• 한국터널지하공간학회 논문집
• /
• 제6권2호
• /
• pp.161-169
• /
• 2004

본 연구는 터널 모형실험을 실시함에 있어서 실제 지반상태 및 터널구조물을 모형실험상에서 모사하기 위한 상사성 원리를 종합적으로 검토한 것이다. 이를 바탕으로 중력장에서 모형실험을 실시하는 경우에도 상사성을 만족시킬 수 있는 방법에 대해 이론적 연구를 수행하였으며 토사지반에 시공된 터널 사례에 대하여 모형실험시 라이닝 설정 방법에 관한 실험조건 수립과정을 정리하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1057-1059
• /
• 1999

Recently, increased demand of electrical energy caused additional installation of underground power cable, Industrialization of metro makes civil works difficult. So installed ducts became a key of underground power transmission, LG cable set to work development of high stress cable. LG cable stated in 1996, got a certificate of type test in 1998, and applied at domestic site in Nov. 1999. High stress cable has some merit, decrease of civil cost, reduction of work time, by reason of decrease of dia. and weight, and economical system design, so LG cable has a good merit in comparison with competitive company in domestic and foreign market.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.9-13
• /
• 2009

Recently, construction in downtown is often done closely at the adjacent building. In this case, underground construction need to Basement Composite Wall(BCW) construction. However, generally, during the construction process of BCW form works have many problems that are narrow working space and inefficient time consuming. Despite of these problems, there was no quantitative research for the work time of BCM assembly. Therefore, in this study, work time of CBW form assembly in underground construction is identified by the work analysis. The results of this study reveal that buttress work of basement form take lots of time in the entire work process of Basement Composite Wall form assembly.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.52-56
• /
• 2001

Experiments of 2 type on insulating compounds accomplished to change PVC using in URD(Underground) power cable jacketing. one was DB(Dielectric Breakdown) test on the pure base resins and the others were WVT(Water Vapor Transmission) test on the compounds which contained C/B(Carbon Black), anti-oxidant to base resin. a kind of specimens made by pressing to resin of pellet or lump form was HDPE(High Density Polyethylene), MDPE(Medium Density Polyehylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC(Polyvinyl Chloride). As a results of AC DB and WVT test, we saw that strength of Insulation was HDPE> LLDPE = MDP E> LDPE and WVT ratio was HDPE

• 터널과지하공간
• /
• 제6권1호
• /
• pp.10-18
• /
• 1996

Arched openings are generally excavated in underground construction works. Since stress distribution around openings depends on geological structure in rock mass, any shape of arched openings fully conformed with in-situ stress condition should be recommended to maintain mechanical safety of structures. Shape of arched openings is specified by both roof curvature and height-width ratio, and especially this report presents deformation behaviors related with roof curvature. Scale model tests and numerical studies of various shaped openings are conducted, where rectangular opening shows the greatest convergence. Through the anlayses of various arched opengings, as radius of roof curvature is increased, roof lowering and sidewall closure are remarkably increased, whereas floor heaving is increased little by little. By the way, it is useful that displacements of openings are roughly estimated in the stage of preliminary investigation. To find out elastic displacements of arched openings with any roof curvature, regressional formula and charts by least square method are represented. In addition elastoplastic deformation behavoirs of arched openings concerning associated adn non-associated flow rule are discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.903-909
• /
• 2001

Apartment and large residence buildings are necessary to ensure a comfortable noise/vibration environment. So. it must be performed a anti-vibration/noise evaluation at early design stage, such as utility room arrangement, machinery installation method and so on. In this paper. environment noise status on problem areas, which was issued by resident. was investigated to understand the noise transmission property generated from underground machinery room and to device a optimized countermeasure in order to enhance noise environment. Also, the measured noise levels before and after modification works are compared to confirm the effectiveness of proposed countermeasure.

• Spatial Information Research
• /
• 제18권4호
• /
• pp.23-32
• /
• 2010

상수도 시설물은 노사 인프라를 구성하는 필수적인 요소이다. 이러한 상수도 지하시설물을 체계적이고 과학적으로 관리하기 위하여 상수도 GIS를 구축하였으며, 이러한 상수도 GIS 구축을 위해서는 지하에 매설된 상수도 시설물을 정확히 탐사하여 DB를 구축하여야 한다. 본 연구에서는 상수도 지하시설물에 대한 탐사율 재고방안을 모색하기 위하여 통계적인 자료를 동하여 탐사율 저하 원인을 분석하고, 서울시 상수도 GIS의 사례 조사를 통하여 탐사에 대한 표준화 방안을 제시하였다. 연구결과 상수도 지하시설물 측량 시 비금속 관로는 탐사 결과가 불확실하고 공공측량 성과심사를 받기가 어렵기 때문에 탐사를 하지 않고 있으며, 탐사에 대한 표준 작업규정이 없어 체계적인 탐사를 시행하지 못하고 있는 것으로 조사되었는데, 이 두 가지 요인이 탐사율 저하의 주요 원인으로 파악되었다. 본 연구를 통하여 상수도 지하시설물 탐사에 대한 업무 표준화 방안용 제시하였으므로 탐사 작업 시 체계적인 탐사가 가능하여 탐사율을 향상시킬 수 있을 것으로 판단되며, 탐사율 제고를 위한 정책 제안으로 비금속 관로에 대한 효과적인 성과심사 방안을 제시하고, 공공측량 작업규정을 보완할 탐사관련 사항을 체계적으로 기술하였다.

• 한국측량학회지
• /
• 제40권4호
• /
• pp.343-350
• /
• 2022

우리나라에 지하시설물 전산화사업이 본격적으로 추진된 것은 1994년 12월 서울 북아현동 도시가스 폭발 사고에 이어 1995년 4월 대구 지하철 폭발 사고 이후부터이며, 이와 같은 대형 가스 폭발 사고로 인해 인명 피해와 잠재적 편익을 포함한 막대한 경제적 손실이 발생함에 따라 지하시설물의 효율적인 관리를 위한 전산화 필요성이 사회적으로 크게 부각되었다. 우리나라는 국가지리정보체계 구축 기본계획에 따라 지하시설물에 대한 전산화를 수행하고 있지만 지하시설물 정보의 관리 및 활용 확산을 위해서는 지하시설물 데이터의 품질등급에 대한 제도적 개선이 필요한 실정이다. 본 연구에서는 지하시설물 정보 구축 및 관리 현황과 법령 및 규정 조사를 바탕으로 문제점을 파악하고, 지하시설물 정보의 품질등급 정립을 위한 방향을 제시하였다. 또한 실제 건설공사에 지하시설물 품질등급 정보가 연계 활용될 수 있도록 「공공측량 작업규정」과 설계기준, 표준시방서, 전문시방서 등 건설공사기준과 가스기술기준, 전기설비 및 정보통신공사의 설계기준 및 표준시방서의 연계성을 조사하여 지하시설물 품질등급 정보의 활용이 가능한 대상을 도출하고 건설기준 개정안을 제시하였다. 향후, 지하시설물의 품질등급이 확립된다면 건설 분야에서 지하시설물 품질등급 정보의 활용도를 높이고, 현장 적용에 있어서 정확도를 향상시킬 수 있을 것으로 기대된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.123-127
• /
• 2008

As buildings becoming higher and more enormous the portion of steel works has been increased, which makes the schedule planning and management more significant. However, in actual construction sites, management is more based on a manager's construction experience than productivity data accumulated in previous projects. Moreover, most of the existing studies also featured a theoretical approach rather than an analysis of data straightforwardly collected in sites. In this study, a steel-erection site was visited to collect productivity data. The study found that there were significant disparities between aboveground work productivity and underground work. However, the productivities of 'first node on ground' and 'second node on ground' were estimated similar. The productivity data collected and factors affecting the productivity will help managers to plan and control their similar steel-erection works. This study will also be beneficial for those performing related studies.

• 터널과지하공간
• /
• 제4권3호
• /
• pp.287-296
• /
• 1994

Safety-related structures of power plants have to be protected against the effects of possible hazards and natural phenomena. Earthquakes are considered a major dynamic design loading as a requirement of plant design, but the effects of blast-induced vibratons are not. Due to the difficulties of obtaining construction site for new plants, following ones are inevitably being built in the site adjacent to existing power plants. Therefore considerable thought has been recently given to the dynamic loading generated by blasting works near the plants. In this paper, discussed is applicability of existing vibration standards and industrial codes to the blasting works near safety related structures. Also evaluated are the parameters for the safe vibration limits such as measure of vibration level, frequency consideration, structure response, propagation equation, etc.