• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1293-1298
• /
• 2011

This paper presents an Unified Index which can evaluate a performance of a distribution system based on value-based methodology. Reliability cost and voltage sags cost are calculated for each load point using Reliability Sector Customer Damage Function(SCDF). Aging cost is calculated for each load point using Aging SCDF. Power loss cost and operation cost are calculated for the system. By summation of each cost of load point and system, power quality cost can be obtained. Finally, this paper developed an unified index which can show the performance of a distribution system. Presented method has been applied to a real system, the usefulness of the method has been verified.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.76-83
• /
• 2012

Korean aviation Turbulenc Guidance (KTG) system is developed using the operational unified model (UM) of the Korea Meteorological Administration (KMA) and pilot reports (PIREPs) over East Asia. The KTG system comprised of twenty turbulence diagnostics that represent various turbulence potentials and have the best forecasting skills, which are combined into a single ensemble-averaged index, namely KTG, at upper-(above FL250) and mid-(below FL250) levels. It is found that the overall performance of the KTG is higher than those produced from the one single best index, and satisfies the minimum criteria (80% accuracy) that the system is operationally useful in aviation industry.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1132-1137
• /
• 2007

This paper describes a Unified Chassis Control (UCC) strategy to prevent vehicle rollover by integrating individual modular chassis control systems such as Electronic Stability Control (ESC) and Continuous Damping Control (CDC). The UCC threshold is determined from a rollover index computed by estimated roll angle, roll rate and measured lateral acceleration. A direct yaw moment control method is used to design the ESC based on a 2-D bicycle model. Similarly, the CDC is designed based on a 2-D roll model using a direct roll moment control method. The performance of the proposed UCC scheme is investigated and compared to that of modular chassis controllers through computer simulations using a validated vehicle simulator. It is shown that the proposed the UCC can lead to improvements in vehicle stability and efficient actuation of chassis control systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.34-43
• /
• 2007

This paper presents a methodology on the AHP(Analytic Hierarchy Process) to calculate unified power quality index which provide an overall assessment of the distribution system performance. To obtain the unified power quality index. we propose the use of the AHP model and consider contingency using Monte Carlo simulation. The proposed method is especially useful and effective for planning. We have applied the proposed method to an actual relatively large system.

• Steel and Composite Structures
• /
• v.51 no.2
• /
• pp.103-116
• /
• 2024

Based on the consistent couple stress theory (CCST), we develop a unified formulation for analyzing the static bending and free vibration behaviors of functionally graded (FG) microscale beams (MBs). The strong forms of the CCST-based Euler-Bernoulli, Timoshenko, and Reddy beam theories, as well as the CCST-based sinusoidal, exponential, and hyperbolic shear deformation beam theories, can be obtained by assigning some specific shape functions of the shear deformations varying through the thickness direction of the FGMBs in the unified formulation. The above theories are thus included as special cases of the unified CCST. A comparative study between the results obtained using a variety of CCST-based beam theories and those obtained using their modified couple stress theory-based counterparts is carried out. The impacts of some essential factors on the deformation, stress, and natural frequency parameters of the FGMBs are examined, including the material length-scale parameter, the aspect ratio, and the material-property gradient index.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.1
• /
• pp.58-68
• /
• 2002

Recently as recognition to prevent nature disasters is reaching the climax, the most important job of government official is to provide information related to the prevention of nature disasters through the Web and to bring notice to prevent disaster under people. Especially, if the case of daily forest fire hazard index is provided within visualization on Web, people may have more chances to understand about forest fire and less damages by large scale of forest fire. Forest fire hazard index presentation system developed in this paper presents daily forest fire hazard index on map visually also provides the information related to it in text format. In order to develop this system, CBDP(Component Based Development Process) is proposed in this paper. This development process tries to emphasize the view of reusability so that it has lifecycle which starts from requirement and domain analysis and finishes to component generation. Moreover, The concept of this development process tries to reflect component based method, which becomes hot issue in software field nowadays. In the future, the component developed in this paper may be possibly reused in other Web GIS application, which has similar function to it so that it may take less cost and time to develop other similar system.

• Journal of Korea Spatial Information System Society
• /
• v.7 no.1 s.13
• /
• pp.77-89
• /
• 2005

Recently, application area on the Location Based System(LBS) is increasing because of development of mobile-communication and GPS technique. Previous studies on the index of moving objects are classified as either index for past trajectories or current/future positions. It is necessary to develop a unified index because many applications need to process queries about both past trajectories and current/future positions at the same time. In this paper, the past trajectories of moving objects are represented as line segments and the current and future positions are represented as the function of time. We propose a new index called PCR-tree(Past, Current R-tree) for unification of past, current and future positions. Nodes of the index have bounding boxes that enclose all position data and entries in the nodes are accessed with only one interface. We implement the proposed index and show a feasibility of processing the queries about temporal-spatial domain with the query tool which we develop.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.531-536
• /
• 2007

This paper presents a power quality assessment model based on the Analytic hierarchy process. This model can assess unified power quality index which provide an overall performance of the distribution system. To obtain the unified power quality index, we propose the use of the AHP model which has three states: [Ideal]-[Actual]-[Worst]. The proposed method is especially useful and effective for planning. We have applied the proposed method to an actual relatively large system, and verified the usefulness.

• Journal of KIISE:Databases
• /
• v.33 no.3
• /
• pp.271-281
• /
• 2006

Recently the need for Location-Based Service (LBS) has increased due to the development and widespread use of the mobile devices (e.g., PDAs, cellular phones, labtop computers, GPS, and RFID etc). The core technology of LBS is a moving-objects database that stores and manages the positions of moving objects. To search for information quickly, the database needs to contain an index that supports both real-time position tracking and management of large numbers of updates. As a result, the index requires a structure operating in the main memory for real-time processing and requires a technique to migrate part of the index from the main memory to disk storage (or from disk storage to the main memory) to manage large volumes of data. To satisfy these requirements, this paper suggests a unified index scheme unifying the main memory and the disk as well as migration policies for migrating part of the index from the memory to the disk during a restriction in memory space. Migration policy determines a group of nodes, called the migration subtree, and migrates the group as a unit to reduce disk I/O. This method takes advantage of bulk operations and dynamic clustering. The unified index is created by applying various migration policies. This paper measures and compares the performance of the migration policies using experimental evaluation.

• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.247-255
• /
• 2015

When the new highway is opened, the new highway has alternative or linkage relationship with current highway networks. This change will lead to the different traffic patterns which can also lead to the change of toll revenue in other surrounding highways. This study investigates the change of revenue on the current highway networks caused by the new highway opening under the unified revenue system. Moreover, this study calculates the effectiveness of the revenue fluctuation when the highway system is under controlled by the public or private institution and proposes the meaning of the revenue fluctuation to those institutions. This study also proposes an index of revenue change that could be used to reflect the individual project evaluation and set the priority between multiple projects. Some limitations and future research agenda have also been discussed.