• 한국습지학회지
• /
• 제19권2호
• /
• pp.202-210
• /
• 2017

전단응력은 여러 분야에서 사용하는 매우 중요한 역학 인자 중 하나이며, 인공수로의 설계를 위해서 중요하다. 현재 전단응력은 과거에 정해진 계산법을 사용하고 있지만, 사용되는 식에서 바닥전단응력과 에너지경사와 같이 실제로 측정하거나 계산하기 어려운 요소들이 존재한다. 특히, 에너지경사는 산정하기 매우 어려운 인자이며, 전단응력분포를 구하기위해서는 에너지경사가 있어야만 산정할 수 있지만, 경계층의 유속기울기와 유속을 측정하는 것은 현실적으로 어려운 부분이다. 또한 전단응력분포 중 바닥전단응력은 직접 측정하기 매우 어렵고, 유속에 비해 연구가 다소 더딘 실정이다. 전단응력분포를 정확하게 산정할 수 있다면, 바닥전단응력과 에너지경사를 손쉽게 산정할 수 있다. 본 연구에서는 에너지경사를 반영하지 않고 엔트로피 M을 이용하여 평균유속과 전단응력분포를 간단히 산정하는 연구를 진행하였고, 적용한 식의 효용성을 증명하기 위해 기존의 실험실 실측 자료를 사용하였다. 이는 그래프를 통해 응력분포를 나타내어 비교분석을 하였으며, 등류와 부등류에서 각각 결정계수는 0.930-0.998까지로 거의 일치하였다.

• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.418-423
• /
• 2003

AC loss is an important issue in the design of high-T$\sub$c/ superconducting power cables which consist of a number of Bi-2223 tapes wound on a former. In the cables, the tapes have different critical currents intrinsically. And they are electrically connected to each other and current leads. These make loss measurements considerably complex, especially for short samples of laboratory size. So special cautions are required in the positioning of voltage leads for measuring the true loss voltage. In this work we have prepared a conductor composed of three Bi-2223 tapes with different critical currents. The critical current and AC loss characteristics in the conductor have experimentally investigated. The results show that for uniform current distributions the conductor's critical current is proportional to the critical current of the Bi-2223 tape to which a voltage lead is attached. However it depends on the current non-uniformity parameter in the conductor rather than the tape's critical currents for nonuniform current distributions. The loss tests indicate that the AC loss is dependent on arrangements of voltage leads but not on their contact positions. The measured losses in the conductor also agree well with the sum of the transport losses measured in each Bi-2223 tape.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.115-116
• /
• 2008

YBCO materials in the form of large single crystals without weak link probleum is necessary. A refreshment and uniform distribution of the Y211 particles in the YECO were achived by sintering the Ag doped samples. The $em{\backslash}nhancement$ of the critical current density was ascribable to a fine dispersion of the YBCO particles, a low porasity and the persence of Ag particles. In $addir{\backslash}tion$, we have designed and manufactured large YBCO single domain with levitation force.

• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1071-1080
• /
• 2018

The study of behavior and values of deformations in the geological medium makes the scientific basis of the methodology of synthesis of true values of parameters of its physico-mechanical and density properties taking into account the influence of geodynamic impacts. The segments of continuous variation of homogeneous elastic uniform deformations are determined under overall compression of the medium. The limits of these segments are defined according to the criteria of instability (on geometric form changes and on "internal" instability). Analytical formulae are obtained to calculate current and limiting (critical) values of deformations within the framework of various variants of small and large initial deformations of the non-classically linearized approach of non-linear elastodynamics. The distribution of deformation becomes non-uniform in the medium while the limiting values of deformations are achieved. The proposed analytical formulae are applicable only within homogeneous distribution of deformations. Numerical experiments are carried out for various elastic potentials. It is found that various forms of instability can precede phase transitions and destruction. The influence of these deformation phenomena should be removed while the physico-mechanical and density parameters of the deformed media are determined. In particular, it is necessary to use the formulae proposed in this paper for this purpose.

• 전자공학회논문지 IE
• /
• 제43권1호
• /
• pp.59-66
• /
• 2006

본 연구에서는 동기 구동형 이동 로봇의 제어를 위한 운동 방정식, 주어진 지도 내의 목표 지점으로의 최적 경로 생성과 경로 추적을 위한 경로 계획, 그리고 이동 로봇의 위치를 측정하기 위한 균등 군집 몬테카를로 위치 측정 기법을 제안하였다. 이동 로봇의 위치 측정 실험을 통해 총 73회 반복된 위치 측정에서 기존의 몬테카를로 위치 측정의 평균 수행 속도가 12.8ms로 측정된 반면, 균등 군집 관리 몬테카를로 위치 측정의 평균 수행 속도는 9.3ms로 측정되었다. 또한 기존의 몬테카를로 위치 측정 기법이 위치 측정에 실패하는 동일 환경에서 균등 군집 몬테카를로 기법은 올바른 일치 측정의 결과를 보임을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.265-270
• /
• 2007

Polarization imaging systems have been widely used to selectively characterize skin lesions. Nevertheless, current systems are used in single-mode due to the limitations of a fixed polarization mode and a single-working distance of light source, in which uniform light distribution is achieved on target area. To address such limitations, we developed a variable polarization imaging system based on multi-working distance of light source for various clinical diagnoses. In this study, we characterize the imaging system and present experiment results demonstrating its clinical usefulness. The imaging system consists of a CCD color camera, linear polarization filters, and a single-layered LED ring light source which provides uniform light distribution at multi-working distances. The first polarizer was placed on the light source and the second polarizer placed on objective lens provides continuous linear polarization angle from $0^{\circ}\;to\;90^{\circ}$. The clinical efficacy of the imaging system was investigated by acquiring and analyzing clinical images of skin wrinkle and dental plaque. With the experiments, we verified the potential usefulness of the imaging system for other clinical applications.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.963-972
• /
• 2003

Performance characteristics of the planar-type solid oxide fuel cell (SOFC) are investigated by the analysis of flow fields coupled with heat and mass transfer phenomena in anode and cathode channels. For these purposes, performance analysis of the SOFC is conducted based on electrochemical reaction phenomena in electrodes and electrolyte coupled with flow fields in anode and cathode channels. In the present study, the isothermal model adopted in the previous paper prepared by the same authors is extended to the non-isothermal model by solving energy equation additionally with momentum and mass transfer equations using CFD technique. It is found that the difference between isothermal and non-isothermal models come from non-uniform temperature distribution along anode and cathode electrodes by solving energy equation in non-isothermal model. Non-uniform temperature distribution in non-isothermal model contributes to the increase of average temperature of the fuel cell and influences its performance characteristics.

• 한국세라믹학회지
• /
• 제29권4호
• /
• pp.253-258
• /
• 1992

ZnO varistors were prepared by the organochemical method which used citric acid and ethylene glycol as gelling agents. The microstructure of the sintered specimens exhibited small grains, uniform grain size distribution, and few intragranular pores. Thermal decomposition of the organic resin formed during the powder preparation process was completed around 450$^{\circ}C$. No significant changes were observed in microstructure and current voltage characteristic with respect to calcination temperatures. A major advantage of the organochemical method used in this experiment is a possible uniform mixing of trace amounts of dopants. Therefore, this powder preparation method seems promising in investigating the effect of Li or In ion, which is added in ppm level to ZnO varistors, on the pulse respose characteristic.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2013-2018
• /
• 2014

According to the manufacturing process of the laminated stator core for an inserted permanent magnet synchronous motor (IPMSM), the iron loss may be different. It is because the mechanical stress imposed to electrical steel sheet is strongly dependent on the manufacturing process. This paper proposes a new iron loss measurement algorithm which utilizes the induced voltage of a search coil and exciting current. The method is effective even when the distribution of magnetic flux density is not uniform along the magnetic flux path as well as uniform. The developed iron loss measurement system is applied to bonded- and embossed-type segmented stator cores of an IPMSM, and the iron losses are quantitatively compared.

• Advances in aircraft and spacecraft science
• /
• 제6권3호
• /
• pp.207-223
• /
• 2019

Current investigation deals with the thermal stability characteristics of carbon nanotube reinforced composite beams (CNTRC) on elastic foundation and subjected to external uniform temperature rise loading. The single-walled carbon nanotubes (SWCNTs) are supposed to have a distribution as being uniform or functionally graded form. The material properties of the matrix as well as reinforcements are presumed to be temperature dependent and evaluated through the extended rule of mixture which incorporates efficiency parameters to capture the size dependency of the nanocomposite properties. The governing differential equations are achieved based on the minimum total potential energy principle and Euler-Bernoulli beam model. The obtained results are checked with the available data in the literature. Numerical results are supplied to examine the effects of numerous parameters including length to thickness ratio, elastic foundations, temperature change, and nanotube volume fraction on the thermal stability behaviors of FG-CNT beams.