• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.166-167
• /
• 2019

In this study, to test the performance of concrete used as a concrete admixture as a recycling method of CGS, gypsum was mixed and the chloride ion penetration resistance test of CGS and BFS substituted concrete was conducted. As a result, it was found that without gypsum type test specimen, the CGS sustituted test specimens had lower chloride ion penetration resistance than the BFS substituted specimens. When gypsum was added, it was confirmed that the chloride ion penetration resistance was poor regardless of the type of admixture. In addition, it was confirmed that both admixtures were less resistant to chloride ion penetration than OPC, regardless of the presence of gypsum. However, considering the uneven quality variation of coal, which greatly affects the quality of CGS, further research is needed.

• Structural Engineering and Mechanics
• /
• 제3권1호
• /
• pp.11-23
• /
• 1995

The examined model consists of two substructures linked by a right angle rigid line joint. One element is a wall loaded externally along its upper edge by an uneven vertical load. The other element, defined as a plate, is not loaded. Stresses and displacements in the vicinity of the joint are analysed, considering the lateral distribution which leads to three-dimensional effects. The proposed solution combines classical approach with numerical means, using appropriate stress distribution polynomial functions along the joint. Space structure constructions supply cases of interest.

• 한국철도학회논문집
• /
• 제7권1호
• /
• pp.14-19
• /
• 2004

The effect of surface damage on fatigue properties of catenary wires were investigated to estimate their service lift. As surface defects of the wires caused by surface corrosion increase, surface roughness gets worse, and as roughness increases, it is easy for moisture coming from rain and dew to be condensed around uneven parts of the surface. The condensed moisture causes a locally severe corrosion which leads to damage of the wires. Corrosion of catenaty wires can make their actual lifetime shorter than that originally designed. The amount of decrease was more prominent as environmental conditions became more corrosive. They are also vibrated with some amplitude everytime pantographs touch contact line. The frequent cyclic load on the wire may result in a fatigue fracture. Surface damage by corrosion can make formation of crack initiation at fatigue. In the present study, the fatigue life of the used wire was measured 35 to 50% compared with that of new one in average.

• 통합자연과학논문집
• /
• 제5권3호
• /
• pp.195-197
• /
• 2012

Halogen atoms in a molecule are traditionally considered as electron donors, since they have unshared electrons. Normally when they are bonded, there are three lone pair electrons. These lone pairs can function as Lewis bases. However, when they are bound to electron withdrawing groups, they can act as Lewis acids. Since the situation is similar hydrogen bonding (HB), this type of interaction is named as halogen bonding (XB). This mainly comes from the uneven distribution of electron density around the halogen atoms. Since the electron density around halogen atom opposite to ${\sigma}$-bond is depleted, its electropositive region is called ${\sigma}$-hole. This ${\sigma}$-hole can attract halogen bond acceptors, requiring more stringent directionality compared to HB. Since this interaction mainly comes from electrostatic origin, the geometry tends to be linear. Since the XB energy is comparable to corresponding HB. Still in its infancy, XB shows a broad range of applicability, with potentially more useful properties, compared to corresponding HB.

• 설비공학논문집
• /
• 제15권11호
• /
• pp.970-978
• /
• 2003

This paper aims at suggesting design guidelines for a perimeter-less HVAC system that contributes energy savings. Perimeter-less HVAC system is one that relieves difficulties such as handling mixing loss, uneven radiative environment, and maintenance and repair. It prevents heat load gained through window and outdoor wall without modifying a previously equipped building skin system. In this paper, we conducted a large-scale model experiment to see how the push-pull air flow would handle indoor heat to obtain an optimized perimeter-less design, and then we plan to perform several kinds of CFD (computational fluid dynamics) cases through numerical simulation

• Geomechanics and Engineering
• /
• 제17권2호
• /
• pp.175-180
• /
• 2019

This research is concerned with post-buckling investigation of nano-scaled beams constructed from porous functionally graded (FG) materials taking into account geometrical imperfection shape. Hence, two types of nanobeams which are perfect and imperfect have been studied. Porous FG materials are classified based on even or uneven porosity distributions. A higher order nonlinear refined beam theory is used in the present research. Both perfect and imperfect nanobeams are formulated based on this refined theory. A detailed study is provided to understand the effects of geometric imperfection, pore distribution, material distribution and small scale effects on buckling of FG nanobeams.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.886-889
• /
• 2014

차량이 도로를 달리는데 있어서 절대적으로 꼭 필요한 타이어의 기능으로는 자동차의 하중을 지탱하고 자동차의 방향 전환 유지와, 노면 충격을 흡수 완화하며, 엔진의 구동력과 브레이킹 시 제동력을 노면에 전달하는 등의 기능이 있다. 이런 기능을 수행함에 있어 타이어의 상태는 안전과 직결된다고 볼 수 있다. 주행 중 운전자가 아무리 운전을 잘한다고 하더라도 타이어의 불량으로 인한 사고를 방지할 수는 없다. 자동차의 주행 안정성을 위한 타이어의 문제 중 타이어의 편마모는 운전자의 운전습관과 휠 얼라이먼트의 이상 등으로 타이어의 특정 부위가 마모되는 증상을 일컫는데, 현재까지 점검 방법으로는 정비사가 타이어를 눈과 손으로 점검하여 판단하고 있어서 점검하는 기준이 주관적이며, 정확하게 검증할 수 없는 것이 현실이다. 이에 본 논문에서는 현실의 애매모호한 주관적인 검증기준의 단점을 보완하고자 타이어의 실제 이미지를 디지털 영상처리 기법을 사용하여 각 타이어의 마모 정도를 체크하여 편마모를 객관적으로 점검할 수 있는 시스템을 설계하고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.501-504
• /
• 2014

자동차의 하중을 지탱하고 자동차의 방향 전환 유지와 노면 충격을 흡수 완화하며, 엔진의 구동력과 브레이크 작동 시 제동력을 노면에 전달하는 등의 기능을 수행하는 타이어의 상태는 안전과 직결되어 있다고 볼 수 있다. 주행 중 타이어의 불량으로 인한 사고는 무시할 수 없는 부분을 차지한다. 타이어의 편마모는 주행 안전성을 위한 타이어의 문제 중 하나로 운전자의 운전습관과 휠얼라이먼트의 이상 등으로 타이어의 특정 부위가 마모되는 증상을 말하는데, 객관적으로 정확하게 검증할 수 있는 측정방법이 없는 것이 현실이다. 본 논문에서는 현실의 주관적인 검증기준의 단점을 보완하고 키넥트 센서를 이용하여 각 타이어의 마모 정도를 체크하여 편마모를 객관적으로 검증할 수 있는 시스템을 설계하고자 한다.

• Mycobiology
• /
• 제48권6호
• /
• pp.443-449
• /
• 2020

Two new species, Thelopsis ullungdoensis and Phylloblastia gyeongsangbukensis are described from Ullung-Do (Island), South Korea. The closest relatives from Europe and Korea are epiphytic Thelopsis flaveola which differs by their immersed or semi-immersed yellow ascomata, ascospores without halo and their habitat of smooth bark (mainly Fagus) in humid and cold climates. Thelopsis gangwondoensis differs by its bigger semi-immersed ascomata (600-700 ㎛ in diam.), oblong halonate ascospores (8-12 × 6-8 ㎛) and its habitat of smooth bark of deciduous trees. P. gyeongsangbukensis differs from its relatives within the genus in having 5-septate ascospores (22-26 × 6-8 ㎛), semi-immersed, subglobose ascomata with a flattened top (250-400 ㎛) and a thin, matt, uneven gray-brown to gray-green continuous thallus without isidia.

• 한국운동역학회지
• /
• 제31권2호
• /
• pp.119-125
• /
• 2021

Objective: The purpose of this study was to identify the effect of dynamic postural balance control against tilting platform between golfers and non-golfers. Method: 24 golfers and 26 non-golfers were participated. Eight motion capture cameras, two force plates, and one dynamic balance control platform were used for sensory perception test. It was performed two-way repeated ANOVA with a Bonferroni adjustment at a significant level of a 0.05. Results: Golfers' perception ability was higher than non-golfer according to slope. the CoP, time, angle variables were indicated main effect and interaction effect between golfer and non-golfer. Conclusion: It was known that golfer's proprioception perception ability was higher than non-golfers. Repeated practice such as shots and putting on the uneven ground might improve their balance control.