• 설비공학논문집
• /
• 제19권1호
• /
• pp.68-76
• /
• 2007

As an alternative approach to evaluate the unit heating load for apartment houses, we newly developed and proposed unit building method. The new method, which calculates the heating load of an apartment building as a whole, conceptually corresponds to integral analysis of building heat loss, while the existing unit apartment method to differential analysis. Four typical building models of Korean-style apartment house and two dynamic load calculation programs were selected to validate the present method under realistically imposed conditions. Eight sets of unit heating load calculated respectively by unit building and unit apartment methods showed excellent agreements regardless of building model and simulation program. It is expected that the unit building method can take the place of the unit apartment method due to fewer modeling assumptions as well as less computational efforts. Additional calculations to investigate the effects of various parameters on unit heating load yield good consistencies with known facts, and re-confirm the validity.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.849-854
• /
• 2009

Pollutant unit load (unit-load) reported by Ministry of Environment (MOE) in 1995 has been a useful method for watershed management and environmental policy decision. The unit-load has been estimated using effective rainfall ratio method. However, reliability of unit-load determined by the method has been criticized especially for paddy field and upland conditions. In this paper the unit-load of paddy field estimated by effective rainfall ratio method was compared with continuous monitoring data. Annual loads was simulated by the method choosing 5~6 storm events randomly from whole events collected. Probability distribution of difference between results by the method and measured data was investigated. The results showed that unit-load derived by the method was generally lesser than measured unit-load and showed wide variations. Therefore, unit-load estimation of paddy fields by effective rainfall ratio method need caution.

• 한국농공학회논문집
• /
• 제61권3호
• /
• pp.15-22
• /
• 2019

In order to preserve water environment, Total Maximum Daily Load(TMDL) is used to manage the total amount of pollutant from various sources, and the annual average load of source is calculated by the unit load method. Determination of the unit load requires reliable data accumulation and analysis based on a reasonable estimation method. In this study, we propose a revised unit load estimation method by analyzing the unit load calculation procedure of National Institute of Environment Research(NIER) method. Both methods were tested using observed runoff ratio and water quality data of rice paddy fields. The estimated values with the respective NIER and revised NIER methods were highly correlated each other. However, the Event Mean Concentration(EMC) and the runoff ratio considered in the NIER method appeared to be influenced by rainfall classes, and the difference in unit load increases as the runoff and EMC increase. The error can be further increased when the EMC and runoff ratio are changed according to changes in rainfall patterns by climate change and change of agricultural activities. Therefore, it is recommended to calculate unit load by applying the revised NIER method reflecting the non point pollution runoff characteristics for different rainfall classes.

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.597-604
• /
• 2011

This research analyzed the runoff patterns and estimated unit loads of selected pollutatnts using monitored data conducted for three years in a bridge area. Three estimating methods; the arithmetic average method, the regression method and the rainfall class method were used to estimate the unit load. Results of three estimating methods were compared with the unit pollutant loads from landuses in Korea and the unit pollutant loads from urban watersheds in Milwaukee, USA. Unit load using the arithmetic mean method were found to be overestimated. In terms of TSS, unit loads of two estimate were half lower than that of USA. Estimated TN and TP unit loads of three estimate were lower than that of Ministry of Environment in Korea.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.200-201
• /
• 2015

The unit modular method is one in which unit modules are prefabricated at a factory and then constructed at a construction site. That is why an important process, transporting unit module, is added in this method. The purpose of this study is to analyse the load for transporting unit module. The results of the analysis of the driving experimental runs revealed that a maximum load of 15 kN was applied on adapter block type A and a maximum load of 25 kN on adapter block type B. These loads were recorded at the points in the road test when the low-bed trailer was driving through unstable sections of the test such as stopping, restarting, passing over a speed bump or taking a left turn at speed.

• KIEE International Transactions on Power Engineering
• /
• 제5A권1호
• /
• pp.16-21
• /
• 2005

In this study, a new Unit Commitment (UC) algorithm is proposed to consider the uncertainty of a daily load profile. The proposed algorithm calculates the UC results with a lower load level than that generated by the conventional load forecast method and the greater hourly reserve allocation. In case of the worst load forecast, the deviation of the conventional UC solution can be overcome with the proposed method. The proposed method is tested with sample systems, which indicates that the new UC algorithm yields a completely feasible solution even when the worst load forecast is applied. Also, the effects of the uncertain hourly load demand are statistically analyzed, particularly by the consideration of the average over generation and the average under generation. Finally, it is shown that independent power producers participating in electricity spot-markets can establish bidding strategies by means of the statistical analysis. Therefore, it is expected that the proposed method can be used as the basic guideline for establishing bidding strategies under the deregulation power pool.

• 대한전기학회논문지
• /
• 제40권12호
• /
• pp.1195-1202
• /
• 1991

This paper describes a newly developed method of production simulation by using the Mixture of Cumulant Approximation (MOCA). In this method, the load is modelled as random variable (r.v.) which can be interpreted in terms of partitioning the load into various categories. We can consider the load shape of multi-modal characteristics. The number of load category and demarcation points of each load category are calculated automatically by using interpolation and least square method. Each generating unit of a supply system is modelled as r.v. of unit outage capacity according to the number of unit outage subset. Since the computation burden of each subset's moments increases exponentially as units are convolved to the system, we further derive the specific recursive formulae. In simulating the energy limited units, hydro unit simulation is performed using Energy Invariance Property and the simulation of pumped storage unit is modelled as compulsory and economic operations. The proposed MOCA method is applide to the test systems and the results are compared with those of cumulant and Booth Baleriaux method. It is verified that the MOCA method is considerably reliable and stable both pathological and well behaved system.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권6호
• /
• pp.334-339
• /
• 2004

In this study, a new UC (Unit Commitment) algorithm is proposed to consider the uncertainty of a daily load profile. The proposed algorithm calculates the UC results with the lower load level than the one generated by the conventional load forecast and the more hourly reserve allocation. In case of the worse load forecast, the deviation of the conventional UC solution can be overcome with the proposed method. The proposed method is tested with sample systems, which shows that the new UC algorithm yields completely feasible solution even though the worse load forecast is applied. Also, the effects of the uncertain hourly load demand are statistically analyzed especially by the consideration of the average over generation and the average under generation. Finally, it is shown that independent power producers participating in electricity spot-markets can establish bidding strategies by means of the statistical analysis. Therefore, it is expected that the proposed method can be used as the basic guideline for establishing bidding strategies under the deregulation power pool.

• 전기전자학회논문지
• /
• 제19권3호
• /
• pp.455-459
• /
• 2015

본 논문은 그래픽 처리 뿐 만 아니라 범용 연산의 가속화를 지원하기 위한 SIMT 구조 GP-GPU의 Dispatch Unit과 Operand Selection Unit을 제안한다. Warp Scheduler로부터 발행된 명령어에서 사용되는 Operand의 모든 정보를 Decoding 하면 불필요한 Operand Load가 발생하여 레지스터 부하가 발생 한다. 이러한 문제점을 해결하기 위해 Pre-decoding방법을 사용하여 Operand의 정보만을 먼저 Decoding 하여 Operand Load를 줄이고, 레지스터의 부하를 줄일 수 있는 방법을 제안한다. 제안하는 Dispatch Unit에서 나온 Operand 정보들을 레지스터 뱅크 충돌을 방지하는 방법을 적용한 Operand Selection Unit에 전달해 전체적인 처리 성능을 향상 시켰다. Modelsim 10.0b를 이용하여 Warp Scheduler로부터 발행된 10,000개의 임의의 명령어를 처리하여 소요되는 총 Clock Cycle을 측정하였다. 본 논문에서 제안한 Pre-Decoding 기능을 탑재한 Dispatch Unit과 Operand Selection Unit을 적용하여 기존의 방법들 보다 각각 약 11%, 24%의 처리 효율이 증가한 것을 확인 할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.713-716
• /
• 2001

본 연구에서는 전력계통의 경제적인 운용의 일환으로 DLC와 기동정지계획을 연계하여, DLC에 의해 조절되는 부하에 대응할 수 있는 기동정지계획을 수립할 수 있도록 하였다. 이의 방법으로, 동적계획법에서의 State를 DLC에 의해 변화하는 부하에 대응할 수 있도록 화장하는 3차원 동적계획법을 구성함으로써 DLC와의 연계를 가능토록 한 것이다.