• Journal of Korean Library and Information Science Society
• /
• v.48 no.2
• /
• pp.121-158
• /
• 2017

The purpose of this study was to propose the developmental direction for small libraries based on a set of various situational analysis of small libraries in Seoul. By analyzing the operational status of the autonomous regions of different operating methods, we also pursued qualitative enhancement of small libraries by autonomous district by proposing optimized operation methods. As a consequence of the study, it was analyzed that the public and private libraries need to be distinguished in consideration of the characteristics of operation according to the operating entity rather than uniform budget support and guidance management. That is, the small libraries scattered throughout Seoul were founded by the principal of their establishment for the purpose of providing knowledge information and reading culture service within the public activity area. Therefore, if Seoul intervenes and manages under the current situation, where the libraries are operating independently in accordance with the purpose of establishment, regardless of whether they meet the user requirements or not in terms of quality or quantity, various problems may be caused. In this background, it seems appropriate to restrict the library management in line with relevant regulations.

• Resources Recycling
• /
• v.27 no.5
• /
• pp.38-48
• /
• 2018

Deep cement mixing method (DCM) is used to improve the quality of various ground type and its technical development proceeding based on performance improvements of solidification materials and mixing techniques with ground soil. In this study, it was possible to improve silty clay ground soil had 1 to 3 MPa compressive strength using solidification material that composed mainly circulating fluidized bed combustion (CFBC) power plant fly ash and reduce standard deviation of strengths from over 1.0 MPa to 0.322 MPa using improved auger bits in field test to forming more uniform bulbs than in case of using existing auger bit.

• 보존과학연구
• /
• s.21
• /
• pp.77-99
• /
• 2000

Tumuli located in Chodang-dong in Kangreung City are sitesexcavated by the Museum of Kangreung University in 1993.Ofthese sites, a gilt bronze crown and gilt bronze sword with ring pommel with a tri-leaf ornament were excavated from the B-16tumulus. Underneath the gilt bronze crown was the gilt bronzes word with ring pommel with tri-leaf ornament, and these artifacts were treated with Polyurethane foams on the spot followed by special measures for conservation. This manuscript describes measures for conservation andanalysis with regard to the gilt bronze crown, gilt bronze sword with ring pommel with tri-leaf ornament and gilt bronze beltornaments. Bronze on the gilt bronze crown was completely corroded, therefore it was consolidated together with soil in the back of the artifact with Paraloid B72 after cleaning. Polyurethanefoams bottom was finished by applying the mixture of Epoxy resinAW106 and HV935K with soil. On the sword with ring pommel, the wooden part of the hilt was coated with Paraloid B72 (in Xylene) and the blade was consolidated with Paraloid NAD-10 30% after desalting with Sodium sesquicarbonate method. The gilt bronzebelt ornaments were treated with 3% Benzotriazole, coated with Paraloid B72 and then joined by using Cyanlacrylate. Specimens for the gilt bronze crown and gilt bronze belt ornaments were produced and gilding layers were examined under a metallographic microscope. The gilt bronze crown and the gilt bronze belt ornament maintained relatively good gilding quality with uniform gilding layers. Analysis of wood for the sheath of the sword with ring pommel revealed it to be Juglans mandshurica. Further more, analysis of constituents for a blue colored grassbead from dissolution of Polyurethane foams found it to be from the $Na_2O$-CaO-$AI_2O_3$-$SiO_2$ family.

• Journal of Arbitration Studies
• /
• v.26 no.1
• /
• pp.107-134
• /
• 2016

International arbitration is the important field of applying CISG and the backbone of uniform law developed by CISG. Now CIETAC tribunals like courts of contracting states apply CISG precisely, which is beneficial to improving the quality and the credit of arbitral cases. Arbitration has the characters of independence and the non-government. the legal foundation of arbitral tribunal's applying CISG are the national arbitral law, the applicable arbitral procedures and usages of arbitration, not for performing international obligations under the CISG. CIETAC mainly use China Contract Law and CISG over the cases of sale of goods. Because of no provisions on recovery of differential price loss (equal to article 75 and 76 of CISG) Chinese tribunals have more discretion in determining the sum of damages under the China Contract Law. Applying China Contract Law may not beneficial to aggrieved party.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.99-105
• /
• 2011

In this paper, we proposed a method for estimating an accurate gamut based on segment maxima method. According to the number of segments in the segment maxima, a local concavity is generated in the vicinity of lightness axis or a gamut is reduced in high chroma region. It induces artifacts or deterioration of the image quality. To remove these artifacts, the number of segment is determined according to the number of samples. and a local concavity is modified by extending a detected concave point to the line connecting two adjacent boundary points. Experimental results show that the contours in a uniform color region and speckle artifacts from the conventional segment maxima algorithm are removed.

• Korean Journal of Materials Research
• /
• v.13 no.5
• /
• pp.333-337
• /
• 2003

We report a new fabrication process for carbon nanotube field emitters with high performance. The key of the fabrication process is trim-and-leveling the carbon nanotubes grown in trench structures by employing a planarization process, which leads to a uniform distance from the carbon nanotube tip to the electrode. In order to enable this processing, spin-on-glass liquid is applied over the CNTs grown in trench to have them stubborn adhesion among themselves as well as to the substrate. Thus fabricated emitters reveal an extremely stable emission and aging characteristics with a large current density of 40 ㎃/$\textrm{cm}^2$ at 4.5 V/$\mu\textrm{m}$. The field enhancement factor calculated from the F-N plot is $1.83${\times}$10^{5}$ $cm^{－1}$ , which is a very high value and indicates a superior quality of the emitter originating from the nature of open-tip and high stability of the carbon nanotubes obtained new process.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.3
• /
• pp.40-48
• /
• 2013

Cryoablation device is a surgical instrument to produce the cooling effect to destroy detrimental biological tissue by utilizing low temperature around 110 K. Usually, this device has the concentrated cooling region, so that it is suitable for concentrated and thick target. Accordingly, it is hard to apply this device for the target which is distributed and thin target. In this study, the design procedure of a closed-loop cryoablation device with multiple J-T expansion part is developed for the treatment of incompetent of great saphenous vein. The developed cyoablation device is designed with the analysis of 1-dimensional (1-D) bio-heat equation. The energy balance is considered to determine the minimum mass flow rate of refrigerant for consecutive flow boiling to develop the uniform cooling temperature. Azeotropic mixed refrigerant R410A and zeotropic mixed refrigerant (MR) of R22 ($CHClF_2$) and R23 ($CHF_3$) are utilized as operating fluids of the developed cryoablation device to form the sufficient temperature and to verify the quality of the inside of cryoablation probe. The experimental results of R410A and the zeotropic MR show the temperature non-uniformity over the range are $244.8K{\pm}2.7K$ and $239.8K{\pm}4.7K$ respectively. The experimental results demonstrate that the probe experiences the consecutive flow boiling over the target range of 200 mm.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.2
• /
• pp.93-102
• /
• 2003

With respect to this research, the College of Arts and Design, Kon Kuk University founded Design Venture of KKU(Kon Kuk University) in July 2001 as an approach to tackle the issue on how to accept and respond to the waves of changes in paradigms of the 21st century represented by information revolution. Such move is to cope more effectively with the changes in the current educational environment with an aim to secure the competitive edges compatible with the conditions of each college under the uniform and standardized educational systems. Even the professionals in the design fields of this country try to find the significance in bringing out in the open the latent creative talents of the students by improving the quality of our daily necessities and putting the students through more practical training, and in creating international competitiveness of our design field by encouraging the students to gain more diverse experiences. Therefore, the purpose of this research is to present the approaches to revitalize Design Venture of Kon Kuk University which has been managed as part of the efforts to establish the new identity for the design of this country in the 21st century, and to present the new model for an enterprise which, rooted in the College, can grow into a high value-added business. The methodology for this research is based on the case study of Design Venture of Kon Kuk University and investigation into the literature. The contents of this research include the following three steps. Firstly, initial research is made into the background for founding the College of Arts and Design which had been promoted as a differentiated strategy for the long-term and short-term development plan of the College of Arts and Design, in Chungju Campus of Kon Kuk University. Secondly, the basic strategy for Vonchi, brand of Design Venture of KKU and the brand launching process are examined. Thirdly, Various approaches to revitalize the Vonchi brand recognition are collected and analyzed to present the conclusion and the alternative. Such research findings as given above on Design Venture of KKU may satisfy diverse consumer-oriented requirements on the strength of the characterization and differentiation of the college and may enhance the competitive edge of the college.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.5-18
• /
• 1996

The solid state cesium ion source os alumino-silicate based zeolite which contains cerium. The material is an ionic conductor. Cesiums are stably stored in the material and one can extract the cesiums by applying electric field across the electrolyte. Cesium ion bombardment has the unique property of producing high negative ion yield. This ion source is used as the primary source for the production of a negative ion without any gas discharge or the need for a carrier gas. The deposition of materials as an ionic species in the energy range of 1.0 to 300eV is recently recognized as a very promising new thin film technique. This energetic non-thermal equilibrium deposition process produces films by “Kinetic Bonding / Energetic Condensation" mechansim not governed by the common place thermo-mechanical reaction. Under these highly non-equilibrium conditions meta-stable materials are realized and the negative ion is considered to be an optimum paeticle or tool for the purpose. This process differs fundamentally from the conventional ion beam assisted deposition (IBAD) technique such that the ion beam energy transfer to the deposition process is directly coupled the process. Since cesium ion beam sputter deposition process is forming materials with high kinetic energy of metal ion beams, the process provider following unique advantages:(1) to synthesize non thermal-equilibrium materials, (2) to form materials at lower processing temperature than used for conventional chemical of physical vapor deposition, (3) to deposit very uniform, dense, and good adhesive films (4) to make higher doposition rate, (5) to control the ion flux and ion energy independently. Solid state cesium ion beam sputter deposition system has been developed. This source is capable of producing variety of metal ion beams such as C, Si, W, Ta, Mo, Al, Au, Ag, Cr etc. Using this deposition system, several researches have been performed. (1) To produce superior quality amorphous diamond films (2) to produce carbon nitirde hard coatings(Carbon nitride is a new material whose hardness is comparable to the diamond and also has a very high thermal stability.) (3) to produce cesiated amorphous diamond thin film coated Si surface exhibiting negative electron affinity characteristics. In this presentation, the principles of solid state cesium ion beam sputter deposition and several applications of negative metal ion source will be introduced.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.579-585
• /
• 2016

3D laser scanning can be used for scanning the freeform surface and building a model from which the measurements could be taken, in order to solve the difficulty with getting access to the exact freeform shape and position data of the complex building envelope. The shape making process using 3D scanning is as follows: point cloud, mesh surface segmentation, NURBS(Non-Uniform Rational B-spline) surface generation, and parametric solid model generation. In this research, we review previous studies, reverse engineering notion, importance of reverse engineering usage for freeform envelope, and previous cases in order to identify the detail reverse engineering process for prefabrication and construction of freeform panels using 3D laser scanning technology. Therefore, the purpose of this research is to present a basic information which should be considered during design and construction phase and improve quality and constructibility of freeform building by analyzing the reverse engineering process and case study for prefabrication and construction of freeform panels using 3D laser scanning. The research results will enable 3D shape engineering and design parameterization using reverse engineering to be used in various construction projects.