• Wind and Structures
• /
• v.30 no.2
• /
• pp.211-217
• /
• 2020

Vibrations of a wind turbine blade have a negative impact on its performance and result in failure of the blade, therefore an approach to effectively control vibration in turbine blades are sought by wind industry. The small domestic horizontal axis wind turbine blades induce flap wise (out-of-plane) vibration, due to varying wind speeds. These flap wise vibrations are transferred to the structure, which even causes catastrophic failure of the system. Shape memory alloys which possess physical property of variable stiffness across different phases are embedded into the composite blades for active vibration control. Previously Shape memory alloys have been used as actuators to change their angles and orientations in fighter jet blades but not used for active vibration control for wind turbine blades. In this work a GFRP blade embedded with Shape Memory Alloy (SMA) and tested for its vibrational and material damping characteristics, under martensitic and austenite conditions. The embedment portrays 47% reduction in displacement of blade, with respect to the conventional blade. An analytical model for the actuated smart blade is also proposed, which validates the harmonic response of the smart blade.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.530-533
• /
• 1986

A manipulator with 3 degrees of freedom is developed to automate operation of 60 ton pressing process. The pneumatically actuated manipulator is controlled by a programmable controller. Four seconds of cycle time which is faster than manual operation is achieved. Though the flexible feed mechanism, the system can accammodate any size of workpieces between 80*80 and 200*200 under 1 kg of weight.

• Tunnel and Underground Space
• /
• v.30 no.6
• /
• pp.591-602
• /
• 2020

Several alternative rock-cutting concepts, which are modified from the conventional ones, have been developed lately. Of the concepts, undercutting is one of the latest technologies. In this study, as a fundamental study on the undercutting technique, the rock-cutting mechanism and important parameters of the undercutting were introduced. This study built up cutting test system for evaluating the cutting performance of an actuated undercutting disc cutter (ADC), and carried out a series of cutting tests under different cutting parameters of ADC. The characteristics of cutter forces obtained from ADC rock-cutting tests were analyzed. The both average and peak values of the three directional cutter forces were linearly increased with the increases of linear velocity, penetration depth in vertical direction and eccentricity of ADC.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.48-53
• /
• 2005

In this paper, we present our recent progress in the LIPCA (Lightweight Piezo-Composite Actuator) application for actuation of a flapping wing device. The flapping device uses linkage system that can amplify the actuation displacement of LIPCA. The feathering mechanism is also designed and implemented such that the wing can rotate during flapping. The natural flapping-frequency of the device was about 9 Hz, where the maximum flapping angle was achieved. The flapping test under 4 Hz to 15 Hz flapping frequency was performed to investigate the flapping performance by measuring the produced lift and thrust. Maximum lift and thrust were produced when the flapping device was actuated at about the natural flapping-frequency.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.1
• /
• pp.35-43
• /
• 2008

The control of underactuated mechanical system is very complex for the loss of its control inputs. The model of underactuated mechanical systems in a potential field is built with Lagrangian method and its structural properties are analyzed in detail. A genetic algorithm (GA)based stable control approach is proposed for the class of under actuated mechanical systems. The Lyapunov stability theory and system properties are utilized to guarantee the system stability to its equilibrium. The real-valued GA is used to adjust the controller parameters to improve the system performance. This approach is applied to the underactuated double-pendulum-type overhead crane and the simulation results illustrate the complex system dynamics and the validity of the proposed control algorithm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.243-253
• /
• 2002

This paper presents the system modeling, analysis, and controller design and implementation for a rotational inverted pendulum system(RIPS), which is an under-actuated system and has the problem of unattainable angular velocity state. A sliding mode controller using the parameterization of both the hyperplane and the compensator fur output feedback is applied to the RIPS. Also, to improve the performance of the control system, a disturbance observer which estimates the disturbance, parameter variation, and some modeling errors of RIPS with less computational effort is used together. The results of simulation and experiment show that the proposed control system has superior performance for disturbance rejection and regulation at certain initial conditions.

• Journal of Mechanical Science and Technology
• /
• v.17 no.10
• /
• pp.1466-1474
• /
• 2003

This paper presents a system modeling, controller design and implementation for a rotational inverted pendulum system (RIPS), which is an under-actuated system and has the problem of unattainable velocity state. Two control strategies are applied to the RIPS. One is a sliding mode control method using the parameterization of both the hyperplane and the compensator for output feedback. The other is the disturbance observer which estimates disturbance and some modeling errors of RIPS with less computational effort. Some simulations and various kinds of experiments are performed in order to verify that the proposed controller has the ability to control RIPS whose velocity is assumed to be unavailable. The results of the simulations and experiments show that the proposed control system has superior performance for disturbance rejection and regulation at certain initial conditions as well as the robustness to model uncertainties.

• Agricultural and Biosystems Engineering
• /
• v.2 no.2
• /
• pp.50-58
• /
• 2001

Chemical application is very hazardous in confined spaces under the canopy ceiling in Korean vineyard. For a small orchard sprayer adaptable to such a working condition, a low-cost autonomous steering control system was developed using two ultrasonic sensors, two electrically-operated cylinders and 80196kc microprocessor. A distance ranging system timed the round-trip for each ultrasonic wave to travel against parallel targets, placed every 1.5m spacing along both sides of a desired path. A steering control algorithm of the autonomous operation began with ranging left and right targets and the heading was decided using difference between the distances. Electrically-operated cylinders actuated steering clutches to guide the sprayer. Evaluation tests showed that the orchard sprayer could travel within RMS value of 5cm along the desired path. Ground speed did not affect the performance of the autonomous guidance system at the speed ranges of 0.29~0.52m/sec.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.108-118
• /
• 2017

In this paper, the path tracking controller for a surface vessel based on the sliding mode control (SMC) with the switching law is proposed. In order to have no restriction on movement and improved tracking performance, the proposed control system is developed as follows: First, the kinematic and dynamic models in Cartesian coordinates are considered to solve the singularity problem at the origin. Second, the new multiple sliding surfaces are designed with the SMC and approach angle concept to solve the under-actuated property. Third, the switching control system is designed to improve tracking performance. To prove the stability of the proposed switching system under the arbitrary switching, the Lyapunov stability analysis method with the common Lyapunov function is used. Finally, the computer simulations are performed to demonstrate the performance, effectiveness and stability of the proposed tracking controller of a surface vessel.

• Structural Engineering and Mechanics
• /
• v.42 no.5
• /
• pp.677-699
• /
• 2012

This article studies the secondary resonances of a clamped-clamped microresonator under combined electrostatic and piezoelectric actuations. The electrostatic actuation is induced by applying the AC-DC voltage between the microbeam and the electrode plate that lies at the opposite side of the microbeam. The piezoelectric actuation is induced by applying the DC voltage between upper and lower sides of piezoelectric layer. It is assumed that the neutral axis of bending is stretched when the microbeam is deflected. The drift effect of piezoelectric layer (the phenomenon where there is a slow increase of the free strain after the application of a DC field) is neglected. The equations of motion are solved by using the multiple scale perturbation method. The system possesses a subharmonic resonance of order one-half and a superharmonic resonance of order two. It is shown that using the DC piezoelectric actuation, the sensitivity of AC-DC electrostatically actuated microresonator under subharmonic and superharmonic resonances may be tuned. In addition, it is shown that the tuning domain of the microbeam under combined electrostatic and piezoelectric actuations at subharmonic and superharmonic conditions is larger than the tuning domain of microbeam under only the electrostatic actuation.