• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.655-663
• /
• 2005

Tribological characteristics in the sliding parts of oil hydraulic piston pumps are very important in increasing overall efficiency. In this study, the fluid film between the valve plate and the cylinder block was measured by using a gap sensor and the mercury-cell slip ring unit under real working conditions. To investigate the effect of the valve shape, we designed three valve plates each having a different shape. One of the valve plates was without bearing pad, another valve plate had bearing pad and the last valve plate was a spherical valve plate. It was noted that these three valve plates observed different aspects of the fluid film characteristics between the cylinder block and the valve plate. The leakage flow rates and the shaft torque were also investigated in order to clarify the performance difference between these three types of valve plates. From the results of this study, we found that the spherical valve plate estimated good fluid film patterns and good performance more than the other valve plates in oil hydraulic axial piston pumps.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.673-677
• /
• 2014

In this paper, thermal analysis of HDU (Heat Dissipation Unit) for infrared CCTV is performed by using SolidWorks Simulation (Thermal analysis) package, in order to change the part materials and HDU shape is optimized. Furthermore, HDU disperses the aggregated heat around the LED inside the housing. The junction temperature of infrared LED checked by HDU check was $65.83^{\circ}C$, $42.02^{\circ}C$, respectively. In addition, the Thermoelement by changing the shape of the HDU was possibly designed and equipped with. Comparison with simulation and prototype measurement results, without HDU model was $65.83^{\circ}C$, $61.99^{\circ}C$, respectively. In addition to with HDU model was $42.02^{\circ}C$, $39.01^{\circ}C$, respectively. Only HDU mounted into infrared CCTV is usable in the ordinary house or outdoors. Also HDU with thermal element, fan mounted into infrared CCTV is usable in a blast furnace workplace or high temperature workplace.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.86-91
• /
• 2005

The stack, the core unit of the MCFC system, is composed of the three main parts which are the electrodes, the matrix keeping the electrolyte and the separator. Among these, the separator made of low carbon steel is manufactured by some sheet metal forming processes. The flatness of flange of the mask plate of the separator is crucial not only to enhance the stack performance but also to reduce the production cost. This study has focused on the enhancement of flatness of the mask plate flange by controlling some process parameters like the punch and die comer radii, the blank holding force, the friction coefficient and so on. The springback phenomenon occurring in the flange drawing process has been studied first using the finite element method (FEM) in order to understand what causes the springback. The distribution pattern of local longitudinal stress in the flanged part has been revealed very important in predicting the final shape of the flange. This fact has been backed up by the experimental results carried out with the developed test dies.

• 한국주조공학회지
• /
• 제41권1호
• /
• pp.11-15
• /
• 2021

주철공장의 용해 공정에 사용되는 고철 장입재는 거의 대부분 생압고철(Press Scrap)이다. 생압고철은 에너지 손실, 작업성, 안전 등 문제들을 야기할 수 있다. 생압고철 대신 파쇄고철(Shredded Scrap)을 사용함에 따라, 앞서 언급한 문제들을 해결할 수 있을 것으로 기대한다. 본 연구에서는 3t/h 중주파 유도 용해로에서 주철의 용해 시, 생압고철과 파쇄고철을 사용함에 따른 에너지 원단위(Power Basic Unit)를 비교하였다. 생압고철 대신 파쇄고철을 장입하면, 에너지 원단위가 약 15% 향상되는 것으로 확인되었다. 고철의 형상, 크기에 따른 사용 측면 특징과 제약사항을 고찰하였다.

• 만화애니메이션 연구
• /
• 통권6호
• /
• pp.34-71
• /
• 2002

Animation has been developed as a part of artistry, and maintained a correlation with other various genres such as art, film and music to bring changes in form and to seek new things. Recently, technological advancement also has supported digitalization of producing process with variety in its method. Basic unit of animation production is a frame. A set of frames which has an image of producer's intention comes to life as animation when constructed, connected and transformed. A producer usually goes through a series of trouble when deciding how to express one's intention in images. Framing in animation is a kind of visual information which reflects producer's visual perception. A producer does not simply characterize matters into geometrical figures or give circumstantial explanation, but does framing work that relies on expression. Artistic psychology based on Gestalt Theory does not concentrate on abstract artistic philosophy with conventional beauty as its center, but pursues ambiguity and coherence of formative arts to support on accepting systematic order. Therefore, the purpose of this study is to find theoretical assistance which may be fundamental part in framing of animation. First, ten elements of Rudolf Arnheim centering on Gestalt Theory shall be redefined as concepts. Based on its ground, I will attempt to analyze shape-quality of framing of conventional animation, and make an approach with my personal experimental project. From this research project, I intend to analogize systematic aspect of framing in animation and to make framing of animation possible to assist in actual production of animation.

• Wind and Structures
• /
• 제8권3호
• /
• pp.179-196
• /
• 2005

This paper describes the application of a wireless data acquisition system to monitor wind pressures and velocities with absolute pressure sensors and an anemometer. The system was developed for future deployment, as part of a research effort currently underway to instrument coastal homes in Florida to monitor roof wind pressures during hurricanes. The proposed wireless system will replace the current system that involves a large amount of hardwired connections from the sensors to the data processing unit that requires labor intensive wiring and preparation of the home. The paper describes comparison studies and field tests to assess the performance of the system. The new system offers the advantages of light hardware, ease of installation, capacity for 48 hours of continuous data acquisition, good frequency and amplitude responses, and a relatively simple maintenance. However, the tests also show that the shape of the shell that has been previously used to protect the sensors might interfere with the proper measurement of the pressures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.749-754
• /
• 1997

Nowadays domestic building market has undergone several changes. Labor costs are too high and materials are in short supply. These raised building costs and therefore lowered productivity. At this point it is the best way to reduce manual labor and find alternative materials that can improve productivity. In the building process form work take the most part of it. So many formwork systems were developed to reduce the construction period and labor cost. But their technical improvements just limited to adjust form shape-the role of form is not changed. This research developed a new formwork systems that can function to unify or minimze the unit process with cast-in-place type permanent form. In former study (reported in '97 spring seminar), we did the assembling test with column and beam clamps. Furthermore, In this paper, we examined the total systems of form erections and evaluated the structural performances.

• 한국주거학회논문집
• /
• 제4권1호
• /
• pp.5-16
• /
• 1993

This paper tries to find out the characteristics of the vernacular dwellings in Noksan area which has been a part of Kaya cultural realm. Through the analyses of its environments and several practical unit plans. The characteristic of the vernacular dwellings in thes arer are as below. The dwellings has been transfigured form [Omaksari] hut which is generally the smallest house form in Korea. The noticeable vernacular hut in this area is smallest 4-kan double-wing plan which is irregular 전 shape, but they call it single wing and 2-kan plan. Leed which can be obtained easily in thes area is used on roof and in wall. Timbers used in constrution are very slim or rather weak, but they were treated carafully. The chimney form in this area seems the results of minimizing of their being from the invasion of Japanese pirate, but also it seems an effective method of heat control. In conclusion, we cannot deny that the house form of this area seems affected by its exclusive natural and social environments.

• 한국전산유체공학회지
• /
• 제8권1호
• /
• pp.1-7
• /
• 2003

The present study has conducted the analysis of flows in a blower with double suction. The air handling system is for supplying air flows into a plant. The present system has a couple of impellers in axial direction for enhanced flow rate. Main interest lies on the improvements of static pressure rise and total efficiency of the system. The present treatment of the reform is to secure a spatial distance between the fan and the casing of the system and change the shape of the cut-off part. The resultant performance after the reform shows increased pressure-rise and efficiency of the system

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.29-37
• /
• 1996

In this study, PC controlled CNC automatic cutting system is developed. Technological introduction of the control process and the computer programming has made possible not only the automatic control for cutting processing unit but also the easy-to-use graphic software that enables the cutting process. This program involves shape part drawing and amendment, pattern reading and saving, reading Autocad file, nesting process, kerf compensation, automatic cutting path generation, NC file conversion and motor control. Software is devided into 3 modules for easy work. First step enables drawing, amendment and pattern making, followed by automatic nesting and cutting path generation with kerf compensation. In the final step, drawing data is transmitted for the resulting automatic cutting processes. This software would be applicated in gas cutting and textile cutting so that it improves the productivity of cutting process.