• Journal of information and communication convergence engineering
• /
• 제8권3호
• /
• pp.245-250
• /
• 2010

To support various bandwidth requirements for many kinds of devices such as PC, notebook, PDA, cellular phone, a transcoding proxy is usually necessary to provide not only adapting multimedia streams to the client by transcoding, but also caching them for later use. Due to huge size of streaming media, we proposed the 3 kinds of segmentation - PT-2, uniform, bitrate-based segmentation. And to reduce the CPU cost of transcoding video, we proposed the DQS service policy. In this paper, we simulate the combined our previous two researches that are bitrate-based segmentation and DQS(Degraded Quality Service) policy. Experimental results show that the combined policy outperforms companion schemes in terms of the byte-hit ratios and delay saving ratios.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.118.3-118
• /
• 2001

CLED (Contact Light Emitting Device) has three layers consisting of a transparent electrode, a light emitting layer and a substrate. When the substrate of the CLED comes in contact with a fingerprint under AC input voltage, it makes an electric field between the fingerprint and the device. Due to the electric field, the light is emitted along the ridgeline of the fingerprint. The intensity along the ridge on the surface of the CLED increase in proportion to the electric field. To achieve uniform performance of fingerprint verification devices, inspection system of CLED for quality control were required. In this research, we proposed the factors for quality controls such as dimensions of the CLED, uniformity ...

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.21-24
• /
• 2012

In the iron ore sinter process, temperature distribution pattern in sintering bed is related with productivity and quality of sintered ore. Evenly heat distribution make the uniform quality of sintered ore but in normal operating condition, upper part of bed has lack of heat and scarce quality of sintered ore, thus yeild rate is decreased and productivity is diminished. Therefore, using the additional fuel in the upper part of bed is considered and effect of fuel is discussed. (max. 80 words).

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.1-8
• /
• 2004

Applications of the deep hole drilling process can be found in many industries ranging from large aerospace manufacturer to small tool and die shop. Deep hole drilling process with small diameter generally requires high quality and accuracy. But problems which may arise or result from the deep hole drilling process include drill breakage, the generation of a finished part surface which does not satisfy required quality, and process instability. To guaranty the required machining quality and accuracy, it is important to understand and improve the deep hole drilling process. In this study, deep hole drilling experiments using tingle edge drill with small diameter under 2mm have been carried out for difficult to cut materials such as C42CrMo4 and C45pb and the experimental results were analyzed. Feed force and torque versus feed showed linear relationship in both materials. The feed force and torque are decreased as cutting speed is increased but the trends are not uniform in C42CrMo4.

• 동아시아식생활학회지
• /
• 제14권4호
• /
• pp.379-386
• /
• 2004

Jeung-Pyun is a traditional Korean fermented rice cake leavened by yeast. To develop a functional Jeung-Pyun, mulberry leaf(ML) were added to the rice at the levels of 0, 2, 4, 6, 8%, respectively. Physicochemical, sensory, texture and surface characteristics of Jeung-Pyun were examined. The specific volumes of all the Jeung-Pyun's with ML were significantly lower than that of control(0% ML) and 4% ML sample showed the highest volume among them. The pH of ML Jeung-Pyun batters decreased with fermentation time. Overall quality of Jeung-Pyun with ML obtained lower value than the control. Among the texture properties measured with rheometer, hardness, cohesiveness, gumminess and brittleness of ML Jeung-Pyun decreased according to the amount ML added and springiness was not significantly different. The surface structure by SEM showed that Jeung-Pyun added with 4% ML had the largest and the most uniform air cells. In conclusion, the most acceptable concentrations of ML on the basis of overall quality in sensory evaluation and physicochemical characteristics were 2% or 4%.

• 한국전기전자재료학회논문지
• /
• 제13권2호
• /
• pp.125-130
• /
• 2000

Two step growth of reduced pressure chemical vapor eposition has been successfully developed to achieve in-situ phosphorus-doped silicon epilayers, and the characteristic evolution on their microstructures has been investigated using scanning electron microscopy, transmission electron microscopy, and secondary ion mass spectroscopy. The two step growth, which employs heavily in-situ P doped silicon buffer layer grown at low temperature, proposes crucial advantages in manipulating crystal structures of in-situ phosphorus doped silicon. In particular, our experimental results showed that with annealing of the heavily P doped silicon buffer layers, high-quality epitaxial silicon layers grew on it. the heavily doped phosphorus in buffer layers introduces into native oxide and plays an important role in promoting the dispersion of native oxides. Furthermore, the phosphorus doping concentration remains uniform depth distribution in high quality single crystalline Si films obtained by the two step growth.

• 통합자연과학논문집
• /
• 제6권4호
• /
• pp.211-214
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that HF treatment is not desirable for the synthesis of a high quality PEDOT thin film via vapor phase polymerization method. Rather, sole treatment with plasma noticeably improved the quality of APS-SAM on glass surface. As a result, a highly dense and smooth PEDOT thin film was grown on uniform oxidant film-coated APS monolayer surface.

• 한국산학기술학회논문지
• /
• 제21권7호
• /
• pp.577-582
• /
• 2020

발전소에서 생산된 전기는 여러 단계의 변전과정을 거쳐 소비자에게 전달된다. 이 때 각 소비자에게 적합한 전압으로 송전하기 위해 초기 송전단계 및 산업단지 및 공장과 같은 고전압이 필요한 경우에 사용되는 초고압변압기는 권선 단부에서 고압의 불평등 전계가 형성되어 절연파괴의 위험을 내재하고 있다. 초고압변압기는 전압의 승압과 강압을 위해 권선, 철심이 가장 중요한 부품이다. 특히 권선의 경우 전압이 직접 인가되면서 전압의 크기를 변환하는데 핵심적인 역할을 한다. 이때 권선 단부는 그 형상에 의해 불평등 전계가 형성되고 특히 권선의 모서리에 높은 전계 스트레스가 발생한다. 이러한 불평등 전계에 의한 권선 단부의 전기적 응력을 분산하기 위하여 정전링을 사용하는데 이 정전링은 권선 상·하단 단부에 설치된다. 이러한 정전링을 설계하기 위해서는 다양한 변수를 고려하여야 하지만 그 중 정전링 곡률, 정전링 표면의 절연지 두께, 권선과 권선사이에 설치되는 배리어 수, 배리어 두께가 정전링에 발생되는 전계 스트레스에 어떠한 영향을 미치는지 유한요소법(Finite Element Method)을 통해 확인하였고 그 결과를 통해 정전링 설계 시 고려해야 할 사항을 제안하였다.

• 한국광물학회지
• /
• 제28권1호
• /
• pp.9-16
• /
• 2015

통영산 해수양식진주를 광택과 모양에 따라 광택이 좋고 둥근(LR; Luster Round) 진주, 광택이 나쁘고 둥근(LLR; LackLuster Round) 진주, 바로크(LLB; LackLuster Baroque) 진주, 이핵(LTN Lackluster Two Nucleus) 진주로 세분하여 비중 측정, 현미경관찰, X선 회절분석, 주사전자현미경관찰 등을 통해 진주의 광택에 영향을 미치는 요인에 대한 광물학적 연구를 수행하였다. 광택이 좋은 진주는 광택이 나쁜 진주에 비해 비중이 약간 낮았지만 모두 상업적인 진주의 비중 내에 포함된다. 진주층 단면의 두께는 광택이 좋고 둥근 진주는 0.3 mm 정도로 균질한 반면, 광택이 나쁘고 둥근 진주는 각각의 진주층 두께는 균일하나 광택이 좋고 둥근 진주에 비해 두께가 얇다. 이핵 진주와 바로크 진주는 한 진주 내에서도 진주층 두께 편차가 상당히 큰 경향을 보였다. 진주의 표면은 광택이 좋은 진주가 광택이 나쁜 진주에 비해 아라고나이트 결정의 성장선이 좁고 선명하다. 광택이 좋은 진주는 광택이 좋지 않은 진주보다 아라고나이트 결정층의 결함이 적으며 배열이 평행하며 두께가 더 얇고, 표면과 내부에서 두께 차이가 작다. 능주층이 있는 경우 능주층과 진주층에서 아라고나이트 이외에 방해석이 포함되며, 광택이 나쁜 경우 방해석 함량이 매우 높다. 능주층이 없는 진주에서는 광택 여부에 상관없이 방해석이 없고 모두 아라고나이트로 구성되어 있다.

• 한국지역사회생활과학회지
• /
• 제24권2호
• /
• pp.251-258
• /
• 2013

Korean oil and honey Yukwa has been paid attention as formal cake for traditional national seasons' holiday and religious service. Quality of Yukwa, however, has been maintained arbitrarily by each Yukwa manufacturer. Since even same Yukwa had severe differences in size, weight, and pattern, it has given the negative effect to the consumer. Yukwa industries need to setup the quantitative quality specifications instead of qualitative ones to maintain the uniformity of Yukwa quality. Efficient and economical inspection and process control system should be developed. In developing quality standards of Yukwa, features which can measure quality quantitatively in real time should be properly chosen. Existing quality features such as acidity, oxidization, hardness, viscosity, and texture were measured by the chemical or physical base destructive methods. Many research and developments have been performed in investigating and analyzing chemical transition states of those quality features as environment or storage condition changes. Most methods, however, require either off-line or complex treatment or time consuming process of analysis in evaluating quality features. Consumer, however, selects products mostly based on the external features such as shape, size, and color. Therefore, critical visual quality features should be chosen and the efficient real time measurement system must be developed. In this paper, computer image acquisition and processing system were developed and software modules were developed to extract the quantitative data of those features in real-time. Computer image processing system will promote in maintaining uniform quality of Yukwa and establishing quality standards of Yukwa.