• The Plant Pathology Journal
• /
• 제20권1호
• /
• pp.67-74
• /
• 2004

A complete understanding of the epidemiological factors required for optimum for disease development facilitates the design of effective and reliable screening techniques and also disease prediction models. An attempt was made to study the effects of different temperatures ($15-35^{\circ}C$) and leaf wetness periods (4-24 h) on the development of late leaf spot (LLS) in three groundnut genotypes differing in their susceptibility to LLS infection. Irrespective of the genotype, the disease progress evaluated based on different components of resistance was maximum between $15-20^{\circ}C$ and minimum between $20-25^{\circ}C$. At temperatures $\geq$$30^{\circ}C$, LLS development was insignificant. The overall severity of LLS increased with an increase in the leaf wetness period from 4 h to 12 h a day. Further increase of wetness period to 16 h resulted in a rapid increase in the severity. Thereafter, the disease severity gradually decreased with an increase in the wetness period. The effect of temperature and wetness periods on the individual component of disease quantification was not uniform compared between genotypes with different levels of susceptibility/resistance to LLS infection. The results of this study indicate that temperature and leaf wetness period are critical in late leaf spot screening programs since the expression of disease symptoms measured from disease initiation till defoliation, varied differently in the test genotypes with respect to change in these two parameters.

• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.357-386
• /
• 2016

In this research work, an exact analytical solution for thermal stability of solar functionally graded rectangular plates subjected to uniform, linear and non-linear temperature rises across the thickness direction is developed. It is assumed that the plate rests on two-parameter elastic foundation and its material properties vary through the thickness of the plate as a power function. The neutral surface position for such plate is determined, and the efficient hyperbolic plate theory based on exact neutral surface position is employed to derive the governing stability equations. The displacement field is chosen based on assumptions that the in-plane and transverse displacements consist of bending and shear components, and the shear components of in-plane displacements give rise to the quadratic distribution of transverse shear stress through the thickness in such a way that shear stresses vanish on the plate surfaces. Therefore, there is no need to use shear correction factor. Just four unknown displacement functions are used in the present theory against five unknown displacement functions used in the corresponding ones. The non-linear strain-displacement relations are also taken into consideration. The influences of many plate parameters on buckling temperature difference will be investigated. Numerical results are presented for the present theory, demonstrating its importance and accuracy in comparison to other theories.

• 한국수자원학회논문집
• /
• 제37권9호
• /
• pp.737-744
• /
• 2004

본 연구에서는 산림식생에 따른 장기적인 측면에서의 유역 물수지 영향을 살펴보기 위하여 보청천 유역을 대상유역으로 선정하고, 준분포형 매개변수 모형인 SWAT 모형을 적용하여, 침엽수와 활엽수에 따른 증발산, 지표유출, 중간유출, 기저유출, 총 유출의 차이를 검토하였다. 먼저 SWAT 모형내 식생 생장 알고리즘을 수정하여 연중 일정한 엽면적지수를 갖는 국내 침엽수림의 생장 특성을 반영할 수 있도록 하였으며, 대상유역을 하나의 토지피복을 갖는 가상의 유역으로 설정한 후, 수정된 SWAT 모형을 적용하여 각 물수지 요소 변화를 모의한 결과, 침엽수가 활엽수에 비해 증발산 증가 및 유출 감소에 더 영향을 미치는 것으로 나타났다. 그러나, 보다 정량적인 규명과 유출모형의 불확실성을 보완하기 위해서는 수종 외에 수령, 식재밀도, 식재위치, 토양특성자료 등 다양한 조건이 충분히 고려되어야 할 것이다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1018-1021
• /
• 2006

Powdered metal parts and components may be carburized successfully in a vacuum furnace by combining carburizing technology $VacCarb^{TM}$ with a hi-tech control system. This approach is different from traditional carburizing methods, because vacuum carburizing is a non-equilibrium process. It is not possible to set the carbon potential as in a traditional carburizing atmosphere and control its composition in order to obtain a desired carburized case. This paper presents test results that demonstrate that vacuum carburizing system $VacCarb^{TM}$ carburized P.M. materials faster than traditional steel with acceptable results. In the experiments conducted, PM samples with the lowest density and open porosity showed a dramatic increase in the surface carbon content up to 2.5%C and a 3 times deeper case. Currently the boost-diffusion technique is applied to control the surface carbon content and distribution in the case. In the first boost step, the flow of the carburizing gas has to be sufficient to saturate the austenite, while avoiding soot deposition and formation of massive carbides. To accomplish this goal, the proper gas flow rate has to be calculated. In the case of P.M. parts, more carbon can be absorbed by the part's surface because of the additional internal surface area created by pores present in the carburized case. This amount will depend on the density of the part, the densification grade of the surface layer and the stage of the surface. "as machined" or "as sintered". It is believed that enhanced gas diffusion after initial evacuation of the P.M. parts leads to faster carburization from within the pores, especially when pores are open . surface "as sintered" and interconnected . low density. A serious problem with vacuum carburizing is delivery of the carbon in a uniform manner to the work pieces. This led to the development of the different methods of carburizing gas circulation such as the pulse/pump method or the pulse/pause technique applied in SECO/WARWICK's $VacCarb^{TM}$ Technology. In both cases, each pressure change may deliver fresh carburizing atmosphere into the pores and leads to faster carburization from within the pores. Since today's control of vacuum carburizing is based largely on empirical results, presented experiments may lead to better understanding and improved control of the process.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.124-129
• /
• 2015

Organic electronics are the domain in which the components and circuits are made of organic materials. This new electronics help to realize electronic and optoelectronic devices on flexible substrates. In recent years, organic materials have replaced conventional semiconductors in many electronic components such as, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic (OPVs). It is well known that organic light emitting diodes (OLEDs) have many advantages in comparison with inorganic light-emitting diodes LEDs. These advantages include the low price of manufacturing, large area of electroluminescent display, uniform emission and lower the requirement for power. The aim of this paper is to model polymer LEDs and OLEDs made with small molecules for studying the electrical and optical characteristics. The purpose of this modeling process is, to obtain information about the running of OLEDs, as well as, the injection and charge transport mechanisms. The first simulation structure used in this paper is a mono layer device; typically consisting of the poly (2-methoxy-5(2'-ethyl) hexoxy-phenylenevinylene) (MEH-PPV) polymer sandwiched between an anode with a high work function, usually an indium tin oxide (ITO) substrate, and a cathode with a relatively low work function, such as Al. Electrons will then be injected from the cathode and recombine with electron holes injected from the anode, emitting light. In the second structure, we replaced MEH-PPV by tris (8-hydroxyquinolinato) aluminum (Alq₃). This simulation uses, the Poole-Frenkel -like mobility model and the Langevin bimolecular recombination model as the transport and recombination mechanism. These models are enabled in ATLAS- SILVACO. To optimize OLED performance, we propose to change some parameters in this device, such as doping concentration, thickness and electrode materials.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.122-125
• /
• 2008

Generally, in shipbuilding, large curved block components which have large curvature radius along various directions are used for huge ships such as LPG-vessel and oil tanker ships. Lots of the blocks are manufactured by line heating method which uses a heat source to bend the thick plate materials. The conventional forming process is entirely dependent on the experience of experts because it is done by manual method thus the curvatures and qualities are not uniform even for same part. However, it is hard to adopt the press forming process using die tool sets fur the manufacturing because of the characteristics of the industry that based on the small quantity and variety in the products. In this study, flexible forming technology using numbers of punches is investigated based on the simulation to substitute for the conventional forming method. Thick plate material model was applied to the proposed process to verify the feasibility for hull structure block forming process. The press forming processes were simulated by adopting the explicit-to-implicit sequential solution. Moreover, experiment of the flexible forming process was also conducted and its results were compared with that of simulation.

• Journal of Ginseng Research
• /
• 제13권2호
• /
• pp.178-182
• /
• 1989

한국담배인삼공사에서 제조된 홍삼제품류 9종에 대한 유효성분함량의 품질관리 연구 일환으로 조사포닌, vanillin-$H_2SO_4$ 비색법에 의한 총사포닌 및 HPLC에 의한 개별 ginsenoside의 함량을 조사하였다. 홍삼을 분말형태로 가공한 의료용분말, 삼분, 타브렛 및 캡슐제품은 사포닌함량, PD/PT 사포닌의 함유비율, ginsenoside의 함량과 조성패턴이 거의 유사하였다. 그러나 홍삼을 추출하여 그 농축물을 인스턴트 제품화시킨 정분, 삼정, 삼정차, 삼정환 및 삼차는 총사포닌함량뿐 아니라 PD/PT사포닌의 함유비율, ginsenoside의 함량과 조성패턴이 상이하였다. 따라서 홍삼제품류별로 사포닌함량과 패턴을 표준화시키고 원료삼으로부터 최종제품까지 제조과정별 품질관리를 수행함으로서 사포닌패턴과 함량이 균일한 제품생산이 가능할 것으로 믿어진다.

• 한국전기전자재료학회논문지
• /
• 제28권5호
• /
• pp.285-290
• /
• 2015

The phase change memory material is an active element in phase change memory and exhibits reversible phase transition behavior by thermal energy input. The doping of the phase change memory material with Ga leads to the increase of its crystallization temperature and the improvement of its amorphous stability. In this study, we investigated the effect of GaGe sputtering power on the formation of the phase change memory material including Ga. The deposition rate linearly increased to a maximum of 127 nm and the surface roughness remained uniform as the GaGe sputtering power increased in the range from 0 to 75 W. The Ga concentration in the thin film material abruptly increased at the critical sputtering power of 60 W. This influence of GaGe sputtering power was confirmed to result from a combined sputtering-evaporation process of Ga occurring due to the low melting point of Ga ($29.77^{\circ}C$).

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.70-75
• /
• 2014

Permanent magnets have recently been considered as device that can be used to control the behavior of mechanical systems. Neodymium magnets, a type of permanent magnet, have been used in numerous mechanical devices. These are permanent magnets made from an alloy of neodymium, iron, and boron to form the Nd2Fe14B tetragonal crystalline structure. The magnetic selection, magnet core design and mechanical errors of the magnetic component can affect the performance of the magnetic force. In this study, the coercive force, residual induction, and the dimensions of the design parameters of the magnet core are optimized. The design parameters of magnet core are defined as the gap between the magnet and the core, the upper contact radius, and the lower thickness of the core. The force exercised on a permanent magnet in a non-uniform field is dependent on the magnetization orientation of the magnet. Non-uniformity of the polarization direction of the magnetic has been assumed to be caused by the angular error in the polarization direction. The variation in the magnetic performance is considered according to the center distance, the tilt of the magnetic components, and the polarization direction. The finite element method is used to analyze the magnetic force of an optimized cylindrical magnet.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.274-284
• /
• 1991

본 연구에서는 몇가지 단순한 스크린의 형상에 대하여 후류의 난류 특성치들 을 계측하여, 실제 현상을 파악하고 자료를 확보하여 앞으로의 연구에 활용하고자 하 였다.본 논문에서는 원형 스크린과 타원형 스크린을 기본 형상으로 택하여, 저항 계수를 변화시키면서, 후류유동장에서 평균속도 분포, 난류 운동에너지, 난류 전단응 력을 열선 풍속계로 계측하였다. 원형 스크린의 경우에는 주로 스크린의 모서리에서 발달하는 전단층의 확산과정을 연구하였고, 타원형 스크린의 경우에는 평균속도 분포 가 하류로 가면서 원형 후류로 발전되어가는 과정을 연구하였다.