• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.327-333
• /
• 2017

The purpose of this research was to analyze characteristics of verbal interactions of each homogeneous group in the learning of the 6th grade's 'Use of Lenses' Unit. For this research, six learning sessions were conducted in one 6th grade class composed of a high-academic-achievement group, an intermediate-academic-achievement group, and a low-academic-achievement group. All lessons were recorded, to analyze the verbal interactions of each group, and the transcribed data were analyzed using the verbal-interaction analytic framework. Results included: In the upper group, although opinions were presented more frequently, there were many negative verbal interactions in completing the tasks. The middle group was observed more specifically to accept peer opinions critically in their observational activities. The middle group's members were more active in presenting their opinions than listening to others' opinions. The lower group had difficulties in drawing conclusions because of a lack of ability to persuade peers or to respect the opinions of peers, even though the frequency of verbal interactions was higher than in other groups. Therefore, a homogeneous group structure is good for a simple activity involving a simple inquiry or an exchange of opinions, while a heterogeneous group structure is more effective in activities focused on understanding scientific concepts and knowledge.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1995.10a
• /
• pp.15.2-22
• /
• 1995

Evaluating stiffness of near-surface materials has been one of the critically important tasks in many civil engineering works. It is the main goal of geotechnical characterization. The so-called deflection-response method evaluates the stiffness by measuring stress-strain behavior of the materials caused by static or dynamic load. This method, however, evaluates the overall stiffness and the stiffness variation with depth cannot be obtained. Furthermore, evaluation of a large-area geotechnical site by this method can be time-consuming, expensive, and damaging to many surface points of the site. Wave-propagation method, on the other hand, measures seismic velocities at different depths and stiffness profile (stiffness change with depth) can be obtained from the measured velocity data. The stiffness profile is often expressed by shear-wave (S-wave) velocity change with depth because S-wave velocity is proportional to the shear modulus. that is a direct indicator of stiffiiess. The crosshole and downhole method measures the seismic velocity by placing sources and receivers (geophones) at different depths in a borehole. Requirement of borehole installation makes this method also time-consuming, expensive, and damaging to the sites. Spectral-Analysis-of-Surface-Waves (SASW) method places both source and receivers at the surface, and records horizontally-propagating surface waves. Based upon the theory of surfacewave dispersion, the seismic velocities at different depths are calculated by analyzing the recorded surface-wave data. This method can be nondestructive to the sites. However, because only two receivers are used, the method requires multiple measurements with different field setups and, therefore, the method often becomes time-consuming and labor-intensive. Furthermore. the inclusion of noise wavefields cannot be handled properly, and this may cause the results by this method inaccurate. When multi-channel recording method is employed during the measurement of surface-waves, there are several benefits. First, usually single measurement is enough because multiple number (twelve or more) of receivers are used. Second, noise inclusion can be detected by coherency checking on the multi-channel data and handled properly so that it does not decrease the accuracy of the result. Third, various kinds of multi-channel processing techniques can be applied to f1lter unwanted noise wavefields and also to analyze the surface-wavefields more accurately and efficiently. In this way, the accuracy of the result by the method can be significantly improved. Fourth, the entire system of source, receivers, and recording-processing device can be tied into one unit, and the unit can be pulled by a small vehicle, making the survey speed very fast. In all these senses, multi-channel recording of surface waves is best suited for a routine method for geotechnical characterization in most of civil engineering works.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.20-27
• /
• 2003

Hazard Analysis is one of the basic tasks to ensure the safety of chemical plants. However, it is an arduous, tedious, time-consuming work and requires multidisciplinary knowledge and demands considerable cognitive load from the analysts. To overcome these problems, there have been attempts to automate this work by utilizing computer technology, particularly in the area of knowledge-based technique. There is two methods in the risk assessment of Chemical plant; quantitative and qualitative risk assessment. Both of them have been applied respectively, but if the integrated method of quantitative and qualitative risk assessments is used, all of the advantage of two methods can be applied. It is difficult to carry out integrated risk management of chemical plant. Therefore, automated integration system of risk management is necessary. We developed S/W Automated System for Hazard Screening & Analysis(ASCA) and applied to practical plant. By applying ASCA to case study, we can get the information about relative ranks of equipments, variable deviation, and consequence of potential accident. In this study, we applied ASCA to the H.T.U(Hydrotreating Unit) of the process to produce aromatic material. We could know relative ranks of equipments, variable deviation of malfunction in storage tank, D-101, and consequence of potential accident using ASCA. If integrated risk management in the chemical plant is applied, we can develop the emergency plan and prevent the accident.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.17-27
• /
• 2022

In this paper, ED-H algorithm, an optimal real-time scheduling algorithm dealing with the characteristics of the integrated energy harvester system with a capacitor, is extended to satisfy the time constraint under the blackout state which is a deliberate power-off state by an intelligent power management unit adopted in the system. If the power supply system does not have enough energy, it temporarily shuts off the power supply to protect the circuit and capacitor and resumes the supply again when the capacitor is fully charged, which may delay the task execution during these blackout states by calculating the time according to the occurrence of the events. To mitigate the problem, even if task execution is delayed by the original ED-H algorithm, the remaining time of the subsequent time units no longer can afford to delay the execution of the task is predicted in the extended algorithm and the task is forced to be scheduled to meet the time deadline. According to the simulation results, it is confirmed that the algorithm proposed in this paper has a high scheduling performance increase of 0.4% to 7.7% depending on the characteristics of the set of tasks compared to the ED-H.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.289-295
• /
• 2012

In recent years, an increased amount of research has been carried out on mobile robots to improve the performance of service robots. Mobile robots maximize the mobility of service robots, thus allowing them to work in different areas. However, conventional service robots have their center of mass placed high above the ground, which may cause them to fall when moving at high speed. Furthermore, hub-type actuators, which are often used for mobile robots, are large and expensive. In this study, we propose a mobile robot with a hub-type actuator unit and a variable footprint mechanism. The proposed variable footprint mechanism greatly improves the stability and mobility of the robot, allowing it to move freely in a narrow space and carry out various tasks. The performance of the proposed robot is verified experimentally.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.52-57
• /
• 2012

Objectives: Lifting heavy weights involves the Valsalva manoeuvre, which leads to intraocular pressure spikes. We used data from a case-control study to further investigate the hypothesis that occupational lifting is a risk factor for retinal detachment. Methods: The study population included 48 cases (patients operated for retinal detachment) and 84 controls (outpatients attending an eye clinic). The odds ratios (OR) of idiopathic retinal detachment were estimated with a logistic regression model (adjusted for age, sex and body mass index). Three indexes were used to examine exposure to lifting; 1) maximum load lifted, 2) average weekly lifting, 3) lifelong cumulative lifting. Results: For all indexes, the most exposed subjects showed an increased risk of retinal detachment compared with the unexposed (index 1: OR 3.57, 95% confidence interval [CI] 1.21-10.48; index 2: OR 3.24, 95% CI 1.32-7.97; index 3: OR 2.23, 95% CI 1.27-8.74) and dose-response relationships were apparent. Conclusion: These results reinforce the hypothesis that heavy occupational lifting may be a relevant risk factor for retinal detachment.

• Journal of Information Processing Systems
• /
• v.9 no.1
• /
• pp.117-140
• /
• 2013

Hindi is the most widely spoken language in India, with more than 300 million speakers. As there is no separation between the characters of texts written in Hindi as there is in English, the Optical Character Recognition (OCR) systems developed for the Hindi language carry a very poor recognition rate. In this paper we propose an OCR for printed Hindi text in Devanagari script, using Artificial Neural Network (ANN), which improves its efficiency. One of the major reasons for the poor recognition rate is error in character segmentation. The presence of touching characters in the scanned documents further complicates the segmentation process, creating a major problem when designing an effective character segmentation technique. Preprocessing, character segmentation, feature extraction, and finally, classification and recognition are the major steps which are followed by a general OCR. The preprocessing tasks considered in the paper are conversion of gray scaled images to binary images, image rectification, and segmentation of the document's textual contents into paragraphs, lines, words, and then at the level of basic symbols. The basic symbols, obtained as the fundamental unit from the segmentation process, are recognized by the neural classifier. In this work, three feature extraction techniques-: histogram of projection based on mean distance, histogram of projection based on pixel value, and vertical zero crossing, have been used to improve the rate of recognition. These feature extraction techniques are powerful enough to extract features of even distorted characters/symbols. For development of the neural classifier, a back-propagation neural network with two hidden layers is used. The classifier is trained and tested for printed Hindi texts. A performance of approximately 90% correct recognition rate is achieved.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.185-192
• /
• 1995

A common control model used to implement computer integrated manufacturing(CIM) is based on the hierarchical decomposition of the shop floor activities, in which supervisory controllers are responsible for all the interactions among subordinates. Although the hierarchical control philosophy provides for easy understanding of complex systems, an emerging manufacturing paradigm, agile manufacturing, requires a new control structure necessary to accommodate the rapid development of a shop floor controller. This is what is called CSCW(computer supported cooperative work)-based control or component-based heterarchical control. As computing resources and communication network on the shop floor become increasingly intelligent and powerful, the new control architecture is about to come true in a modern CIM system. In this paper, CSCW-based control is adopted and investigated, in which a controller for a unit of device performs 3 main functions - planning, scheduling and execution. In this paper, attention is paid to a planning function and all the detailed planning activities for CSCW-based shop floor control are identified. Interactions with other functions are also addressed. Generally speaking, planning determines tasks to be scheduled in the future. In other words, planning analyzes process plans and transforms process plans into detailed plans adequate for shop floor control. Planning is also responsible for updating the process plan and identifying/resolving replanning activities whether they come from scheduling or execution.

• Journal of KIISE:Software and Applications
• /
• v.37 no.1
• /
• pp.19-28
• /
• 2010

Recently, various home appliances are inter connected in wired/wireless network to provide a single service, but their interfaces are not uniformly integrated. In order to get a service in such an environment, users have to figure out how to control each appliance and the way of combining its functions with others. Even worse to the users, many buttons are barely used to control the complicated functions of the appliances on the remote controllers, and controllers have very similar shapes in each other. In this paper, based on the definitions of a task as a unit of services provided in the environment of multi-connected appliances, we propose a markup language for home appliances, called HAML (Home Appliance Markup Language), for generating task-based user interfaces to help controlling multi-connected appliances as one pleases. The proposed method generates interfaces by gathering the buttons frequently used and necessary for tasks, and provides automatic settings of multi-connected appliances. The proposed method is verified with an analysis of scenarios and usability tests.

• Journal of Distribution Science
• /
• v.15 no.1
• /
• pp.115-121
• /
• 2017

Purpose - Although ensuring that all the organizational members know their roles exactly is an important part of managerial work, few studies address the role clarity in food manufacturing and distribution firms. Role clarity refers to the extent to which individuals clearly understand the tasks, duties, responsibilities, and expectations of their work roles (Hinkin & Schriesheim, 2008). The purpose of this study is to examine the effect of the role clarity on organizational commitment and the mediating role of creativity in the role clarity-organizational commitment relationship. Research design, data, and methodology - Data were collected from 297 employees in food manufacturing and distribution firms of Korea by self-evaluations questionnaires. The unit of the analysis for testing is an individual. We proposed four hypotheses: (1) is about the relationship between role clarity and organizational commitment, (2) is about the relationship between role clarity and creativity, (3) is about the relationship between creativity and organizational commitment, and (4) is about the mediating role of creativity. We conducted the hierarchical regression analysis for testing the main and mediating effects. Results - The results of the study indicated that the role clarity was positively associated with organizational commitment and creativity. Results also indicated that the creativity was positively associated with organizational commitment. Especially, the impact of the role clarity on organizational commitment was mediated by creativity. Conclusions - An important contribution of this study is extending prior theory on the relationship between role clarity and organizational commitment by shedding new light on assumptions regarding the mediating effect of creativity. The results demonstrate that the role clarity has an indirect effect as well as a direct effects on organizational commitment. Our research suggests important implications for organizations that pursue to stimulate their employees' creativity, emphasizing the importance of the role clarity. This study has several potential limitations. Maybe the most serious limitation is its cross-sectional study design. Another limitation is the use of employees' self-reports to measure the variables. In the future, researchers should employ a longitudinal study design and use diverse sources of data.