• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.512-514
• /
• 2002

우리나라의 지중배전선로는 가공선의 정비 차원에서 지중케이블로 공급함으로써 시작되었으며, 지금은 변전소 인출개소와 택지개발 지역에 신규공급용으로 주로 설치되고 있다. 지중배전선로는 매년 약 7%의 증가율을 보여주고 있으며 2001년말 기준으로 케이블긍장이 16,301(C-km)로 약9.4%의 지중화율을 나타내고 있다. 선로가 증가함에 따라 고장의 발생이 광역정전등 점차 많은 문제점을 내포하고 있다. 지중배전선로의 고장은 주로 케이블에서의 외상과 열화가 주요인으로 이는 환경적인 영향과 제작 시공 및 유지관리면에서의 미흡에 의한 것으로 효과적인 관리를 위해서는 지하매설물종합관리기관 설립 등의 제도적 도입과 선로제작과 시공품질의 향상을 유도하기 위한 계약 제도의 보완 및 선로의 중요도와 경제성에 따른 차별화된 관리 방법과 선로고장시 정확한 data 보고관리의 여건 마련과 아울러 정확한 선로 이력 database화 등의 체계적인 선진 예방보수 기법의 도입이 요구된다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.151-152
• /
• 2008

배전선로 지중화에 경험이 많이 있는 유럽 전력회사의 지중 운영사례와 최근 공급신뢰도 향상을 위해 지중계통의 다양한 구성방법을 모색하고 있는 미국의 Con-Edison사의 차세대 계통 구성 프로젝트 등 북미, 일본의 계통 구성방식과 설비운영 실태를 조사하였다. 국외 전력사에서는 환경적인 요인과 안전을 위해 지중화 및 기자재 개선에 많은 노력을 기울이고 있으며, 특히 오염물 퇴적과 변압기 과부하 감시기능을 부가한 지하볼트, 직접매설형 변압기, 벽면거치형 스위치 등 새로운 설계개념을 도입하고 있었다.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.3
• /
• pp.146-151
• /
• 2004

The most widely used primary protection for the internal fault detection of the power transformer is current ratio differential relaying (CRDR) with harmonic restraint. However, the second harmonic component could be decreased by magnetizing inrush when there have been changes to the material of the iron core or its design methodology. The higher the capacitance of the high voltage status and underground distribution, the more the differential current includes the second harmonic during the occurrence of an internal fault. Therefore, the conventional second harmonic restraint CRDR must be modified. This paper proposes a numerical algorithm for enhanced power transformer protection. This algorithm enables a clear distinction regarding internal faults as well as magnetizing inrush and steady state. It does this by analyzing the RMS fluctuation of terminal voltage, instantaneous value of the differential current, RMS changes, harmonic component analysis of differential current, and analysis of flux-differential slope characteristics. Based on the results of testing with WatATP99 simulation data, the proposed algorithm demonstrated more rapid and reliable performance.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.461-463
• /
• 2003

우리나라에서 현재 적용중인 배전용 지중케이블은 1973년 처음 도입되어 도시의 중심 번화가와 변전소 인출개소 및 신도시 택지개발 지역 둥에 주로 설치되어 현재는 약 17,231 C-km (2002.12말 기준)에 이르고 있다. '86 아시안 게임과 '88 서울올림픽을 대비해 설치했던 케이블들은 설치 당시의 열악한 제작, 시공 및 관리 기술의 부족으로 많은 문제점을 가지고 있다. 이런 불량케이블이나 20년 이상된 노후케이블의 절연상태를 파악하기 위해 현재 적용 기준으로 되어있는 등온완화전류법을 이용한 열화진단장비를 현장에 적용해 보고 사례를 분석해보므로써 이 장비의 문제점과 향후 개선방향을 모색해 보았다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.429-433
• /
• 2004

Most utiltity systems are subject to frequent changes, often due to increased loads and demand to up-grade quality of service provided. Urban renewal, expressway construction and suburban growth have also caused significant changes in urban utility distribution systems. Recently, it is required that a guideline for planning of a complete system, the reasonable design and construction methods for the efficient installation common utility tunnels must be estabilished. It prompts drastic measures to guard cities and their inhabitants against the horror of massive fires in the future. Preparedness holds the key to safety.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.47-48
• /
• 2014

Non-destructive technique to measure internal structure and constant distribution of material can be widely used to exploration of mineral resources, identification of underground cables and buried pipelines, and diagnostic imaging in medical area. In this paper, inverse scattering solution based on 2-dimensional EM scattering problem should be considered and formulated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.559-562
• /
• 2017

In city, tracing of power transmission lines is difficult due to compound installation of overhead and underground lines, transposition, bad view caused by trees or big buildings. It is hard problem for electrical technician on site to trace power transformers or power lines to serve customers in 3 phase -4 wires power distribution systems. It is necessary that the correct and fast tracing method is required for load balancing among distribution lines. Old technology use to trace off-lines with high power impulse injection. Our proposed method use to trace live lines with very small power high frequency signal injection. Typical power transformers in the distribution system prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the power transformer to serve customers. Two end communication terminals are required to be synchronized between them for determination on electrically same phases. Challenging issue is to achieve synchronization without GPS providing synchronizing time. A novel power transformer and wire identification system is designed and implemented. The system consists of a transmitter and a receiver with power-line communication module. Some experiments are conducted to verify the theoretical concepts in a big commercial building. Also some simulations are done to help and understand the concepts by using MATLAB Simulink simulator.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.8
• /
• pp.620-626
• /
• 2006

Recently, indoor air quality (IAQ) is one of the greatest problems in our modern societies. Although research for IAQ is made rapid progress but IAQ problems concerning in door microorganism contamination is required to be studied still more. So we have investigated the indoor microorganism concentration of a variety of department store, subway station, underground shopping center, kindergartens, library where people complain about the in-door air quality. The experiment on microorganism concentration of indoor air was carried out and the average of total microorganisms was measured. Comparing the experimental results with existing foreign criterion, the experimental results show that the ministry of environment recommendation microorganism concentration value ($800 CFU/m^3$) is in need of revision in the near future.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1774-1777
• /
• 1996

In this paper, applicability of SI-PD(switching impulse - partial discharge) testing method was put on an attempt as a newly proposed diagnostic method for the underground distribution power cable system in Korea. For this purpose, SI-PD testing equipment was designed, and tests were performed using artificial needle-type defects integrated into the 22.9 kV CN/CV cables in drder to prove its reliability. As a result, arc noises, generated from spark gap, were considerably decreased by use of a pneumatic switch immersed into oil, and artificial needle-type defects were well detected with impulse voltage level under $2U_0$. These results imply that it is likely possible to apply SI-PD measurement method as a the nondistructive test for the 22.9 kV CN/CV cable system in Korea.

• Geomechanics and Engineering
• /
• v.24 no.1
• /
• pp.1-14
• /
• 2021

In this study, a new approach using electrical resistivity measurement was proposed to detect grout penetration and to evaluate the grouting performance for such as waterproof efficiency in single rock fracture. For this purpose, an electrical resistivity monitoring system was designed to collect multi-channel data in real time. This was applied to a system for grout injection/penetration using a transparent fracture replica with various aperture sizes and water-cement mix ratio. The electrical resistivity was measured under various grout penetration conditions in real time, which results were directly compared to the visual observation images of grout penetration/distribution. Moreover, the grouting success status after the curing process was evaluated by measuring the electrical resistivity in relation to changes in frequency in fracture cells where grout injection and penetration were completed. Consequently, it was determined that the electrical resistivity monitoring system could be applied effectively to the detection of successful penetration of grouting into a target area and to actual field evaluation of the grouting performance and long-term stability of underground rock structures.