• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.51-58
• /
• 1999

The dimensional properties on polyester warp knitted fabrics with various lengths of underlap were studied. The results indicated that loop density increased with decreasing loop length and loop density of satin warp knitted fabric are a little higher than that of reverse satin warp knitted fabrics at a constant loop length. As the distance of underlap becomes shorter, the weight per unit area and thickness increases, the bulkiness decreases and the shrinkage of knitted fabrics become larger toward wale in satin warp knitted fabric and toward the course in reverse satin warp knitted fabric.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권4호
• /
• pp.265-275
• /
• 2010

In this work, reliable methodology for device design is presented. Based on this method, the underlap length has been optimized for minimizing the gateinduced drain leakage (GIDL) in a 22-nm node 4-terminal (4-T) silicon-on-insulator (SOI) fin-shaped field effect transistor (FinFET) by TCAD simulation. In order to examine the effects of underlap length on GIDL more realistically, doping profile of the source and drain (S/D) junctions, carrier lifetimes, and the parameters for a band-to-band tunneling (BTBT) model have been experimentally extracted from the devices of 90-nm channel length as well as pnjunction test element groups (TEGs). It was confirmed that the underlap length should be near 15 nm to suppress GIDL effectively for reliable low standby power (LSTP) operation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권3호
• /
• pp.136-147
• /
• 2009

In this paper we analyze the influence of source/drain (S/D) extension region design for minimizing short channel effects (SCEs) in 25 nm gate length single and double gate Silicon-on-Insulator (SOI) and Germanium-on-Insulator (GOI) MOSFETs. A design methodology, by evaluatingm the ratio of the effective channel length to the natural length for the different devices (single or double gate FETs) and technology (SOI or GOI), is proposed to minimize short channel effects (SCEs). The optimization of non-overlapped gate-source/drain i.e. underlap channel architecture is extremely useful to limit the degradation in SCEs caused by the high permittivity channel materials like Germanium as compared to that exhibited in Silicon based devices. Subthreshold slope and Drain Induced Barrier Lowering results show that steeper S/D gradients along with wider spacer regions are needed to suppress SCEs in GOI single/double gate devices as compared to Silicon based MOSFETs. A design criterion is developed to evaluate the minimum spacer width associated with underlap channel design to limit SCEs in SOI/GOI MOSFETs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.482-491
• /
• 2012

In the present work, comprehensive investigation of the ambipolar characteristics of two silicon (Si) tunnel field-effect transistor (TFET) architectures (i.e. p-i-n and p-n-p-n) has been carried out. The impact of architectural modifications such as heterogeneous gate (HG) dielectric, gate drain underlap (GDU) and asymmetric source/drain doping on the ambipolar behavior is quantified in terms of physical parameters proposed for ambipolarity characterization. Moreover, the impact on the miller capacitance is also taken into consideration since ambipolarity is directly related to reliable logic circuit operation and miller capacitance is related to circuit performance.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.450-453
• /
• 2014

쇼트키 장벽 모스펫(Schottky barrier MOSFETs : SB-MOSFETs)은 SB높이(${\Phi}_B$)에 매우 민감하다. 그래서 ${\Phi}_B$를 줄이는 공정 방법에 대한 연구가 활발히 진행 중이다. 이러한 ${\Phi}_B$를 측정할 때, SB-MOSFETs에서가 아닌 SB 다이오드에서 측정이 이뤄지고 있다. 본 논문에서는 ${\Phi}_B$를 SB-MOSFETs에서 측정 할 수 있는 방법을 제안하고 전산모사를 통하여 채널의 길이와 두께, Overlap / Underlap 구조, 온도 등에 대한 의존성을 살펴 보았다. 그 결과 채널의 길이와 두께, Overlap / Underlap 구조에 따른 의존성은 없는 것으로 확인되었다. 하지만 20nm 이하의 채널의 소자에 대해서는 소스/드레인간 터널링 전류로 인해 정확한 ${\Phi}_B$ 측정이 불가능하였다. 그리고 저온에서 측정할 때 정확도가 높아짐을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제45권10호
• /
• pp.15-22
• /
• 2008

기존의 MOSFET는 단채널 현상의 증가로 인하여 스케일링에 한계를 가지고 있다. Double-Gate MOSFET (DG-MOSFET)는 소자의 길이가 축소되면서 나타나는 단채널 현상을 효과적으로 제어하는 차세대 소자이다. DG-MOSFET으로 소자를 축소시키면 채널 길이가 10nm 이하에서 게이트 방향뿐만 아니라 소스와 드레인 방향에서도 양자 효과가 발생한다. 또한 게이트 길이가 매우 짧아지면 ballistic transport 현상이 발생한다. 따라서 본 연구에서는 2차원 양자 효과와 ballistic transport를 고려하여 DG-MOSFET의 특성을 분석하였다. 또한 단채널 효과를 줄이기 위해서 $t_{si}$와 underlap 그리고 lateral doping gradient를 이용하여 소자 구조를 최적화하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권6호
• /
• pp.293-302
• /
• 2015

Degraded data stability, weaker write ability, and increased leakage power consumption are the primary concerns in scaled static random-access memory (SRAM) circuits. Two new SRAM cells are proposed in this paper for achieving enhanced read data stability and lower leakage power consumption in memory circuits. The bitline access transistors are asymmetrically gate-underlapped in the proposed SRAM cells. The strengths of the asymmetric bitline access transistors are weakened during read operations and enhanced during write operations, as the direction of current flow is reversed. With the proposed hybrid asymmetric SRAM cells, the read data stability is enhanced by up to 71.6% and leakage power consumption is suppressed up to 15.5%, while displaying similar write voltage margin and maintaining identical silicon area as compared to the conventional memory cells in a 15 nm FinFET technology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권2호
• /
• pp.170-177
• /
• 2008

In the present work a methodology to minimize short channel effects (SCEs) by modulating the effective channel length is proposed to design 25 nm single and double gate-source/drain underlap MOSFETs. The analysis is based on the evaluation of the ratio of effective channel length to natural/ characteristic length. Our results show that for this ratio to be greater than 2, steeper source/drain doping gradients along with wider source/drain roll-off widths will be required for both devices. In order to enhance short channel immunity, the ratio of source/drain roll-off width to lateral straggle should be greater than 2 for a wide range of source/drain doping gradients.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.17-24
• /
• 2000

The tensile properties of polyester warp knitted fabrics of satin and reverse satin structure with various lengths of underlap were studied. In the range of low tension, the satin warp knitted fabric showed larger tensile energy and elongation in the direction of $0^\circ$ and larger tensile linearity, tensile resilience and initial modulus in $90^\circ$. Meanwhile, reverse satin one showed larger initial moduli in 0$^{\circ}$ and larger the others in $90^\circ$. In the range of high tension, the tendencies of both fabrics in $0^\circ$ direction were almost the same as those in all direction. As the under laps were shorter for both fabrics, tensile linearity, tensile energy and elongation increased, but tensile resilience decreased in all directions. However initial moduli were changed little.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.372-375
• /
• 2017

Metal-oxide-semiconductor Field-Effect transistor (MOSFET)을 대체할 기술로서 제안된 Schottky Barrier MOSFET (SB-MOSFET)가 제시되고 있다. 본 연구에서는 SB-MOSFET와 MOSFET을 다양한 소자 파라미터를 변화시킴으로서 양자역학적 전하수송 계산을 바탕으로 특성을 분석한다. MOSFET과 SB-MOSFET은 채널 두께 ($T_{Si}$)가 감소함에 따라 전류량은 증가하고 SS와 DIBL은 증가하였고 Overlap에서는 SS와 DIBL이 커지고 Underlap에서는 작아짐을 보였고 SB-MOSFET는 특히 그 폭이 컸다. 또한 SB 높이가 낮을수록 SB-MOSFET의 전류량이 증가하고 SS는 감소하였고 마찬가지로 Source와 Drain doping concentration이 낮을수록 MOSFET의 전류량은 증가하고 SS는 감소하였다. MOSFET과 SB-MOSFET의 경향은 대체로 비슷하나 변화량의 차이 등이 있었다.