Jo, So-Young;Hur, Jung-A;Kim, Kyung-Hwan;Lee, Tae-Wan;Shin, Ji-Cheol;Hwang, Kyung-Seok;Chin, Byung-Doo;Choi, Dong-Hoon
Bulletin of the Korean Chemical Society
/
제33권9호
/
pp.3061-3070
/
2012
Novel 2-hexylthieno[3,2-b]thiophene-containing conjugated molecules have been synthesized via a reduction reaction using tin chloride in an acidic medium. They exhibited good solubility in common organic solvents and good self-film and crystal-forming properties. The single-crystalline objects were fabricated by a solvent slow diffusion process and then were employed for fabricating field-effect transistors (FETs) along with thinfilm transistors (TFTs). TFTs made of 5 and 6 exhibited carrier mobility as high as 0.10-0.15 $cm^2V^{-1}s^{-1}$. The single-crystal-based FET made of 6 showed 0.70 $cm^2V^{-1}s^{-1}$ which was relatively higher than that of the 5-based FET (${\mu}=0.23cm^2V^{-1}s^{-1}$). In addition, we fabricated organic photovoltaic (OPV) cells with new 2-hexylthieno [3,2-b]thiophene-containing conjugated molecules and methanofullerene [6,6]-phenyl C61-butyric acid methyl ester ($PC_{61}BM$) without thermal annealing. The ternary system for a bulk heterojunction (BHJ) OPV cell was elaborated using $PC_{61}BM$ and two p-type conjugated molecules such as 5 and 7 for modulating the molecular energy levels. As a result, the OPV cell containing 5, 7, and $PC_{61}BM$ had improved results with an open-circuit voltage of 0.90 V, a short-circuit current density of 2.83 $mA/cm^2$, and a fill factor of 0.31, offering an overall power conversion efficiency (PCE) of 0.78%, which was larger than those of the devices made of only molecule 5 (${\eta}$~0.67%) or 7 (${\eta}$~0.46%) with $PC_{61}BM$ under identical weight compositions.
구미시 황상동에 위치한 마애여래입상 (보물 제 1122 호)의 구성 암석은 흑운모-각섬석 화강섬록암으로서 약 30 여 개의 불연속적 동일 암체로 구성되어 있으나, 보관석은 역질 사암이다. 마애불 주변에 노출된 암괴의 대부분은 $N25{\sim}45^{\circ}W$의 주향과 거의 수직($70{\sim}85^{\circ}SE$)에 가까운 배면경사를 갖는 절리들이 발달되어 있다. 마애불 본체의 암괴들은 균열된 채 서로를 지지하고 있으나, 접합점에서는 심한 기계적 및 화학적 풍화를 받아 붕괴위험에 쳐해 있다. 또한 상부와 배면으로부터 발생하는 토압과 응력에 의하여 본체는 전면으로 두상은 좌측으로 기울어져 있다. 이 마애불을 이루는 암석의 풍화등급은 HW에 속하며, 조암 광물의 대부분은 화학적 및 광물학적 풍화에 의하여 점토 광물과 철수산화 광물로 교대되어 있다. 마애불의 표면에는 지의류와 선태류가 서식하고 있으며 모근과 포자류가 암석의 생물학적 풍화를 촉진시키고 있고, 절리대에는 이미 토양화가 진행되어 잡초가 서식하고 있다. 보존과학적 측면에서 볼 때, 이 마애불의 구조적 안정을 위해서는 불안정한 암괴의 제거가 필수적이며 불균형의 재발생과 마애불의 전면으로 작용하는 응력을 최소화하기 위하여 암석 지지공법에 의한 본체의 지보가 필요하다. 균열이 심한 절리면에는 암석용 충진제를 사용하여 수경화 처리가 선행되어야 할 것으로 보이며, 마애불에 미치는 지면의 습도를 저감하기 위한 차수벽 또는 차단막의 설치도 고려되어야 할 것이다. 또한 표면에 피복된 지의류와 토양화가 진행된 불연속면에 서식하는 잡초를 제거하기 위한 생화학적 처리가 필요하다.
Bifacial and semitransparent hydrogenated amorphous silicon (a-Si:H) thin-film solar cells in p-i-n configuration were prepared with front and rear transparent conducting oxide (TCO) electrodes using plasma-enhanced chemical vapor deposition method. Fluorine-doped tin oxide and tin-doped indium oxide films were used as front and rear TCO contacts, respectively. Film thickness of intrinsic a-Si:H absorber layers were controlled from 150 nm to 450 nm by changing deposition time. The dependence of performance characteristics of solar cells on the front and rear illumination direction were investigated. For front illumination, gradual increase in the short-circuit current density (JSC) from 10.59 mA/㎠ to 14.19 mA/㎠ was obtained, whereas slight decreases from 0.83 V to 0.81 V for the open-circuit voltage (VOC) and from 68.43% to 65.75% for fill factor (FF) were observed. The average optical transmittance in the wavelength region of 380 ~ 780 nm of the solar cells decreased gradually from 22.76% to 15.67% as the absorber thickness was changed from 150 nm to 450 nm. In case of the solar cells under rear illumination condition, the JSC increased from 10.81 to 12.64 mA/㎠ and the FF deceased from 66.63% to 61.85%, while the VOC values were maintained at 0.80 V with increasing the absorber thickness from 150 nm to 450 nm. By optimizing the deposition parameters, a high-quality bifacial and semitransparent a-Si:H solar cell with 350 nm-thick i-a-Si:H absorber layer exhibited the conversion efficiencies of 7.69% for front illumination and 6.40% for rear illumination, and average visible optical transmittance of 17.20%.
H-pile과 목재 토류판을 사용하는 흙막이 공법은 오랜 기간 굴착공사에서 사용되어 온 공법이지만 H-pile 사이의 간격이 일정치 않아 규격화된 목재를 절단하거나 덧대기 공정이 추가되는 문제점이 있다. 또한, 시방규정상 3회 재사용을 위한 목재 회수시 안전사고의 위험이 따르게 되며 이러한 이유로 목재를 회수치 않고 지중에 매몰하여 여러 차례 방송매체의 지적을 받은 바 있다. 이 연구에서는 이상의 문제점을 보완하기 위하여 기존의 목재 토류판을 대신하여 강재 요소를 적용하는 방안을 제시하였다. 강재 흙막이 구조체는 자유 확폭과 개별 흙막이 구조체를 연결하는 커넥터를 통해 시공 편의성 및 재활용을 위한 회수가 가능한 것이 특징이다. 또한, 해체 시 커넥터를 통한 구조체간의 연결성으로 지중인력투입없이 해체가 가능하다. 이러한 흙막이 구조체의 강도특성을 분석하기 위해 UTM장비를 사용하여 휨 강성시험, 반복 사용의 능력을 확인하기위한 피로 강도시험, 그리고, 흙막이 구조체의 회수 시 연결부 구조체의 성능을 확인하기위한 인장 강도시험을 수행하였다. 또한, 장점으로 부각된 내용이 현장에서 실제 가능한지 여부를 확인하기 위한 현장시험과 다양한 지반조건에 따른 수치해석을 통해 현장 적용성을 평가하였다. 연구결과, 구조적 특성뿐만 아니라 설치 및 해체시의 시공 편의성이 매우 탁월한 것으로 나타났으며 향후 구조체의 재사용과 함께 시공 경제성 증진에도 크게 기여할 것으로 판단된다. 특히, 다단굴착시 굴착배면에 흙막이 구조체가 밀착되어 설치가 가능한 점은 기존 공법에서 지적되어 온 배면지반의 뒷채움 불량이 발생할 여지가 없어 시공 및 시공 후 시설물의 안전성 증진에 크게 기여할 수 있을 것으로 판단된다.
눈동자개, Pseudobagrus koreanus의 성분화 과정을 밝히기 위해 부화 직후부터 250일령까지 생식소의 분화 및 발달을 조사하였다. 원시생식세포는 부화 후 1일(전장: $6.63{\sim}6.95\;mm$)에 나타났으며, 부화 후 5일($7.50{\sim}9.36\;mm$)에 생식융기를 형성하는 원시생식소 구조를 나타내었다. 부화 후 25일($11.58{\sim}13.21\;mm$)에서는 생식소 후단부 한쪽 끝에서 신장된 체세포 돌기가 생식소와 융합되어 작은 난소강이 형성되었다. 부화 후 30일($12.19{\sim}13.72\;mm$)에는 생식소 하단부에 정소관 원기가 출현하여 정소의 분화가 시작되었다. 부화 후 50일째 자어($16.28{\sim}17.06\;mm$)의 난소내에서는 주변인기 난모세포로 채워지기 시작하였으며, 정소내에서는 정원세포(spermatogonia, SG)의 활발한 증식을 관찰할 수 있었다. 부화 후 250일째 자어($35.49{\sim}51.12\;mm$)에서는 난소의 크기가 더욱 커지고 난모세포들로 가득 채워져 있었고, 정원세포의 수가 증가하기 시작하였다. 이상의 결과 눈동자개의 성분화 양상은 자웅이체형 중 분화형이었다.
시간에 따라 변화하는 네트워크 상황을 반영하는 통행배분 연구가 활발히 진행되고 있다. 이러한 연구의 배경에는 통행배분 모델이 도로망 계획이라고 하는 하드웨어 분야의 계획에만 그치지 않고 교통관리나 제어라고 하는 소프트웨어 분야의 계획에도 활용하고자 하는 사회적 필요성의 증가 때문이다. 또한, 통행배분 모형의 이론과 현실 사이의 괴리를 줄이고자 하는 차원에서 연구되고 있는 모형으로 다중계층 통행배분 모형이 있다. 이 모형은 다중 운전자 계층과 다차종 계층으로 구분되며 이중에서 동적모형과 결합될 수 있는 보다 현실성 있는 분야는 다차종 분야이다. 이러한 배경에서 본 연구의 목적은 이 두 분야를 결합한 다차종 동적 통행배분 모형을 구축하고자 한다. 이것은 동적 이용자 균형 배분 모형이 현재 이슈화 되고 있는 첨단교통체계(ITS)의 이론적 지주가 되고 있으며 따라서 이러한 동적모형을 다중계층 모형과 결합시킴으로써 보다 현실성 있는 동적 모형이 구축될 수 있을 것으로 기대되기 때문이다. 그렇지만 다수의 차종을 고려하게 되는 경우 기존의 동적 배분 모형의 구축을 위하여 필요한 FIFO가 위반된다. 이것은 FIFO 제약 조건하에 구축되는 기존의 동적 배분 모델링 방법으로는 다차종 동적모형의 구축이 불가능함을 의미한다. 따라서 본 연구에서는 FIFO 제약조건을 완화 시킬 수 있는 동적 네트워크의 모형을 구축하였으며 동시에 기존의 네트워크 부화 기법의 하나인 시뮬래이션 기법을 수정하여 본 연구의 모형에 적용될 수 있도록 고안하였다. 또한 해법(알고리즘) 분야오 기존의 최단경로 산정 알고리즘을 수정한 시간종속적인 최단경로 알고리즘과, 기존의 MSA를 수정한 알고리즘도 구축하였다. 이렇게 구축된 모형과 알고리즘을 격자형 격자형 네트워크에 적용하여 동적이용자 균형해를 산정하여 구축된 알고리즘의 수렴성을 검증하였다.
내진 보강용 이력 댐퍼로 활용하기 위해 개발된 좌굴방지가새는 일본과 미국을 중심으로 활발히 연구되어 왔다. 좌굴방지가새는 일반적으로 심재와 외피 사이를 콘크리트 등으로 채워 제작된다. 좌굴방지가새에 콘크리트를 채우는 일은 습식 공정으로 제작 효율을 떨어뜨릴 수 있는 하나의 원인으로 심재와 콘크리트의 비부착 처리는 쉽지 않은 작업이다. 이를 개선하기 위해 반원형 스프링으로 심재를 횡지지하는 건식형 좌굴방지가새를 제안하였다. 건식형 좌굴방지가새를 실용화하기 위해 적절한 거동을 갖는 반원형 스프링의 형상을 해석적으로 조사하였다. 심재가 압축을 받아 고차모드로 좌굴하기 위해 필요로 하는 횡지지 강성과 강도를 이론적으로 평가하였다. 또한 실제 적용 조건을 반영하여 반원형 스프링의 실용적 소요강성와 강도를 계산하였다. 이 값을 기준으로 5가지 높이를 변수로 한 반원형 스프링의 비선형 좌굴해석을 통해 적절한 강종과 두께를 선정하였다. 끝으로 최종 선정된 반원형 스프링의 거동을 반영하여 이차원으로 모델링한 건식형 좌굴방지가새의 비선형 좌굴해석을 통해 건식형 좌굴방지가새의 좌굴강도는 반원형 스프링 사이의 거리를 좌굴 길이로 갖는 심재의 좌굴하중과 유사함을 확인하였다.
본 연구에서는 주거용 및 사무용 계단시공의 작업공정의 단순화 및 시공품질 향상을 목적으로 개발된 혁신적인 계단 시스템인 슬라이딩스텝 철골계단의 진동 및 구조성능 평가를 수행하였다. 슬라이딩스텝 철골계단은 각형 강재 스트링거와 시공오차를 흡수할 수 있도록 설계된 스트링거 연결재 및 계단벽체 시공이 용이하도록 벽체 반대방향으로 이동이 가능한 슬라이딩 스텝으로 구성되어 있다. 하지만 철골계단의 경우 철골 접합부의 구조적 안전성 확보와 더불어, 비교적 경량에 저감쇠인 철골재 사용으로 인한 낮은 진동성능이 발현될 수 있기 때문에 진동성능에 대한 확보를 파악하는 것이 필수적으로 요구된다. 이에 본 연구에서는 진동성능 및 구조적 안전성 확보여부를 파악하기 위해 실물대 목업실험을 실시하였다. 진동성능 및 중량으로 인한 경제성 등을 종합적으로 판단하기 위해 콘크리트를 채운 스트링거와 콘크리트를 채우지 않은 스트링거를 교체해가며 각 경우에 대한 주거용 및 사무용 계단의 진동성능을 평가하였다. 또한 각 용도별로 한 개의 계단을 선정한 후, 재하실험을 통해 철골 접합부의 구조적 안전성과 스트링거 중앙부의 잔류 처짐 및 사용성 검토를 수행하였다. 실물대목업실험 결과 접합부 시스템의 경우 사용하중의 160%인 극한하중에 대해서도 탄성상태를 유지하며 재하실험 후에도 어떠한 균열이나 이상이 발견되지 않는 등 충분한 강성과 강도를 확보하고 있음을 확인하였다. 또한 스트링거 중앙부 처짐은 주거용/사무용 계단 모두 역시 동일한 하중조건 하에서 사용성에 문제가 없을 정도의 미미한 수준의 최대처짐과 잔류처짐이 발생하였으며, 최대하중이 가해질 때까지 스트링거가 탄성상태를 유지하는 등 설계하중을 지지할 수 있는 충분한 내력을 보유한 것으로 평가되었다. 진동성능 검토 결과 총 일곱 개의 스트링거 타입 중 다섯 개의 타입이 북미기준와 유럽기준에서 제시하는 기준의 허용치를 만족함을 확인하였다.
Oil contamination soil has been one of the most environmental social issues for decades in the inside and outside of country. The law of soil environmental preservation was carried out in the 1990s and the government controlled not only soil environment management and the remediation of contaminated soil but also promoted the development of remedial technology and cleanup business of contaminated soil by national policy. In addition to agriculture areas, the main oil contaminated sites are a gas station, oil reservoir, petro-chemical complex, site of railway carriage base and military camp. The contamination-frequency of agriculture area and effect sites are low but it has significantly important area on account of producing food for human beings. Therefore, we should be concerned about oil contamination damage of agriculture area. The oil contamination damage of agriculture area influenced drop of birth and breeding since the oil directly adheres to seeds and farm products even diffusion of contaminated soil to cultivation area. The studies of the crops and the food vegetation has not enough detailed data caused by the incident of oil contamination. This study investigated the effect of oil in germination and growth of selected plant seeds. In this study, we try to verify whether the oil contamination by accidents on farmland influenced the damage of farm produce and the mutual relation both oil contaminated soil or the vegetation of crops. The impact of oil on plant development was followed by phytotoxicity assessments. The plants exhibited visual symptoms of stress, growth reduction and perturbations in developmental parameters. The increase of the degree of pollution induced more marked effects in plants, likely because of the physical effects of oil. The relationships between the phytotoxicity contents of plants and growth reduction suggest a chemical toxicity of fuel oil. In addition, while cleaned up the contaminated soil under the standard of contaminated soil we examined it was suitable for region standard and it may have practical possibility for fill material of construction of afforestation and molding soil of landfill.
Welding is an essential process in the automotive industry. Most welding processes that are used for auto body are spot welding and $CO_2$ welding are used in a small part. In production field, $CO_2$ welding process is decreased and spot welding process is increased due to welding quality is poor and defects are occurred in $CO_2$ welding process frequently. But $CO_2$ welding process should be used at robot interference parts and closed parts where spot welding couldn't. Because of the 0.65mm ~ 2.0mm thickness steel sheet were used in the automotive industry, poor quality of welding area such as burn through and under fill were happened frequently in $CO_2$ process. In this paper, we will study about the penetration depth which gives a huge impact on burn through changing a degree of base metal, welding position and torch angle. Voltage, current and welding speed were fixed but degree of base metal, welding position and torch angle were changed. And Cold- Rolled(CR) steel sheet was used. Penetration depth was analysed by multiple regression analysis to derive approximate calculations. And reliability of approximate calculations were confirmed through additional experiments. As the results of this research, we confirmed the effect of torch and plate angle to bead shape. And we present a possibility that can simulate more accurate to weld geometry, as deduced the verification equations that has tolerance of less than 21.69%.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.