• 한국지반공학회논문집
• /
• 제24권12호
• /
• pp.53-63
• /
• 2008

본 연구에서는 대형 챔버시험을 통해 결정된 고결모래의 콘선단저항과 고결모래의 횡방향구속 변형계수, 일축압축 강도, 전단강도와의 관계를 검토하였다. 시험결과 모래의 상대밀도나 연직구속압 뿐만 아니라 고결효과가 커질수록 콘선단저항과 횡방향구속 변형계수가 증가하였다. 모래의 횡방향구속 변형계수는 상대밀도나 연직구속압보다 고결의 영향이 더 크게 작용하며, 반면 콘선단저항은 변형계수보다 상대밀도나 연직구속압의 영향이 더 크게 나타났다. 고결결합 미파괴 상태로 간주될 수 있는 일축압축강도, 전단강도, 횡방향구속 변형계수와는 달리 콘선단저항은 고결결합을 파괴하며 측정되기 때문에, 고결모래의 변형계수를 $70{\sim}85%$ 정도 과소평가하였다. 또한 본 연구에서는 회귀분석을 통해 고결모래의 콘선단저항과 전단강도의 관계, 콘선단저항과 일축압축강도의 관계, 그리고 횡방향구속 변형계수와 콘선단저항, 일축압축강도의 관계가 표현되었다.

• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.25-35
• /
• 2006

본 연구에서는 폐어망을 이용한 보강 경량토의 역학적 특성을 고찰하였다. 본 실험에서 사용된 보강 경량토는 부산 신항 건설현장에서 채취한 준설토와 시멘트, 기포 및 폐어망으로 구성되어졌다. 다양한 함유율의 폐어망이 혼합된 보강 경량토의 보강효과를 고찰하고, 무보강 경량토와 보강 경량토의 거동 특성을 비교하기 위하여 다양한 실내실험이 수행되어졌다. 보강 경량토에 대한 실험결과 응력-변형 관계와 일축압축강도는 폐어망에 의해 큰 영향을 받는다는 것이 나타났다. 보강 경량토의 압축강도는 양생기간이 증가할수록 증가하며, 폐어망을 첨가함으로써 일반적으로 증가하지만, 압축강도 증가량은 폐어망 함유율에 비례하지는 않는다. 본 실험의 경우 폐어망 함유율이 0.25%일 때 최대 압축강도가 발현되는 것을 알 수 있었다. 한편, 보강 경량토의 함수비 변화는 양생기간 7일까지 급격하게 감소한 후 일정한 값에 수렴하였다.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.25-28
• /
• 2016

The Schmidt hammer test is one of the best nondestructive tests to measure the strength without breaking structures, which has been used to measure the strength of concrete structures in a simple way at construction sites. However, the future research is needed to apply Schmidt hammer in cold regions. This study is intended to investigate the correlation between unconfined compression test result of the oil storage facilities foundation taken at the King Sejong Antarctic Station and Schmidt hammer test result at the sample-taking site. Also, the equation for uniaxial compression strength using Schmidt hammer rebound value is proposed.

• 한국농공학회지
• /
• 제43권2호
• /
• pp.122-131
• /
• 2001

When mixed with lime, sand-bentonite mixture is characterized by considerable hydraulic properties similar to natural pozzolans and may therefore be increased in the strength of sand-bentonite mixture. The present study reports that results obtained in a series of laboratory tests carried out using particular mixing ratio of lime-sand-bentonite with the aim of investigating physical characteristics, permeability and strength. The results were compared and analyzed according to hydration time and lime content. Test results showed that increasing of strength and decreasing of permeability by proper lime content. Curing for longer periods increased unconfined compressive strength of mixture. Based on results of the falling head permeability test, mixtures of lime content 3%, 6% and 9% were satisfied in using as liner after 8-day curing periods.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.831-835
• /
• 2008

Recently, the use of C.S.G is gradually increasing as the construction material for dam, road, revetment and so on. The strength characteristics of C.S.G is affected by various influence factors such as specimen size, maximum grain size and water contents. Therefore, When designing and constructing the C.S.G structure, it is very important for us to understand the nature of used materials well and to test it's quality. Commonly, C.S.G strength test is used the cylinders specimen size of $15{\times}30$ at KS F2405. But, the specimen size extracted from the field structure is not regular. This paper aims at offering the experimental data about the compressive strength and elasticity modulus by change of the specimen size for the effective quality control of the C.S.G structure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1069-1080
• /
• 2008

The mechanical characteristic of Lightweight Foamed Soil(LWFS) are investigated in this research. LWFS is composed of the in-suit soil, cement and foam to reduce the unit-weight and increase compressive strength. The unconfined compressive tests are carried out on the prepared specimens of LWFS with various soil types to investigate the relationship between compressive strength of LWFS and physical properties of soil. The result indicate that coefficient of gradation($C_g$) and liquid limit(LL) are more important factor affecting compressive strength than other physical properties of soil and coefficient of gradation($C_g$) and liquid limit(LL) can standard to determine the optical soil among the in-situ soils for LWFS.

• Steel and Composite Structures
• /
• 제11권6호
• /
• pp.455-468
• /
• 2011

Although retrofitting and strengthening reinforced concrete (RC) columns by wrapping fiber reinforced polymer (FRP) composites have become a popular technique in civil engineering, the study on reinforced high-strength concrete (HSC) columns is still not sufficient. The objective of these companion papers is to investigate the mechanical properties of reinforced HSC square columns confined by aramid FRP (AFRP) jackets under concentric compressive loading. In the part I of these companion papers, an experiment was conducted on 54 confined RC specimens and nine unconfined plain specimens, the considered parameters were the concrete strength, the thickness of AFRP jackets, and the form of AFRP wrapping. The experimental process and results are presented in detail. Subsequently, some discussions on the confinement effect, failure modes, strength, and ductility of the columns are carried out.

• 한국농공학회지
• /
• 제35권4호
• /
• pp.55-66
• /
• 1993

Upon freezing a soil swells due to phase change and its compression stress increase a lot. As the soil undergo thawing, however, it becomes a soft soil layer because the 'soil changes from a solid state to a plastic state. These changes are largely dependent on freezing temperature and repeated freezing-thawing cycle as well as the density of the soil and applied loading condition. This study was initiated to describe the effect of the freezing temperature and repeated freezing-thawing cycle on the unconfined compressive strength. Soil samples were collected at about 20 sites where soil structures were installed in Kangwon provincial area and necessary laboratory tests were conducted. The results could be used to help manage effectively the field structures and can be used as a basic data for designing and constructing new projects in the future. The results were as follows ; 1. Unconfined compressive strength decreased as the number of freezing and thawing cycle went up. But the strength increased as compression speed, water content and temperature decreased. The largest effect on the strength was observed at the first freezing and thawing cycle. 2. Compression strain went up with the increase of deformation speed, and was largely influenced by the number of the freezing-thawing cycle. 3. Secant modulus was responded sensitivefy to the material of the loading plates, increased with decrease of temperature down to - -10$^{\circ}$C, but was nearly constant below the temperature. Thixotropic ratio characteristic became large as compression strain got smaller and was significantly larger in the controlled soil than in the soil treated with freezing and thawing processes 4. Vertical compression strength of ice crystal(development direction) was 3 to 4 times larger than that of perpendicular to the crystal. The vertical compression strength was agreed well with Clausius-Clapeyrons equation when temperature were between 0 to 5C$^{\circ}$, but the strength below - 5$^{\circ}$C were different from the equation and showed a strong dependency on temperature and deformation speed. When the skew was less then 20 degrees, the vertical compression strength was gradually decreased but when the skew was higher than that, the strength became nearly constant. Almost all samples showed ductile failure. As considered above, strength reduction of the soil due to cyclic freezing-thawing prosses must be considered when trenching and cutting the soil to construct soil structures if the soil is likely subject to the processes. Especially, if a soil no freezing-thawing history, cares for the strength reduction must be given before any design or construction works begin. It is suggested that special design and construction techniques for the strength reduction be developed.

• 대한토목학회논문집
• /
• 제32권1C호
• /
• pp.17-25
• /
• 2012

석탄회를 주재료로 사용한 저강도 고유동화재는 다짐이 필요없고 재굴착이 용이한 고유동성의 재료로 개발되었다. 본 연구에서는 이를 구조물 뒤채움용으로 사용하기 위해 경량화에 초점을 맞춘 기포를 혼입한 경량기포 저강도 고유동화재의 기초연구로써 최종비빔시간, 기포의 희석비에 따른 공학적 특성을 규명하여 최적비빔시간 및 최적희석비를 결정하였다. 기준 배합비를 중심으로 최종비빔시간과 희석비에 따라 플로우 시험, 기포슬러리의 단위중량측정 시험 및 일축압축강도 시험을 실시하였다. 시험결과, CASE N(최종비빔 4분, 희석비 2%), CASE O(최종비빔 4분, 희석비 3%)가 유동성(20cm 이상), 경량성(12~15 $kN/m^3$) 및 일축압축강도(800~1200kPa) 기준을 만족하는 것으로 나타나 이를 기준으로 구조물 뒤채움용 경량기포 CLSM재료를 제작 및 사용함에 있어서 참고가 될 수 있을 것으로 판단된다.

• 한국지반신소재학회논문집
• /
• 제10권4호
• /
• pp.61-70
• /
• 2011

본 연구에서는 TBM의 관입속도 예측에 대한 경험적 모델을 비교하기 위하여 현장사례를 이용하여 관입속도를 예측하였으며, 예측결과와 시공 시의 실측치를 비교 분석하여 합리적인 모델을 평가하였다. 관입속도 예측은 일축압축강도를 이용한 모델과 암석의 특성 및 TBM의 장비 특성을 고려한 모델로 적용하였다. 사례현장은 대부분 편마암으로 구성되어 있으며, 절리가 발달되어 약선대가 존재하기 때문에 암석의 일축압축강도가 불규칙적으로 나타났다. 일축압축강도를 이용한 예측결과에서 Graham(1976)의 모델은 낮은 강도의 경우, 비현실적인 예측결과가 나타나는 것으로 분석되었다. 평균 관입율을 이용한 각 모델들의 신뢰성을 분석한 결과, 암석의 특성 및 TBM 기계적 특성을 합리적으로 반영한 NTNU 모델(1998)이 가장 높은 것으로 확인되었다. 그러나 실측치와 비교한 결과에서는 일축압축강도를 바탕으로 예측하는 Tarkoy의 모델(1986)이 사례현장의 특성과 일치하는 것으로 분석되었다. 즉, TBM의 관입속도 예측 시에는 대상 암종, 지질특성 및 TBM의 장비 특성을 모두 고려하여 다양한 모델을 이용한 합리적인 예측이 수행되어야 한다.