• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.1013-1022
• /
• 2006

Although the cable-stayed bridges with two I-type girders inherently do not have good aerodynamic characteristics, a lot of the bridges with this type girders are constructed in Korea recently because of an economical merit. This paper investigated the aerodynamic characteristics of the cable-stayed bridges with two I-type girders. Section model tests were conducted in order to investigate the aerodynamic behaviors of this section with varying of the angles of attack, turbulence intensity and damping ratios. Two deck section configurations with different torsional stiffness were studied under construction and after completion respectively. Three types of the fairings were investigated to improve the aerodynamic characteristics of the bridges. The result of this study showed that the traditional section model test in uniform flow estimates the aerodynamic behavior rather pessimistically. The wind induced responses of the bridges were severely varied in accordance with the turbulence intensity and the structural damping ratio. The proposed fairing reduced the magnitude of the vortex-shedding vibrations and buffeting responses. It also increased the wind speed at which flutter occurs. It is expected that these investigations would provide a lot of information for the design of the cable stayed bridges with two I-type girders regarding wind resistance.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.3
• /
• pp.88-96
• /
• 2024

Lithium metal has garnered attention as a promising anode active material thanks to its high specific capacity, energy density, and the lowest reduction potential. However, the formation of dendrites, dendritic crystals that arise during the charge and discharge process, has posed safety and lifetime stability challenges. To resolve this, our study has introduced a novel separator design. This separator features a composite coating of vapor-grown carbon fiber, a conductive material in nanofibers, and silver. We have meticulously studied the impact of this innovative separator on the electrochemical properties of the lithium metal anode, unveiling promising results. To confirm the synergistic effect of VGCF and Ag, a separator with no surface treatment and a separator with only VGCF coated on one side were prepared and compared with the Ag-VGCF-separator. In the case of the bare separator, the Li metal surface is covered with dendrites during the initial charge and discharge process. In contrast, both the VGCF-separator and the Ag-VGCF-separator show Li precipitation inside the conductive coating layer coated on the separator surface. Additionally, the Ag-VGCF-separator showed a more uniform precipitate shape than the VGCF-separator. As a result, the Ag-VGCF-separators show improved electrochemical properties compared to the bare separators and the VGCF-separators.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.250-257
• /
• 2015

Multi-leaf collimator (MLC) systems are frequently used to deliver photon-based radiation, and allow conformal shaping of treatment beams. Many proton beam centers currently make use of aperture and snout systems, which involve use of a snout to shape and focus the proton beam, a brass aperture to modify field shape, and an acrylic compensator to modulate depth. However, it needs a lot of time and cost of preparing treatment, therefore, we developed the manual MLC for solving this problem. This study was carried out with the intent of designing an MLC system as an alternative to an aperture block system. Radio-activation and dose due to primary proton beam leakage and the presence of secondary neutrons were taken into account during these iterations. Analytical calculations were used to study the effects of leaf material on activation. We have fabricated tray model for adoption with a wobbling snout ($30{\times}40cm^2$) system which used uniform scanning beam. We designed the manual MLC and tray and can reduce the cost and time for treatment. After leakage test of new tray, we upgrade the tray with brass and made the safety tool. First, we have tested the radio-activation with usually brass and new brass for new manual MLC. It shows similar behavior and decay trend. In addition, we have measured the leakage test of a gantry with new tray and MLC tray, while we exposed the high energy with full modulation process on film dosimetry. The radiation leakage is less than 1%. From these results, we have developed the design of the tray and upgrade for safety. Through the radio-activation behavior, we figure out the proton beam leakage level of safety, where there detects the secondary particle, including neutron. After developing new design of the tray, it will be able to reduce the time and cost of proton treatment. Finally, we have applied in clinic test with original brass aperture and manual MLC and calculated the gamma index, 99.74% between them.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.273-285
• /
• 2009

Statement of problem: The aim of dental research is to advance scientific knowledge and leads to improvement in the treatment and prevention of dental disease. Utilizing an effective research design and adequate statistical methods are essential procedures ensuring that the results of researches are based on evidences. A research should utilize proper statistical methods without statistical errors; Otherwise, it could adversely affect clinical practice and future research. Purpose: This study was made to investigate the statistical methods used in the Journal of Korean Academy of Prosthodontics (JKAP) and then to assess them for the statistical errors. Material and methods: Among the total of 399 articles in the JKAP published from 2000 to 2006, 292 articles using statistics were reviewed. The validity of the statistical methods used in them were assessed using a checklist based on the guideline for statistical reporting in the uniform requirements for manuscripts submitted to biomedical journals by International Committee of Medical Journal Editors. The checklist consisted of three categories of statistical errors: 1) Unspecified computer statistical packages, 2) Inadequate description of statistical methods, 3) Misuse of statistical terms. Then, the results were compared between the Korean version and the English version in the JKAP. Results: Among the 212 articles using statistics in the Korean version, 115 articles (54%) and among the 80 articles using statistics in the English version, 47 articles (59%) were shown to have unspecified computer statistical packages without statistically significant difference (P = .66). Likewise, 101 articles (48%) in the Korean version and 25 articles (31%) in the English version were shown to have the inadequate description of statistical methods without statistically significant difference (P = .09). However, 114 articles (54%) in the Korean version and 19 articles (24%) in the English version were shown to have the misuse of statistical terms with statistically significant difference (P = .01). Conclusion: Some of the articles in the JKAP had inadequate statistical validity, given the statistical errors identified in this assessment. Hence, dental researchers should be more careful when it comes to describing and applying statistical methods.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.175-184
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Chinese and the Japanese. Material and methods: Initial design of the adjustable dental trays was developed from the results of the dental arch size of Korean adults. This design was applied to the CAD-CAM process in order to create tray model samples. Simple silicon-base molds were then replicated based on these sample models. Polyurethane injection into the silicon- base molds completed the process of creating a large number of test products. 60 Chinese dental students (male:30, female:30) from the Shanghai Second Medical University and 60 Japanese alumni from the Kumamoto high school (male:30, female:30) were selected for taking irreversible hydrocolloid impression with these trays. The width and length of the impression body were measured on several measuring points by Vernier caliper. The results were analyzed statistically to evaluate the fitness of the trays. Results: 1. Uniform impression material thickness was achieved on the Chinese and Japanese by controlling the width of the tray using stops and beveled guides. The material thickness was generally within the range of 3 mm to 6 mm. 2. In the maxillary tray of the Chinese, average thickness of the impression material of the labial vestibule of the incisal teeth was 6.2 mm, the canine was 5.9 mm and the midpalatal part 10.5 mm and the posterior palatal part 9.7 mm. These were relatively large values. 3. In the mandibular tray of the Chinese, average length of the impression material of the lingual vestibule of first, second premolar contact point was 8.9 mm, the incisal teeth was 7.8 mm and thickness of the labial part of canine was 6.8 mm and premolars 7.0 mm. These were relatively large values. 4. In the maxillary tray of the Japanese, average thickness of the impression material of the labial vestibule of the incisal teeth was 7.4 mm, the canine was 7.7 mm and the midpalatal part 9.1 mm. These were relatively large values. 5. In the mandibular tray of the Japanese, average thickness of the impression material of the labial vestibule of first, second premolar contact point was 8.4 mm, and thickness of the labial part of canine was 7.4 mm. These were relatively large values. Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Chinese and Japanese, we can take more easy and accurate dental impressions.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.115-130
• /
• 2013

In this study, lateral-torsional buckling (LTB) strength of high-strength H-beams built up from 800MPa tensile-strength steel was experimentally and analytically evaluated according to current lateral stability provisions (KBC 2009, AISC-LRFD 2010). The motivation was to evaluate whether or not current LTB provisions, which were originally developed for ordinary steel with different stress-strain characteristics, are still applicable to high-strength steel. Two sets of compact-section specimens with relatively low (Set A) or high (Set B) warping stiffness were prepared and tested under uniform moment loading. Laterally unbraced lengths of the test specimens were controlled such that inelastic LTB could be induced. All specimens exhibited LTB strength exceeding the minimum limit required by current provisions by a sufficient margin. Moreover, some specimen in Set A reached a rotation capacity required for plastic design, although its laterally unbraced length belonged to the inelastic LTB range. All the test results indicated that extrapolation of current provisions to high-strength steel is conservative. In order to further analyze the test results, the relationship between inelastic moment and laterally unbraced length was also derived in explicit form for both ordinary- and high-strength steel based on the effective tangent modulus of inelastic section. The analytical relationship derived again showed that extrapolation of current laterally unbraced length limit leads to a conservative design in the case of high-strength steel and that the laterally unbraced length to control the inelastic LTB behavior of high-strength steel beam should be specified by including its unique post-yield strain-hardening characteristics.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.142-160
• /
• 2023

The position of the people who participated in the Bapyo Ritual held in the reign of King Sejong and the corresponding costumes were examined. The king, who was the executive body of the ritual, wore Myeon-Bok, a court dress, and Myeon-Bok was Gujang-Bok made of Jang-wha on Guryu-Pyeongcheongwan. Crown princes, royal families, and government officials wore Oryang-Gwan and Jekraeui, which were Jobok. The crown princes' Joboks were changed from Oryang-Gwan to Wukryang-Gwan in the dynasty year 10 of King Sejong, and in the year of King Munjong's accession, Myeon-Bok was received, and after King Danjong, the crown princes wore Palryu-Pyeongcheongwan and Chiljang-Bok. Diplomats and Jongsagwan who were the envoys wore Sangbok. A Sangbok worn by the diplomat was Samo with Danryeong, Seo-Dae, and Hyeopgeum-Hwa, and a Sangbok worn by Jongsagwan was Samo, Danryeong, Heukgak-Dae, and Heukpi-Hwa. Byulgam, who served as an attendant to the king in the king's close quarters, wore Gongbok and Sangbok. Gongbok consisted of Ja-Geon, Danryeong and Heukpi-Hwa, and Sangbok consisted of orange color Cho-Rip, Jikryeong, Joa, and Heukpi-Hwa. The person holding San, Gae , Sujeongjang, and Geumwolbu wore Ja-Geon and Cheong-Ui, and Seon wore Pimoja and Hong-Ui. Siwigun wore armor and helmets equipped with weapons. Among court musicians, Aksa's costumes consisted of Bokdu, Bigongbok, Geumdonghyeokdae, Bibaekdaedae, and Opiri, and Aksaeng's one composed of Gaechaek, Bisuransam, Hyupgo, Mal, Maldae, and Opiri. As a result of the above, the process of ceremonial clothes becoming uniform clothes in the reign of King Sejong was confirmed. The king and lower-ranking officials such as crown princes, government officials, diplomats, Byulgam, armies for ceremonial weaponry, and court musicians participating in the Bapyo Ritual wore the highest grade of ceremonial clothes for each class. King Sejong had repeated discussions to build a nation based on Confucianism, and arranged each rite and corresponding costume, and the Bapyo Ritual costume was also systematically prepared for each position. The ceremonial clothing organized during the reign of King Sejong was regulated in Yejon and became the basis for continuing to the late Joseon Dynasty.

• The Korean Journal of Health Service Management
• /
• v.2 no.1
• /
• pp.137-154
• /
• 2008

The increase of the supply of medical service and the increase of hospitals have intensified the competition of hospitals, and the advancement towards internationalization in the opening of medical industry has triggered the infinite competition of medical profession. In addition, the high expectation of customers and quality improvement in the medical care in accordance with the improvement of overall income, and the change of active role of medical consumers according to the popularization and the improvement of rights awareness reflect the customer needs and choice in the medical service. Customers wanted to receive the kind and pleasant service under the up-to-date medical service. Therefore, as a solution, hospital coordinators were emerged for the purpose of smooth treatment and customer satisfaction by generalizing all service of hospital. Accordingly, this thesis attempted to investigate the effect of hospital coordinator education curriculum on the education satisfaction and the quality of medical service. In order to solve the purpose of this study, I, author reviewed the existing literatures, established hypothesis, and verified hypothesis by using the variety of statistics techniques such as reliability, validity, frequency analysis, and regression analysis. The verification of hypothesis is as followings: First, among education training factors of hospital coordinators, the quality of instructor significantly affects the satisfaction of hospital coordinator education training. Second, among training factors of hospital coordinator, the attitude of trainee significantly affects the training satisfaction of hospital coordinator. Third, among education training factors of hospital coordinator, education course significantly affects the training satisfaction of hospital coordinator education. As the qualities of instructor are better equipped, the satisfaction of education becomes higher. It indicates that the education method of instructors is important as an index to represent the qualities of instructor such as the appropriateness of education method, preparation, passion, visual materials, the adequacy of education procession, and specialized knowledge, and it has important effect on the satisfaction of education. In order to enhance the satisfaction of hospital coordinator education, the creation of education environment, making trainee concentrate on the education, is required by appropriately allocating programs, arousing interest in education, based on the attitude of trainee, discussion, and preliminary programs, preparation, ahead of enforcement of education. Fourth, the satisfaction of hospital coordinator education training significantly affects the reliability among the qualities of medical service. Fifth, satisfaction of hospital coordinator education training significantly affects hospitality I kindness among the qualities of medical service. If the education satisfaction of trainee is high, it is effective in the practical application such as dealing with complaints, the duty performance for the patients, and so on in offering the medical service, related to reliability and furthermore, we can find the positive change in the attitude change of medical professions related to the reliability of hospital coordinator. In addition, in the process of offering medical services such as the kind explanation on the duty, rapid response to the customers inquiry, and tidy uniform, practical effect was verified. Sixth, the education training factor of hospital coordinator significantly affects the reliability among the quality of medical service. Seventh, the education training factors of hospital coordinator significantly affect hospitality/kindness. In the education of hospital coordinator, the methods to attract the interest of trainee by emphasizing reliability should be sought and for gaining the practical effect of hospital coordinator education, the sufficient preparation and investigation on the education curriculum should be prerequisite and under this condition, intensified discussion on the instructor and education course is needed. In the design of education course, more education hours and subjects should be allocated in the part of hospitality in order to improve the practical application of hospitality. Therefore, it is meaningful in a sense that this study newly approached the components of hospital coordinator education and the need to modify the quality components of medical service in accordance with the study subjects was raised. This study also finds its meaning in that it provides basic materials for the study of future hospital coordinator education by suggesting the system development model of hospital coordinator education through preliminary study of education training. In addition, this study is meaningful in the aspect that it suggested the direction of education training by showing how the hospital coordinator education training would applied to the hospital coordinator course of the Continuing Education Center at Pusan and Kyungnam National University to some extent. Since all investigation of this study was approached from the side of hospital coordinator, the thoughts of patients who are beneficiaries of medical service, and care givers cannot be identified. Therefore, the satisfaction of patients and care givers through the experience of medical service, which is the essential prerequisite of medical service, should be importantly considered and investigated. Accordingly, The study of comparing and analyzing the views of both patients and care givers should be carried out in the future.

• The Journal of Art Theory & Practice
• /
• no.9
• /
• pp.171-193
• /
• 2010

This paper examines Fernand Khnopff's Symbolism, focusing on the I Lock My Door upon Myself as a manifesto of his artistic credo in style and theme. Its title was originally in English, originating from the poem "Who Shall Deliver Me?" by Dante Gabriel Rossetti's sister Christina Rossetti. I use the term "Social Symbolism" which combines a nationalist perspective with traditional French Symbolism, in order to explain how the image of Bruges is represented in his oeuvre. Symbolism calls for psychological introspection evoking death, love, silence, and solitude and recluse from realty in pursuit of the Unknown and the Ideal. Although Khnopff shared this idea, he departed from symbolist tradition by incorporating a political milieu in his paintings. First, I discuss Khnopff's early stage in the formation of his artistic concept, including his family background as well as his early opportunity to visit the Exposition Universelle in Paris where he formed his early interests in aesthetics, philosophy, literature, mythology and Egyptian art. His early works, La Painture, la Musique, la Poesie(1880-1881), Le Crise(1881), and En ecoutant Schuman(1883) reveal his favorite subjects which were quite prevalent in the symbolist traditions of both Belgium and France. By looking at Khnopff's paintings, I endeavor to situate his Symbolism in the context of the development of Belgian modernity and cultural nationalism. Second, my analysis of Khnopff creates a new overview of Symbolism in Europe, especially in Belgium. In the absence of socio-political integration, the Symbolist painter adds nostalgic meaning to the landscape of Bruges. The scene of Bruges illuminates the social atmosphere in Belgium at that time. Since Belgium became an independent country, it tried to differentiate its own cultural and national identity from France. There was a powerful social movement for Belgium to claim its own identity, language, and culture. Bruges was, for Symbolists, the epitome of Belgium's past glory. This encouraged the formation of Belgian nationalism centering on Brussels, as I demonstrate in Khnopff's Bruges-la-Morte(1892). The relationship between Symbolist artist and writers is crucial for understanding this development. Khnopff, for instance, illustrated or provided frontispieces for many Symbolist writers such as Rodenbach, Peladan, Spencer and Le Roy. Khnopff did not objectify the exact meaning, but rather provided his own subjective interpretation. In this respect, I Lock My Door, inspired by Rossetti, started from the same motif, but Khnopff seeked escape into silence and death while Rossetti searched for Christian salvation. Finally my paper deals with the social context in which Khnopff worked. He was a founding member of Les XX in 1883 and later La Libre Esthethetique he also participated in the exhibition of le Salon de la Rose + Croix. Les XX was not a particular school of art and did not have a uniform manifesto, but its exhibitions focused on decorative arts by encompassing art for all people via common, everyday objects. The Periodical, L'art moderne was founded to support this ideal by Edmond Picard and Maux. Les XX declared art as independent art, detached from all official connections. Khnopff designed the 1890 catalogue cover of Les XX and the 1891 cover. These designs show decorative element of Art Nouveau in an early example of "modern poster." Les XX pursued all art including graphic arts, prints, placard, posters and book illustrations and design. These forms of art were l'art social and this movement was formed by the social atmosphere in Belgium in terms of social reforms and strikes by working class. Khnopff designed the book cover for la Maison du Peuple. The artist, however, did not share the ideal egalitarianism of the working class to a certain degree, while he was working in his villa he designed under the ideal motto, "on n'a pas que," he expressed the nihilistic emotions toward society by the theme of interiority such as solitude, silence, narcissism, introspection, and introversion. In the middle of his Symbolism, we find the "cultural nostalgia" or longing that the artist develops in the I Lock My Door upon Myself. Khnopff's longing toward the lost city of "Bruges" form the crux of his "Social Symbolism."