• 제목/요약/키워드: Undrained shear strength

검색결과 231건 처리시간 0.021초

Cone 관입시험을 이용한 해양토질의 전단강도 산정에 대한 신뢰도 연구 (A Reliability Study on Estimating Shear Strength of Marine Soil using CPT)

  • 이인모;이명재
    • 한국지반공학회지:지반
    • /
    • 제3권2호
    • /
    • pp.17-28
    • /
    • 1987
  • 본연구에서는 해양토질의 전단강도 산정에 대한 Cone관입시험의 신뇌도를 조사하였다. 사질토에 대하여는 내부마찰각의 불확정성을 조사하였으며, 불확정성에는 자료의 공간적 변화와 해석에 사용 되는 공식의 모텔오차 등이 있고, 그중 해석모텔의 오차가 가장 큰 불확정성이었다. 해석 방법마다 구한 내부마찰각이 서로 다르므로, 해석결과를 종합할 수 있는 주관적 견해개념(subjective opinion) 을 도입하였다. Cone관입시험을 이용하여 잡토지반에서 비배빙전단강도를 산정하기 위해서는 실훈시험이나 현장베인 시험으로 구한 전단강도와 Cone 저항력의 경험적인 관계를 이용하여야 한다. 비배수전단강도의 불확정성은 Cone 계수(Nk)의 자료 산포, Nk의 모델 오차, 이방성과 Cone 저항력의 공간적 변화 등에 기인하며, Nk의 자료산포가 가장 큰 불확정성이었다. Nk값의 산정에 이용되는 비교강도시험은 실내시험보다는 현장베인시험의 신뢰성이 더 큰 것으로 나타났다.

  • PDF

CPTU 데이터를 이용한 저소성 실트 지반의 부분배수 강도 평가 (Evaluation on Partially Drained Strength of Silty Soil With Low Plasticity Using CPTU Data)

  • 김주현
    • 한국지반신소재학회논문집
    • /
    • 제16권2호
    • /
    • pp.55-66
    • /
    • 2017
  • 본 연구에서는 지반 특성에 관계없이 일률적으로 적용되는 피에조콘 관입속도 2cm/s 조건 하에서, 저소성 실트 지반의 경우 부분배수 내지는 완전 배수 현상이 발생된다는 관점에서 저소성 실트 지반의 비배수전단강도선과 완전배수 전단강도선 사이에서의 피에조콘계수($N_{kt}$)에 의한 전단강도 분포 경향을 기준으로 부분배수 전단강도를 평가하였다. 그 결과, 인천, 화성 및 군산 저소성 실트 지반의 부분배수 내부마찰각(${\varphi}^{\prime}$)은 $3{\sim}15^{\circ}$에서 분포하는 것으로 분석되었다. 한편, 강제치환 역해석 결과 및 비압밀비배수 삼축시험으로부터 얻어진 내부마찰각(${\varphi}^{\prime}$)은 소성지수 감소에 따라 $2{\sim}14^{\circ}$의 범위에서 분포되어, CPTU 데이터에 의한 부분배수 내부마찰각(${\varphi}^{\prime}$)과 유사한 경향을 나타내어 이에 대한 적용성을 확인할 수 있었다.

낙동강 모래의 반복응력이력에 의한 거동 (Behaviour of Nak-dong River Sand on Cyclic Stress History)

  • 김영수;박명렬;김병탁;이상복
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.295-302
    • /
    • 2000
  • Earthquakes not only produce additional load on the structures and underlying soil, but also change the strength characteristics of the soil. Therefore, in order to analyze soil structures for stability, the behaviour after earthquake must be considered. In this paper, a series of cyclic triaxial tests and monotonic triaxial tests were carried out to investigate the undrained shear strength and liquefaction strength characteristics of Nak-Dong River sand soils which were subjected to cyclic loading. The sample was consolidated in the first stage and then subjected to stress controlled cyclic loading with 0.1Hz. After the cyclic loading, the cyclic-induced excess pore water pressure was dissipated by opening the drainage valve and the sample was reconsolidated to the initial effective mean principal stress(p/sub c/'). After reconsolidation, the monotonic loading or cyclic loading were applied to the specimen. In the results, the undrained shear strength and liquefaction strength characteristics depended on the pore pressure ratio(Ur=U/p/sub c/'). The volume change following reconsolidation can be a function of cyclic-induced excess pore water pressure and the maximum double amplitude of axial strain.

  • PDF

A computational estimation model for the subgrade reaction modulus of soil improved with DCM columns

  • Dehghanbanadaki, Ali;Rashid, Ahmad Safuan A.;Ahmad, Kamarudin;Yunus, Nor Zurairahetty Mohd;Said, Khairun Nissa Mat
    • Geomechanics and Engineering
    • /
    • 제28권4호
    • /
    • pp.385-396
    • /
    • 2022
  • The accurate determination of the subgrade reaction modulus (Ks) of soil is an important factor for geotechnical engineers. This study estimated the Ks of soft soil improved with floating deep cement mixing (DCM) columns. A novel prediction model was developed that emphasizes the accuracy of identifying the most significant parameters of Ks. Several multi-layer perceptron (MLP) models that were trained using the Levenberg Marquardt (LM) backpropagation method were developed to estimate Ks. The models were trained using a reliable database containing the results of 36 physical modelling tests. The input parameters were the undrained shear strength of the DCM columns, undrained shear strength of soft soil, area improvement ratio and length-to-diameter ratio of the DCM columns. Grey wolf optimization (GWO) was coupled with the MLPs to improve the performance indices of the MLPs. Sensitivity tests were carried out to determine the importance of the input parameters for prediction of Ks. The results showed that both the MLP-LM and MLP-GWO methods showed high ability to predict Ks. However, it was shown that MLP-GWO (R = 0.9917, MSE = 0.28 (MN/m2/m)) performed better than MLP-LM (R =0.9126, MSE =6.1916 (MN/m2/m)). This proves the greater reliability of the proposed hybrid model of MLP-GWO in approximating the subgrade reaction modulus of soft soil improved with floating DCM columns. The results revealed that the undrained shear strength of the soil was the most effective factor for estimation of Ks.

부산지역 점토의 비배수전단강도 평가를 위한 CPT 콘계수 해석 및 평가 (Analysis and Evaluation of CPT Cone Factor for Undrained Shear Strength Estimation of Pusan Clay)

  • 박영환;김민기;김창동;이준환
    • 한국지반공학회논문집
    • /
    • 제23권8호
    • /
    • pp.77-85
    • /
    • 2007
  • 본 연구에서는 선정된 부산 신항만 공사 지역의 연약 점토층을 대상으로 비배수전단강도 값을 분석하고 CPT적용을 위한 콘계수의 변화특성 및 영향인자를 비교분석하고자 한다. 이를 위해 다양한 현장시험과 실내시험 결과를 분석하였으며, 현장시험에서 구해진 콘계수와 실내시험에서 얻어진 결과를 토대로 한 이론적인 콘계수와의 비교를 통해 해당 현장에 가장 적합한 이론식을 선정하고자 한다. 본 연구에서 사용된 이론식은 Baligh(1975)와 Yu(1993)의 공동 확장 이론과 Teh and Houlsby(1991)와 Yu 등(2000)의 정적 상태 해석법이 사용되었으며, 공동 확장 해석법이 현장 시험을 통해 측정된 콘계수와 부합하는 결과를 나타내었다.

Undrained strength-deformation characteristics of Bangkok Clay under general stress condition

  • Yimsiri, Siam;Ratananikom, Wanwarang;Fukuda, Fumihiko;Likitlersuang, Suched
    • Geomechanics and Engineering
    • /
    • 제5권5호
    • /
    • pp.419-445
    • /
    • 2013
  • This paper presents an experimental study on the influence of principal stress direction and magnitude of intermediate principal stress on the undrained stress-strain-strength behaviors of Bangkok Clay. The results of torsional shear hollow cylinder and advanced triaxial tests with various principal stress directions and magnitudes of intermediate principal stress on undisturbed Bangkok Clay specimens are presented. The analysis of testing results include: (i) stress-strain and pore pressure behaviors, (ii) stiffness characteristics, and (iii) strength characteristics. The results assert clear evidences of anisotropic characteristics of Bangkok Clay at pre-failure and failure conditions. The magnitude of intermediate principal stress for plane-strain condition is also investigated. Both failure surface and plastic potential in deviatoric plane of Bangkok Clay are demonstrated to be isotropic and of circular shape which implies an associated flow rule. It is also observed that the shape of failure surface in deviatoric plane changes its size, while retaining its circular shape, with the change in direction of major principal stress. Concerning the behavior of Bangkok Clay found from this study, the discussions on the effects of employed constitutive modeling approach on the resulting numerical analysis are made.

비압밀비배수 삼축압축시험에 의한 보강화강풍화토의 전단강도 특성 (Shear strength characteristics of reinforced decomposed granite soil by uncomsolidated-undrained triaxial compression test)

  • 조용성;구호본;박인준;김유성
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.103-110
    • /
    • 2006
  • When enforced earth is used for the retain wall and four walls, the most important thing would be how to maximize the land utilization. Accordingly, in case of enforced earth, we pile up the minimal height of earth$(20\sim30cm)$ and harden the earth using a static dynamic hardening machine. In this paper, we tried to analyze and. compare the stress transformation characteristics of reinforced weathered granite soil. with geosynthetics when repetitive load is added to the enforced earth structure and when static load is added. The purposes of the study are as follows; 1) To compare and analyze non reinforced weathered granite soil and reinforced weathered granite. soil by executing a unconsolidated-undrained triaxial compression tests. 2) To identify the strength characteristics of weathered granite soil reinforced with geotextile due to the repetitive dynamic loads through comparison of the stress due to the static load and the repetitive dynamic loads.

  • PDF

연직배수공법이 적용된 연약지반 상에 도로성토로 인한 측방유동의 특성 (Characteristics of Lateral Flow due to Embankments for Road Construction on Soft Grounds Using Vertical Drain Methods)

  • 홍원표;김정훈
    • 한국지반공학회논문집
    • /
    • 제28권9호
    • /
    • pp.5-15
    • /
    • 2012
  • 연직배수공법이 적용된 연약지반의 측방유동 특성을 조사하기 위해 우리나라 해안지역에서 계측관리가 실시된 13개 연약지반 현장의 자료를 수집하여 조사 분석을 실시하였다. 먼저 성토규모가 연약지반의 측방유동에 미치는 영향을 분석하였다. 연약층의 두께와 상대적 도로성토규모가 클수록 연약지반 속의 수평변위는 크게 발생하였다. 특히 연약지반이 두꺼우면 도로성토저면폭에 대한 연약층의 두께의 비인 상대적 성토규모도 자연 커지므로 수평변위량은 크게 발생하였다. 또한 도로성토속도가 빠르면 연약지반의 수평변위량이 크게 발생하였다. 그 밖에도 연약지반의 두께와 비배수전단강도, 지반계수 및 안정수는 연약지반의 측방유동에 영향을 미치는 중요한 요소로 나타났다. 즉 연약지반의 비배수전단강도와 지반계수가 작을수록 그리고 안정수가 클수록 연약지반의 최대수평변위량은 크게 발생하였다. 도로성토로 인하여 연약지반 속에 전단변형이 발생되지 않는 안전한 상태에서는 안정수가 3이하가 되고 지지 안전율이 1.7이상이 되었다. 그러나 연약지반 속에 전단파괴가 발생되는 불안전한 상태에서는 안정수가 5.14이상이 되고 지지안전율이 1.0이하가 되었다. 도로성토로 인하여 연약지반 속에 전단변형이 발생하는지 여부를 판단할 수 있는 허용최대수평변위량의 기준은 50mm로 정하는 것이 바람직하며 연약지반에 전단파괴가 발생됨이 없이 도로성토를 실시할 수 있는 연약지반의 수평변위량 기준은 100mm로 정하는 것이 바람직할 것이다.