication technology has been carried out actively in the field of agriculture to generate valuable information from large amounts of data and apply big data technology to utilize it. Crops and their varieties are determined by the influence of the natural environment such as temperature, precipitation, and sunshine hours. This paper derives the climatic factors affecting the production of crops using the garlic growth process and daily meteorological variables. A prediction model was also developed for the production of garlic per unit area. A big data analysis technique considering the growth stage of garlic was used. In the exploratory data analysis process, various agricultural production data, such as the production volume, wholesale market load, and growth data were provided from the National Statistical Office, the Rural Development Administration, and Korea Rural Economic Institute. Various meteorological data, such as AWS, ASOS, and special status data, were collected and utilized from the Korea Meteorological Agency. The correlation analysis process was designed by comparing the prediction power of the models and fitness of models derived from the variable selection, candidate model derivation, model diagnosis, and scenario prediction. Numerous weather factor variables were selected as descriptive variables by factor analysis to reduce the dimensions. Using this method, it was possible to effectively control the multicollinearity and low degree of freedom that can occur in regression analysis and improve the fitness and predictive power of regression analysis.

• Journal of Korean Medical classics
• /
• v.20 no.2
• /
• pp.175-193
• /
• 2007

A theory of the school which attach great importance to moxibustion therapy was more developed from 'Ge Hong(葛洪)', 'Wang Tao(王燾)' up to "BianQueXinShu(扁鵲心書)" of 'Dou Cai(竇材)' in Song Dynasty. The first volume of "BianQueXinShu" was described about the principles of health preserving method, diagnosis, treatment related with meridian system, support Yang theory, moxibustion therapy over the 10 chapters and in the continued 3 chapters, explained the symptoms and related moxibustion therapies. The summary is as follows. The Yang energy is the essence of the human body and it is minutely explained in "Hwangdineijing(黃帝內經)". However, the younger scholars after 'Zhang Zhongjing(張仲景)' held different views with "Hwangdineijing" so they didn't control serious diseases. Supporting the Yang energy, it will be possible to human body in good health and long life and perennial youth and longevity. To do like this, the first important thing is a moxibustion, the second is a Taoist hermit medication(丹藥) and the third is well usage of Radix Aconiti Lateralis Preparata. According to the sequence of Yang energy deficiency, the stages of diseases are classified as Ordinary Gi(平氣), Latter deficient state(微虛), The more deficient state(甚虛), Exhausting state(將脫), Exhausted state(已脫) and in the consideration of each stage, it is used gradually with warm-natured berbs, warm-acrid herbs, warm-heated herbs and moxibustion therapy. If it comes to the stage of Exhausted state, the Yang energy is too weak to treat a disease. Therefore it is easy to harm human body with usage the treatment of the Purgationist school theory or the Cold and cool medical school theory, so it is needed a great attention to use these therapies. To summarized the keynote of 'Du Jae''s moxibustion therapy, the one is a minority of selection of points(1$^{\sim}$2 acupuncture points), the second is a majority of moxibustion units(50$^{\sim}$500 units), and the other is a focused selection of points on spleen and kidney(especially Gwanwon, CC4). And in this book, it was explained concretely about the size of moxibustion, according to the experiment with mentioned size, the burning time of moxibustion was almost 4 min 40 sec, so the big size moxibustion was one of the characteristic of moxibustion therapy revealed in this book. Also it was used 'Suseongsan(睡聖散)' - a kind of analgesic herb complexes - to reduce a pain during the usage of moxibustion therapy in this book. To develop the moxibustion theory, it is more investigated in the future that there wasn't significant relation between Gwanwon(CC4) and spleen and kidney meridian in theory, compared to many used Gwanwon(CC4) in the prescription, where as mentioned the importance of spleen and kidney in treatment, that considering the burning time(1 unit - 4 min 40 sec, 12 units an hour, maximum 288 units a day) there were no guidances about meals, sleeping, stool and urine, and that there was no concrete study about the toxicity of 'Suseongsan' as analgesic moxibustion therapy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.226-234
• /
• 2017

The physical properties of lightweight foamed concrete mixed with EPS waste and flame resistant EPS waste were investigated. For this purpose, the main variables considered were a cement content of 300 and $400kgf/m^3$ and an EPS replacement ratio of 0, 10, 20, 30, and 40% by the volume ratio of the foam. The water-cement ratio and the dilution concentration were fixed to 0.5 and 10% respectively. The test results showed that the apparent density meets degrees 0.5 and 0.6 of KS F4039, and they showed little difference between the two mixes of Type A and Type B, regardless of the unit cement content. The bending strength obtained through the compressive strength also met the degree of KS F 4039. The thermal conductivity was 1~3% higher for the mixes of EPS than the case of flame resistant EPS, but both mixes met the 0.4 degree of KS F4039. The absorption ratio showed the values above 20% with a 1~3% difference for the two mixes, which mean further studies will be needed to reduce the absorption ratio.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.513-520
• /
• 2016

It is well known that volatile compounds including disinfection by-products as well as emissive dissolved gas in water can be removed effectively by air stripping. The micro-bubbles of flotation unit are so tiny as microns while the diameter of fine bubbles applied to air stripping is ranged from hundreds to thousands of micrometer. Therefore, the micro-bubbles in flotation can supply very wide specific surface area to transfer volatile matters through gas-liquid boundary. In addition, long emission time also can be gained to emit the volatile compound owing to the slow rise velocity of micro-bubbles in the flotation tank. There was a significant difference of the THMs species removal efficiency between air stripping and flotation experiments in this study. Moreover, the results of comparative experiments on the removal characteristics of THMs between air stripping and flotation revealed that the mass transfer coefficient, $K_La$ showed obvious differences. To overcome the limit of low removal efficiency of dissolved volatile compounds such as THMs in flotation process, the operation range of bubble volume concentration is required to higher than the operation condition of conventional particle separation.

• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.194-200
• /
• 2011

Diamondback moth (DBM, Plutella xylostella L.) is known as the most destructive pest of cruciferous crops worldwide. As most insecticides targeted to mainly larval stage, new insecticides which have hatching-inhibitory or ovicidal activity could be more efficient to control DBM. Therefore, we developed an easy and efficient method for screening ovicidal activity of DBM eggs using aluminum foil. The aluminum foil ($4{\times}12$ cm) coated with filtered juice of chinese cabbage leave (hereinafter called oviposition foil) exposed to 300 newly-emerged adults for 24 hours inside the rearing container. The oviposition foils were replaced every 4 days consecutively after mating, but it was better to discarded over then. Oviposition foil were divided into 6 to 12 pieces depending on egg mass volume. After dipping into test solutions for 10 seconds using faucet, oviposition foil pieces were placed into common petri dish, and then investigated hatchability. The effect of methanol solvent (50%) for 10 seconds dipping on the toxicity against DBM eggs was negligible. In addition, whether covering the petri dish or not should be dependent on nature of active compounds tested. With applying the new bioassay method, methanol extracts from 50 plants were tested the ovicidal activity to DBM eggs. Among them, four plant extracts; Angelica tenuissima root, Lycium chinense root, Cnidium officinale root and Polygala tenuifolia root, showed high ovicidal activity of over 90% control efficacy, against DBM eggs.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.3
• /
• pp.178-188
• /
• 2009

A blog is a personal website where its owner publishes his/her articles for others. A blog can have relationships with other blogs. In this paper, we define a network that is composed of blogs connected together with such relationships as a blog network. Blog networks can have two different propensities characterized by the articles published in the blogs: information-valued propensity and friendship-valued propensity. The degree of each propensity of a blog network plays an important role in deciding business policies for blog networks. In this paper, we address the problem of determining the degrees of two propensities of a given blog network. First, we determine the degree of the propensity of every relationship, a basic unit of a blog network, by using classification that is one of data mining functionalities. Then, by utilizing the result thus obtained, we compute the degrees of two propensities of the whole blog network. Also, we propose a method to solve the problem that the degree of propensities depends on the size of blog networks. To verify the superiority of the proposed approach, we perform extensive experiments using a huge volume of real-world blog data. The results show that our approach provides high accuracy of around 93% in determining the degrees of both propensities of relationships between arbitrary two blogs. We also verify the applicability of the proposed approach by showing that if determines the degrees of the information-valued and friendship-valued propensities correctly in real-world blog networks.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.449-456
• /
• 2016

This study was aimed to quantify the amount of carbon dioxide emissions and to suggest suitable plans which consider the carbon emission reduction in the manufacturing process of the domestic structural glued laminated timber. Field investigation on two glued laminated timber manufacturers was conducted to find out material flow input values such as raw materials, transportation, manufacturing process, and energy consumption during manufacturing process. Based on the collected data and the relevant literatures about life cycle inventory (LCI), the amount of carbon dioxide emission per unit volume was quantified. Results show that the carbon dioxide emissions for sawing, drying and laminating process are 31.0, 109.0, 94.2 kg $CO_2eq./m^3$, respectively. These results show 13% lesser amount of total carbon dioxide emissions compared with the imported glued laminated timber in Korea. Furthermore, it was decreased about 37% when the fossil fuel would be replaced with biomass fuel in drying process. Findings from this study is effectively used as the basic data on the life cycle assessment of wooden building.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.325-335
• /
• 2008

In this study, we used multi-channels ceramic membrane having larger permeate volume per unit time rather than tubular membrane. The hybrid process for advanced drinking water treatment was composed of granular activated carbons (GAC) packing between module inside and outside of multi-channels microfiltration membrane. Instead of natural organic matters (NOM) and fine inorganic particles in natural water source, modified solution was prepared with humic acid and kaolin. Kaolin concentration was fixed at 30mg/L and humic acid was changed as $2{\sim}10\;mg/L$ to inspect effect of organic matters. As a result, both resistance of membrane fouling ($R_f$) and permeate flux (J) were highly influenced by concentration of humic acid. Also, in result of water-back-flushing period (FT) effect, the shorter FT was the more effective to reduce membrane fouling and to enhance permeate flux because of frequent water-back-flushing. However, the optimal FT condition was 8 min when operating costs were considered. Then, the hybrid process using multi-channels ceramic membrane and GAC was applied to lake water treatment. As a result, average treatment efficiencies in our experiment using the hybrid process were 98.02% for turbidity, 75.64% for $UV_{254}$ absorbance, 7.18% for TDS and 84.73% for $COD_{Mn}$.

• Tuberculosis and Respiratory Diseases
• /
• v.80 no.3
• /
• pp.296-303
• /
• 2017

Background: Acute respiratory distress syndrome (ARDS) is related to high mortality and morbidity. There are no proven therapeutic measures however, to improve the clinical course of ARDS, except using low tidal volume ventilation. Metformin is known to have pleiotropic effects including anti-inflammatory activity. We hypothesized that pre-admission metformin might alter the progress of ARDS among intensive care unit (ICU) patients with diabetes mellitus (DM). Methods: We performed a retrospective cohort study from January 1, 2005, to April 30, 2005 of patients who were admitted to the medical ICU at Seoul National University Hospital because of ARDS, and reviewed ARDS patients with DM. Metformin use was defined as prescribed within 3-month pre-admission. Results: Of 558 patients diagnosed with ARDS, 128 (23.3%) patients had diabetes and 33 patients were treated with metformin monotherapy or in combination with other antidiabetic medications. Demographic characteristics, cause of ARDS, and comorbid conditions (except chronic kidney disease) were not different between metformin users and nonusers. Several severity indexes of ARDS were similar in both groups. The 30-day mortality was 42.42% in metformin users and 55.32% in metformin nonusers. On multivariable regression analysis, use of metformin was not significantly related to a reduced 30-day mortality (adjusted ${\beta}-coefficient$, -0.19; 95% confidence interval, -1.76 to 1.39; p=0.816). Propensity score-matched analyses showed similar results. Conclusion: Pre-admission metformin use was not associated with reduced 30-day mortality among ARDS patients with DM in our medical ICU.