• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.101-106
• /
• 2013

This paper proposes the new high precision monitoring sensor for the Marine Installation. Among variety of sensor network systems, wireless information transmission through the marine is one of the enabling technologies for the development of future marine-observation systems and sensor networks. Applications of marine monitoring range from oil industry to aquaculture, and include instrument monitoring, pollution control, climate recording, prediction of natural disturbances. For these marine applications to be available, however, the provision of precise location information using monitoring sensor is essential. In this paper, the dynamic characteristics for obtaining the location information of monitoring sensor is analyzed. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably excellent performance for the Monitoring for the Marine Installation.

• 한국해양공학회지
• /
• 제5권1호
• /
• pp.81-87
• /
• 1991

In this paper, an attempt has been taken for improving the weldability of wer welds of TMCP steel plate by shielding around weld arc surroundings. The principal results of this experimental investigation can be summarized as follows: 1) The cooling rates resulting from wet wlds with the developed electrode on TMCP steel plate could be lower than that of the non-shieled wet welds. 2) The metallurgical characteristics in umderwater wet welds of TMCP steel plate and the developed electrode could be improved by shielding around weld arc surroundings.

• 한국항해항만학회지
• /
• 제34권2호
• /
• pp.123-129
• /
• 2010

The object of this study is to develop the method of safe conducting of a vessel through stormy sea when we encounter typoon or hurricane on ocean. The scope of investigation in this paper will be limited to safe maneuvering related only with rolling motions of a vessel. The processes of investigations are as follows; Firstly, we decide a CPA(Closest Point of Approach) with the center of the storm and decide significant wave height($H_{1/3}$) by SMB method and then calculate wave height of the highest of 1000 waves($H_{1/1000}$) and other data. Secondly, we make mathematical model of rolling motions of the vessel on the stormy sea and calculate the biggest rolling angle of the vessel and etc. Thirdly, we decide the most safe maneuvering method to ride out the stormy sea. By the above mentioned method we are able to calculate the status of the stormy sea and ships motions to be encountered and ride out safely through violently rough sea.

• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.188-194
• /
• 2018

Recently a supercavitating underwater vehicle moving at high speed over 200 knots has been of interest for its practical advantage of the dramatic drag reduction. Many experimental and numerical studies have been explored, however most of the studies deal with the case of uniform flows. In this paper, we investigated physical behaviors of the artificial supercavity in a periodic gust flow. Experiments were carried out at a cavitation tunnel of the Chungnam National University(CNUCT), which is equipped to remove the gas supplied from outside of the tunnel. We devised an experimental apparatus generating vertical and horizontal gust flows, and investigated the supercavity formations at different periodic mode of the incoming flow.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.351-360
• /
• 2020

Of late, demand for test sites for marine equipment such as ASV, AUV, ROV, and various underwater sensors is increasing. The authors have focused on an oscillating water column (OWC), which is being constructed near Chagwido Island Jeju, as one of the test-sites. The main objective of the OWC is to produce wave energy and develop technologies. It has been built in the sea approximately 1 km off the coast. It has berth accommodation and some rooms that can be used as laboratories. To investigate the feasibility of its usage as a test site for marine equipment, we acquired bathymetric data around the OWC by using a multi-beam echo sounder and a single-beam scanning sonar. The accessibility of the OWC from nearby ports and the use of support vessels or ships were also investigated. 3D point cloud data from the multi-beam echo sounder and 2D acoustic images from the scanning sonar are expected to be used as references for identifying changes over time. In addition, through these experiments, we derived a procedure to use this facility as a test site by using the IDEF0 functional modelling method. Based on this preliminary investigation and previously reported examples, we determined the general conditions and preferences for evaluating the performance of various marine equipment heuristically. Finally, we developed five applications that were derived from this investigation.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.42-47
• /
• 2011

Going underwater is supposed to begin with the history of human beings. At first it was confined to relatively shallow level, less than several meters by holding breath. Recently, deep level diving has been necessary for such purpose as construction, maritime salvage, military operations, research and sports by using SCUBA(self-contained underwater breathing apparatus) equipment. As one goes down into water, the pressure on the diver is increased due to water pressure with depth, usually 1 atm for each 10 m water level. In deep water, mixed gas or nitrox(EAN, enriched air nitrox) could be applied for the divers lest they should get disease due to high pressure. Of these, the former is usually composed of oxygen and inert gas like helium or hydrogen, the latter contains higher oxygen content than that in normal air in which the oxygen concentration is designated by the character "EAN" followed by vol. % of oxygen, for example, "EAN 40" contains 40% of oxygen. In this case, a victim was found at the 39 m below the sea surface breathing air and nitrox in cylinder wrongly marked as EAN 36, which was analyzed to contain 63% of oxygen by GC/TCD. The cause of death could not be exactly related with the oxygen content in the nitrox cylinder, because the accurate depth for the victim to dive was not known, even though the victim was just found at the depth of 39 m. However, the wrongly marked nitrox could be believed to be the main cause of the death at the depth unless there happened any other accident except that during diving.

• 대한조선학회논문집
• /
• 제56권1호
• /
• pp.94-101
• /
• 2019

Underwater acoustic power should be measured in a free field, but it is not easy to implement. In practice, the measurement could be performed in a reverberant field such as a water-filled steel tank and concrete tank. In this case, the structure and the acoustic field are strongly or weakly coupled according to material properties of the steel and water. So, characteristics of the water tank must be investigated in order to get the accurate underwater acoustic power. In detail, modal frequencies, mode shapes of the structure and frequency response functions of the acoustic field could represent the characteristics of the reverberant water tank. In this paper, the structure-acoustic coupling has been investigated on a reverberant water tank numerically and experimentally. The finite element analysis has been carried out to estimate the structural and acoustical modal parameters under the dry and water-filled conditions, respectively. In order to investigate the structure-acoustic coupling effect, the numerical analysis has been performed according to the structure stiffness change of the water tank. The acoustic frequency response functions were compared with the numerical analysis and acoustic exciting test. From the results, the structural modal frequencies of the water-filled condition have been decreased compared to those of the dry condition in the low frequency range. The acoustic frequency response functions under the coupled boundary conditions showed different patterns from those under the ideal boundary conditions such as the pressure release and rigid boundary condition, respectively.

• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.161-167
• /
• 2022

낮은 수심에 있는 수중보를 통과하는 해양파 문제는 수심이 낮아지면서 발생하는 Shoaling 효과, 이로 인한 비선형파의 간섭효과, 그리고 수중보를 통과한 후 수심이 다시 깊어지면서 발생하는 파주기 별 분산효과 등을 복합적으로 포함하고 있다. 따라서, 이 문제는 해양파의 이론적 접근이나 CFD의 유효성을 검증하는 좋은 사례로 많이 활용되고 있는데, 주로 규칙파에 대해서 시간영역에서의 파형변화를 수조실험 결과와 비교하여 분석한다. 본고에서는 주파수 영역에서의 에너지 스펙트럼 변화를 분석하여, OpenFOAM 등의 CFD를 적용함에 있어서 초기위상조건 등 별다른 제약이 없는지, 비선형파의 간섭효과로 인한 배음 주파수 간의 에너지 교환이 나타나는지 등을 연구하였다.

• 한국해양공학회지
• /
• 제28권5호
• /
• pp.429-439
• /
• 2014

The target echoes contain information on the target such as the orientation, kinematics, and internal structure, as well as the external geometrical shape of the target. In addition, the pattern of the target echoes depends on the arrangement of the transmitters and receivers in space. Therefore, the study of the target echoes in a multi-static SONAR system can be useful for detecting and tracking submerged objects using an underwater surveillance system. For this purpose, an acoustic measuring system for multi-static target echoes was designed and tested in an acoustic water tank. Some preliminary data are presented and discussed.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.141-147
• /
• 2016

Underwater cavitation is one of the most important issues because it causes not only vibration and erosion of submerged bodies but also significant flow noise problems. In this paper, flow noise due to cavitation flows around the NACA66 MOD hydrofoil is numerically investigated. The cavitation flow simulation is conducted using the Reynolds-Averaged Navier-Stokes equations based on finite difference methods. To capture the cavitation phenomena accurately and effectively, the homogeneous mixture model with the Merkle's cavitation model is applied. The predicted results are compared with available experimental data in terms of pressure coefficients and volume fraction, which confirms the validity of numerical results. Based on flow field analysis results, hydro-acoustic noise field due to the cavitation flow is predicted using the Ffowcs-Williams and Hawkings equation derived from the Lighthill's acoustic analogy. The typical lift dipole propagation patterns are identified.