• 한국국방경영분석학회지
• /
• 제15권2호
• /
• pp.56-77
• /
• 1989

A new concept, namely the error discrimination of a code defined as the capability to not only detect errors from two distinct error sets but also to distinguish between them has been introduced in [SAKA 89a]. Consider $E_+\;and\;E_-$ as the two distinct error sets, namely the positive error set and the negative error set respectively. If a code C is not only capable of detecting any error e in {$E_+,\;E_-$}, but also able to identify the error set to which e belongs then the code is said to be an $E_+\;&\;E_-$ error discriminating code. The error discriminating property enables construction of unidirectional error detecting/correcting codes using asymmetric error control code. We derive here theory for asymmetric t error correcting and d error detecting codes. Furthermore, unidirectional error control code construction methods are introduced using asymmetric error control codes and $E_+\;&\;E_-$ error discriminating codes.

• 대한원격탐사학회지
• /
• 제36권4호
• /
• pp.515-525
• /
• 2020

This study investigates the potential of bidirectional long short-term memory (Bi-LSTM) for efficient modeling of temporal information in crop classification using multitemporal remote sensing images. Unlike unidirectional LSTM models that consider only either forward or backward states, Bi-LSTM could account for temporal dependency of time-series images in both forward and backward directions. This property of Bi-LSTM can be effectively applied to crop classification when it is difficult to obtain full time-series images covering the entire growth cycle of crops. The classification performance of the Bi-LSTM is compared with that of two unidirectional LSTM architectures (forward and backward) with respect to different input image combinations via a case study of crop classification in Anbadegi, Korea. When full time-series images were used as inputs for classification, the Bi-LSTM outperformed the other unidirectional LSTM architectures; however, the difference in classification accuracy from unidirectional LSTM was not substantial. On the contrary, when using multitemporal images that did not include useful information for the discrimination of crops, the Bi-LSTM could compensate for the information deficiency by including temporal information from both forward and backward states, thereby achieving the best classification accuracy, compared with the unidirectional LSTM. These case study results indicate the efficiency of the Bi-LSTM for crop classification, particularly when limited input images are available.

• 전기전자학회논문지
• /
• 제5권1호
• /
• pp.59-66
• /
• 2001

본 논문에서는 단방향 링크를 포함하는 이동 Ad Hoc 망에 대해 비대칭 경로를 지원하는 동적 소스 라우팅 프로토콜을 제안하였다. 기존의 동적 소스 라우팅 프로토콜은 양방향 링크로 구성된 대칭경로만을 지원하도록 구현되어있다. 그러나 실제적인 무선환경에서는 단말의 비대칭성이나 무선환경 특성등에 기인한 단방향 링크가 존재할 수 있다. 따라서 본 논문에서는 좀 더 일반적인 무선환경에 맞는 이동 Ad Hoc 망 라우팅 프로토콜을 구현하기 위하여 단방향 링크를 지원하도록 하였다. 특히 이동성으로 인한 경로 실패를 인식한 경우, 신속한 경로 재설정을 수행하기 위해 다중경로유지 기법을 사용하였다. 성능평가는 평균 경로설정시간 및 평균 데이터수신율에 대해 수행하였으며, 그 값을 얻기 위해 경로 상에 중간노드캐쉬의 사용여부 및 서로 다른 이동성과 연결성을 제공하는 시나리오를 고려하여, 100초 단위로 900초까지 성능평가를 수행하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.111-115
• /
• 2005

Recently, natural fibers draw much interests in composite industry due to low cost, light weight, and environment-friendly characteristics compared with glass fibers. In this study, mechanical properties were evaluated for two extreme cases of jute fiber orientations, i.e. the unidirectional yarn composites and the felt fabric composites. Samples of jute fiber composites were fabricated by RTM process using epoxy resin, and tensile, compression, and shear tests were conducted. As can be expected, unidirectional fiber specimens in longitudinal direction showed the highest strength and modulus. Compared with glass/epoxy composites of the similar fabric architecture and fiber volume fraction, the tensile strength and modulus of jute felt/epoxy composites reached only 40% and 50% levels. However, the specific tensile strength and modulus increased to 80% and 90% of the glass/epoxy composites. The main reason for the poor mechanical properties of jute composites is associated with the weak interfacial bonding between fiber and matrix. The effect of surface treatment of jute fibers on the interfacial bonding will be examined in the future work.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.697-702
• /
• 2012

In this study, unidirectional and plain woven carbon fiber reinforced magnesium matrix composite laminates were fabricated by the liquid pressing infiltration process, and evolutions of the microstructure and compressive strength of the composite laminates under corrosion were investigated by static immersion tests. In the case of the unidirectional composite laminate, the main microstructural damage during immersion appeared as a form of corrosion induced cracks, which were formed at both CF/Mg interfaces and the interfaces between layers. On the otherhand, wrap/fill interface cracks were mainly formed in the plain woven composite laminate, without any cracks at the CF/Mg interface. The formation of these cracks was considered to be associated with internal thermal residual stress, which was generated during cooling after the fabrication process of these materials. As a consequence of the corrosion induced cracks, the thickness of both laminates increased in directions vertical to the fibers with increasing immersion time. With increasing immersion time, the compressive strengths of both composite laminates also decreased continuously. It was found that the plain woven composite laminates have superior corrosion resistance and stability under a corrosive condition than unidirectional laminates.

• 한국통신학회논문지
• /
• 제27권4C호
• /
• pp.273-281
• /
• 2002

최근 실시간 데이터와 멀티미디어 데이터의 수요가 급격히 증가하고 있으며, 이동 애드 혹 네트워크에서 최선형(best effort) 서비스의 지원만으로는 이러한 데이터의 전송을 효율적으로 수행하는 것이 불가능하다. 따라서 통신자원들을 사전에 예약하는 QoS(Quality of Service) 지원형 서비스가 절대적으로 필요하다. 노드간의 링크가 양방향이라고 가정한 기존의 라우팅 프로토콜은 경로 발견과 유지가 편리한 반면에 실제적인 무선 환경에서 시간에 따라 변하는 무선 링크의 특성에 기인되는 단방향 링크에 대해서는 라우팅 기능을 지원 할 수 없다. 이러한 문제점을 해결하기 위해서 본 논문에서는 단방향 링크를 지원하구 각 노드에서 사용 가능한 통신 자원을 미리 고려하여 QoS 지원에 적합한 최단 경로를 설정함으로써 자원 소비를 줄일 수 있는 단방향 QoS 라우팅 프로토콜을 제안했다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.157-163
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ration cause decrease of joining efficiency after of GMT-Sheet, joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We have better design the structure so as not occur to stress centralization on the joining part.

• Composites Research
• /
• 제13권5호
• /
• pp.18-30
• /
• 2000

일축방향 섬유강화 복합재료 C링의 최적설계를 위하여, 이의 점 하중 하에서의 점탄성적 하중완화거동을 해석하였다. 이를 위하여 곡선보의 굽힘 이론을 이용하여 탄성학적 처짐과 굽힘 강성의 해석을 수행한 후 상당원리(correspondence theorem)를 이용하여 점탄성학적 하중완화 거동을 해석하였다. 일축방향 섬유강화 복합재료의 직교이방성 뿐만 아니라 복합재료의 인장강성과 압축강성의 차이에서 기인하는 비대칭물성도 함께 고려하였다. 그 결과 C링의 단면의 두께가 반지름에 비해 충분히 작은 보라면 보이론만으로도 정확하게 곡선보를 해석할 수 있고 하중완화 이론값 또한 실험값과 잘 일치하고 있음을 알 수 있었다.

• 한국컴퓨터산업학회논문지
• /
• 제2권9호
• /
• pp.1219-1224
• /
• 2001

실제 이동 Ad Hoc 네트워크상의 단말기 혹은 무선 환경의 비대칭성에는 단방향 링크가 존재한다. 이에 현재 기존의 이동 Ad Hoc 라우팅 프로토콜을 양방향 링크만을 지원할 수 있도록 구현하였으며, 본 논문에서는 새로운 라우팅 프로토콜을 구현하기 위하여 기존의 동적 소스라우팅 프로토콜을 확장하여 단방향 링크를 가지고 있는 이동 Ad Hoc 네트워크에 적용하였다. 성능평가를 위하여 이동시나리오 파일의 결합과 카네기멜론 대학의 연결 패턴파일을 사용하였다. 또한 수신 데이터율과 평균경로발견시간을 평가 요소로 고려하였으며, 제안된 세 가지 경로 설정 방법을 비교 평가하였다.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2792-2799
• /
• 1996

It was shown in the previous study that the numerically derived elastic work factor for CLS specimen was independent of fiber direction for a unidirectional case. Also, it was proposed the elastic work factor could be used to determine energy release rate from a single test record. In the present study, elastic work factor was derived from a simple beam theory to investigate its dependence on material property and geometric condition. Also, the elastic work factor of CLS specimen was applied experimentally to determine critical energy release rate in order to prove its validity determining critical energy release rate from a single specimen. For this purpose, critical energy release rate determined using the elastic work factor was compared with that determined by the compliance method. The results showed that while elastic work factor is affected by $t_2/t_1$ and $L_2/L_1$ it is independent of fiber angle for a unidirectional case. It was also found that critical energy release rates determined by both methods are comparable each other, thus elastic work factor approach can be used to determine energy release rate from a single test specimen.