• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.51-57
• /
• 2011

The lightweight and compact actuator with high power is required to perform motion with multiple degrees of freedom. To reduce the size and inertia of a robot manipulator, the mechanical transmission system is used. The shape memory alloy(SMA) is similar to the muscle-tendon-bone network of a human hand. However, there are some drawback and nonlinearity, such as the hysteresis and the stress dependence. In this paper, the design of the underactuated robot hand is studied. The 3-finger dexterous hand is driven by the SMA actuator using segmental mechanism. This digital approach enables to overcome the nonlinearity of SMA wire. The translational displacement of SMA actuator required to bend a phalanx of the underactuated robot hand is estimated and the bending angle of the underactuated robot hand according to input displacement of SMA actuator is predicted by the multi-body dynamic analysis.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.858-863
• /
• 2004

In this study, the new prosthetic hand which can perform sensory feedback is developed. Although the continuous development of current prosthetic hands, they have some drawbacks. The drawbacks are the low grasping capabilities, the lack of sensory information given to the user, and so on. Despite the improvement of the function of fingers, the sensory information problem still remains undeveloped. By using differential gear and underactuated mechanical design, it can be solved with the minimum additional weight. And it will be applied to all of the prosthetic hands.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.4
• /
• pp.432-438
• /
• 2002

In this paper, we described a technique for the swing-up control of a 2 link acrobat robot using a cannonical form which is derived form the law of conservation of an angular momentum based on the center of the first joint. The wide usefulness of the canonical form of the acrobat robot, which was suggested here, is could also be applied to control a free flying robot or an underactuated planar manipulator with no gravity term. Some simulation results are provided to verify the effectiveness of the proposed algorithm

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.843-849
• /
• 2016

It has been shown that the adaptive grasp feature can be implemented by underactuated robotic hands with a minimal number of actuators. Following this approach, a new design of prosthetic hand is presented. A method is proposed for evaluating grasp performance using cylinders, spheres, and square bars of various sizes. The effects of the major design parameters were investigated experimentally and an improved design is proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.415-420
• /
• 2017

Underactuated prosthetic hands are relatively light and economical. In this work, an economical grasping force control system is proposed for underactuated prosthetic hands with adaptive grasp capability. The prosthetic hand is driven by a main cable based on a set of electromyography sensors on the forearm of a user. Part of the main cable tension related to grasping force is fed back to the user by a skin-mounted vibrator. The proper relationship between the grasping force and the vibrator drive voltage was established and prototype tests were performed on a group of users. Relatively accurate grasping force control was achieved with minimal training of users.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.193-204
• /
• 2016

This paper presents an anthropomorphic finger prosthesis for amputees whose proximal phalanx is mutilated. The finger prosthesis to be proposed is able to make the amputees to perform the natural motion such as flexion/extension as well as self-adaptive grasping motion as if normal human finger does. The mechanism of finger prosthesis with three degrees-of-freedom (DOFs) consists of two five-bar and one four-bar linkages. Two passive components composed of torsional spring and mechanical stopper and only one active joint are employed in order to realize an underactuation. Each passive component is installed into the five-bar linkage. In order to activate the finger prosthesis, it is required for the user to flex and extend the remaining proximal phalanx on the metacarpophalangeal (MCP) joint, not an electric motor. Thus the finger prosthesis conducts not only the natural motion according to his/her intention but also the grasping motion through the deformation of springs by the object for human finger-like behavior. In order to reveal the operation principle of the proposed mechanism, kinematic analysis is performed for the linkage design. Finally both simulations and experiments are conducted in order to reveal the design feasibility of the proposed finger mechanism.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1405-1411
• /
• 2012

Remote handling manipulators are widely used for performing hazardous tasks, and it is essential to ensure the reliable performance of such systems. Toward this end, tendon-driven mechanisms are adopted in such systems to reduce the weight of the distal parts of the manipulator while maintaining the handling performance. In this study, several approaches for the design of a gripper system for a tendon-driven remote handling system are introduced. Basically, this gripper has an underactuated spring mechanism that is combined with a slave manipulator triggered by a master operator. Based on the requirements under the specified tendon-driven mechanism, the connecting position of the spring system on the gripper mechanism and kinematic influence coefficient (KIC) analysis are performed. As a result, a suitable combination of components for the proper design of the target system is presented and verified.