• 터널과지하공간
• /
• 제28권1호
• /
• pp.72-96
• /
• 2018

암반에서 공사를 수행하는 경우에는 공사의 안정성 확보를 위하여 대상 암반의 일축압축강도를 정확히 평가해야 한다. 그러나 일축압축강도를 산정하기 위해서는 많은 비용과 시간이 필요하다. 또한 현장에서는 암석의 일축압축강도시험을 수행할 수 없다는 문제점이 있다. 이러한 문제를 해결하기 위해 점하중강도 시험을 이용하여 암석의 일축압축강도를 산정하는 방법이 외국의 많은 연구자들에 의하여 조사되었다. 그러나 외국의 암석에서 얻어진 연구결과를 그대로 국내에서 적용하는 것은 신뢰성에 문제가 있을 수 있다. 본 연구에서는 국내 암석에 대한 점하중강도지수와 일축압축강도의 상관관계를 광범위한 국내 외 문헌조사와 실내시험 결과를 통하여 도표로 제시하였다. 본 연구결과는 국내 암석의 일축압축강도를 간편하고 신속하게 추정하는데 활용될 수 있을 것으로 기대된다.

• 터널과지하공간
• /
• 제7권2호
• /
• pp.108-115
• /
• 1997

Uniaxial and biaxial compressive tests were conducted on limestone specimens containing artificial joints and a circular hole to investigate the influence of inclination and number of joints on compressive strength and deformation behavior of rock with a circular hole. Under uniaxial and biaxial compressive condition, the inclination of joints showing the maximum and minimum strength were 0$^{\circ}$ and 30$^{\circ}$ respectively, which was independent of the number of joints. Under uniaxial compressive condition, relative maximum strength of rock with n=1 and 3 to intact rock with a circular hole were 12.5%~82.8% and 11.4~62.5% respectively, and under biaxial compressive condition, 18.2~91.0% and 17.0~87.5% respectively. The influence of the number of joints on the decrease of compressive strength was greater under uniaxial than under biaxial compressive condition. Under uniaxial and biaxial compressive condition, axial and lateral deformations of rock showed the least values where $\alpha$=30$^{\circ}$. Under uniaxial compressive condition, axial and lateral deformation at maximum strength of rock have the increasing tendency with increase the number of joints. But they have the decreasing tendency under biaxial compressive condition. Under uniaxial and biaxial compressive conditions, axial deformation of circular hole was greater than lateral deformation without respect to the number of joints and the inclination of joints.

• 한국지반환경공학회 논문집
• /
• 제15권2호
• /
• pp.53-58
• /
• 2014

암석의 일축압축강도와 탄성계수는 암반구조물의 설계에 있어 매우 중요한 해석 변수이다. 그러나 일축압축시험은 시험시편 준비가 어렵고 시간이 오래 걸린다. 그래서 기술자들은 해석변수를 예측하기 위해 초음파속도시험과 같은 실험을 이용한다. 본 연구를 위해 115개의 화성암, 74개의 변성암, 55개의 퇴적암을 대상으로 일축압축시험과 초음파시험을 수행하고 회귀분석하여 일축압축강도와 탄성계수의 관계식을 구하였다. 일축압축강도와 P파속도의 더 좋은 상관성을 구하기 위해 P파속도에 단위중량을 곱한 값을 이용하였다. 초음파속도를 이용하여 일축압축강도와 탄성계수를 구하는 관계식은 신뢰할 수 있는 결과를 얻을 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.5-8
• /
• 2005

The purpose of this study is to investigate the mechanical characteristics of plain and steel fiber high strength concrete under uniaxial and biaxial loading condition. A number of plain and steel fiber high strength concrete cubes having 28 days compressive strength of 82.7Mpa (12,000psi) were made and tested. Four principal compression stress ratios, and four fiber concentrations were selected as major test variables. From test results, it is shown that confinement stress in minor stress direction has pronounced effect on the strength and deformational behavior. Both of the stiffness and ultimate strength of the plain and fiber high strength concrete increased. The maximum increase of ultimate strength occurred at biaxial stress ratio of 0.5 in the plain high strength concrete and the value were recorded 30 percent over than the strength under uniaxial condition. The failure modes of plain high strength concrete under uniaxial compression were shown as splitting type of failure but steel fiber concrete specimens under biaxial condition showed shear type failure.

• 터널과지하공간
• /
• 제14권4호
• /
• pp.261-268
• /
• 2004

The main objectives of this study are to investigate the anisotropic characteristics of rocks and to evaluate the relationships between physical properties. A series of experiments were performed in three mutually perpendicular directions for three rock types, which are granite, granitic gneiss and limestone. The relationships of measured physical properties were evaluated. The results of ultrasonic wave velocity measurement show that granite of three rock types gives the largest directional difference, and that the wave velocity in a plane parallel to a transversely isotropic one is dominantly faster than that in a subvertical or vertical plane. It implies that ultrasonic wave velocity for rock could be used as a useful tool for estimating the degree of anisotropy. The ratio of uniaxial compressive strength to Brazilian tensile strength ranges approximately from 13 to 16 for granite. from 8 to 9 for granite gneiss, and from 9 to 18 for limestone. The directional differences for granite and granitic gneiss are very small, and on the other hand, is relatively large for limestone. It is suggested that strength of rock makes quite difference depending on the rock types and loading directions, especially for the anisotropic rocks such as transversely isotropic or orthotropic rocks. The ratio of uniaxial compressive strength to point load strength index ranges from 18 to 20 for granite, from 17 to 19 for granitic gneiss, and from 21 to 24 for limestone. These results show that point load strength index makes also a difference depending on rock types and directions. Therefore. it should be noted that the ratio of uniaxial compressive strength to point load strength index could be applied to all rock types. Uniaxial compressive strength shows relatively good relationship with point load strength index, Schmidt hammer rebound value, and tensile strength. In particulat, point load strength index is shown to be the best comparative relationship. It is indicated that point load test is the most useful tool to estimate an uniaxial compressive strength indirectly.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.932-938
• /
• 2002

In structural applications, brittle materials such as soda-lime glasses and ceramics are usually subjected to multiaxial stress state. Brittle materials with cracks or damage by foreign object impacts are apt to fracture abruptly from cracks, because of their properities of very high strength and low fracture toughness. But in most cases, the residual strength of structural members with damage has been tested under uniaxial stress condition such as the 4-point bend test. Depending upon the crack pattern developed, the strength under multiaxial stress state might be different from the one under uniaxial. A comparative study was carried out to investigate the influence of stress state on the residual strength evaluation. In comparable tests, the residual strength under biaxial stress state by the ball-on-ring test was greater than that under the uniaxial one by the 4-point bend test, when a small size indendation crack was introduced. In the case that crack having an angle of 90deg. to the applied stress direction, the ratio of biaxial to uniaxial flexure strength was about 1.12. The residual strength was different from crack angles to loading direction when it was evaluated by the 4-point bend test. The ratio of residual strength of 45deg. crack to 90deg. one was about 1.20. In the case of specimen cracked by a spherical impact, it was shown that an overall decrease in flexure strength with increasing impact velocity, and the critical impact velocity for formation of a radial and/or cone crack was about 30m/s. In those cases that relatively large cracks were developed as compared with the case of indented cracks, the ratio of residual strength under biaxial stress state to one uniaxial became small.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.15-20
• /
• 2016

좁은 면적을 단기간에 개량시킬 수 있는 장점이 있는 그라우팅 공법은 지반의 특성과 지하수위 등에 따라 주입 효과의 차이가 있다. 특히 투수성이 큰 지반에서는 시간 경과에 따라서 용탈현상이 발생하여 강도저하 및 차수 성능이 저하되어 품질에 문제가 생길 수 있다. 최근 이와 같은 문제점을 해결하기 위해 초기강도 확보 및 용탈 방지와 동시에 균열 자기치유 특성을 가지는 SSG가 개발되었다. 이 연구에서는 두 가지 양생조건에 대해 SSG의 일축압축강도 시험을 수행하여 양생기간에 따른 일축압축 강도를 파악하였다. 또한 SSG와 기존의 LW 및 SGR의 일축압축강도와 비교하였다. 연구 결과, SSG가 상온 양생 및 저온 양생 모두에서 강도가 크게 측정되었으며, 초기 강도도 상대적으로 매우 우수한 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.137-142
• /
• 2001

In structural applications, brittle materials such as soda-lime glasses and ceramics are often subjected to multiaxial stress. Brittle materials with crack or damaged by foreign object impacts are abruptly fractured from cracks, because of their properities of very high strength and low fracture toughness. But in most cases, the residual strength has been derived from tests under uniaxial stress such as a 4-point bend test. The strengths under multiaxial stresses might be different from the strength. In comparable tests, the residual strength under biaxial stress state by the ball-on-ring test was greater than that under the uniaxial one by the 4-point bend test. In the case that crack having 90deg. to loading direction, the ratio of biaxial to uniaxial flexure strength was 1.12. At a different crack angle to loading direction when it was evaluated by the 4-point bend test, the residual strength was different and the ratio of 45deg. to 90deg. was 1.16.

• 대한토목학회논문집
• /
• 제30권2A호
• /
• pp.185-191
• /
• 2010

콘크리트 구조물의 사용성과 내구성 저하의 원인이 되는 균열은 응력의 크기, 응력구배 및 기타 구조적 재료적 원인 등에 의하여 발생하기 때문에 콘크리트의 균열강도를 정확히 예측하기는 매우 어렵다. 특히 판구조의 경우 기존의 일축휨강도에 의한 균열평가가 실제 구조물의 균열강도와 상이할 수 있다. 본 연구에서는 이축휨인장강도 평가에 적합한 시험체 제원을 적용하여 일축과 이축휨강도 특성을 비교, 평가하였다. 실험결과 골재의 크기 및 실험체 크기의 증가에 따라 일축 및 이축휨강도 모두 강도가 저하되는 것으로 나타났다. 일축휨강도에 비하여 이축휨강도가 일축휨강도의 39.5~99.2%로서 전반적으로 낮은 강도를 갖는 것으로 평가되었으며, 특히 20 mm 골재를 사용한 경우에는 76%정도로 고찰되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.53-54
• /
• 2015

As the result of uniaxial compression strength test on the CLMS mixing BFS and SS with BFS 4000, it required to determine the desired strength through increasing unit quantity of cement in mixing process because of dramatic strength deterioration of strength according to increasing replacing rate. In this study's result, regardless of differences in fine aggregates used, in order to get uniaxial compression strength in the scope exceeding criteria of minimum strength for applying to the field, the most reasonable combination was to mix replacing BFS with fineness of 6000 in 30%. For the CLMS mixing BFS and SS, in order to improve flow ability by securing quantity of minimum unit and to repress bleeding rate with securing uniaxial compress strength considering the field applicability, regardless of differences in fine aggregates used, to mix BFS over 6000 in 30% was most effective.