• 콘크리트학회지
• /
• 제7권6호
• /
• pp.197-208
• /
• 1995

본 연구에서는 부착되지 않은 텐돈을 갖는 PS콘크리트 구조체에 대한 해석적 여구가 진행되었는데 해석결과는 기존의 실험결과들과 비교되었다. 기존의 실험 결과들로부터 하중변위 관계, 구조체의 파괴시 텐돈응력에 대한 설계식, 기존의 보통 철근량의 효과, 부재길이에 대한 부재두께의 효과, 하중의 종류에 따른 영향등을 해석적 연구와 병행하여 분석하였다. 총 12개의 실험결과가 분석되었는데, 그 중 6개는 2스팬 연속보이며, 나머지 6개는 3스팬 연속 슬래브였다. 해석 결과는 실험결과와 잘 일치함을 보여 주었으며, 구조체의 파괴시 텐돈의 응력은 기존의 보통 철근의 효과, 하중의 패턴, 텐돈의 형상 등에 따라 많은 영향을 받는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.662-667
• /
• 1998

Recently, the using PSC with external unbonded tendons is increased. However, the behavior of external unbonded tendons is different with that of bonded internal tendon at ultimate state by compatibility condition, the slip with friction at deviator and the change of tendon eccentricity e.t.c., So, the analytical research considered the effect of these inherent characters was performed and the tendency of external unbonded tendons was estimated by numerical examples. By the analytical results, load-deflection relationship and stress increment of external unbonded tendons were similar to those of internal bonded tendon at initial elastic behavior state. Those characters were, however, smaller than those character of internal bonded tendons. For external unbonded tendons, if the 1 deviator which is positioned at maximum moment point and more 2 deviators which are position between maximum moment point and support are existed, the flexural behavior is similar to internal bonded tendons.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.805-819
• /
• 2016

The numerical simulation methodologies to evaluate the structural behaviors of prestressed concrete containment vessels (PCCVs) have been substantially developed in recent decades. However, there remain several issues to be investigated more closely to narrow the gap between test results and numerical simulations. As one of those issues, the effects of no stiffness inside unbonded tendon ducts on the behavior of PCCVs are investigated in this study. Duct holes for prestressing cables' passing are provided inside the containment wall and dome in one to three directions for general PCCVs. The specific stress distribution along the periphery of the prestressing duct hole and the loss of stiffness inside the hole, especially in an unbonded tendon system, are usually neglected in the analysis of PCCVs with the assumption that the duct hole is filled with concrete. However, duct holes are not small enough to be neglected. In this study, the effects of no stiffness inside the unbonded tendon system on the behaviors of PCCVs are evaluated using both analytical and numerical approaches. From the results, the effects of no stiffness in unbonded tendons need to be considered in numerical simulations for PCCVs, especially under internal pressure loading.

• Computers and Concrete
• /
• 제3권1호
• /
• pp.43-64
• /
• 2006

A tendon model that can effectively be used in finite element analyses of prestressed concrete (PSC) structures with bonded tendons is proposed on the basis of the bond characteristics between a tendon and its surrounding concrete. Since tensile forces between adjacent cracks are transmitted from a tendon to concrete by bond forces, the constitutive law of a bonded tendon stiffened by grouting is different from that of a bare tendon. Accordingly, the apparent yield stress of an embedded tendon is determined from the bond-slip relationship. The definition of the multi-linear average stress-strain relationship is then obtained through a linear interpolation of the stress difference at the post-yielding stage. Unlike in the case of a bonded tendon, on the other hand, a stress increase beyond the effective prestress in an unbonded tendon is not section-dependent but member-dependent. The tendon stress unequivocally represents a uniform distribution along the length when the friction loss is excluded. Thus, using a strain reduction factor, the modified stress-strain curve of an unbonded tendon is derived by successive iterations. The validity of the proposed two tendon models is verified through correlation studies between analytical and experimental results for PSC beams and slabs.

• 대한토목학회논문집
• /
• 제28권4A호
• /
• pp.537-548
• /
• 2008

최근 들어 비부착 강선을 이용한 프리스트레스트 콘크리트 구조물의 건설이 증가하고 있다. 그러나 극한거동 해석 시 단면 적합조건을 이용하는 내부 부착 강선과는 다르게 비부착 강선은 부재의 전체거동에 의해서 응력 증가량이 결정된다. 또한 외부 강선의 경우에는 편향부에서의 미끌림 효과와 강선의 편심 변화 효과 등이 발생하게 된다. 따라서 본 연구는 비부착 강선을 가지는 프리스트레스트 콘크리트(PSC) 보의 거동 특성을 평가하고 비부착 강선의 극한 응력을 구하기 위하여 지간길이/유효깊이, 콘크리트 압축강도, 철근비 및 기존 부착강선의 영향 등을 변수로 하여 정적 휨실험을 수행하여 비부착 강선 부재의 휨거동 특성을 얻었다. 실험결과에 의하면 균열하중, 철근 항복 하중 및 파괴하중의 경우, 콘크리트 강도보다는 철근비의 영향이 더 크게 나타났으며, 강도 측면에서는 고강도의 경우가 저강도의 경우보다 약간은 구조 성능이 우수하나, 큰 차이는 없는 것으로 나타났다. 또한 L/dp 값이 커질수록 훨씬 더 긴 구간의 연성 거동이 있는 것으로 나타났다. 이는 철근 항복 이후 비부착 강선의 기여가 상당히 크다는 것을 알 수 있었으며, ACI-318에서 제시하고 있는 비부착 강선의 극한 응력식은 실험 결과와 잘 일치하지 않으며, 경향성도 없는 것으로 나타났다. 실험결과 들을 분석하여 미끌림 현상이 없는 비부착 강선의 극한응력에 대한 예측식을 제안하였다. 제안된 예측식은 실험결과와 비교적 잘 일치하는 것으로 나타났으며, 미끌림 현상이 없는 비부착 강선의 극한 휨거동 평가, PSC 부재 해석 및 설계 시 본 연구에서 제안된 식은 유용한 기초가 될 것으로 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.283-288
• /
• 2007

This paper presents an analytical prediction of Nonlinear characteristics of prestressed concrete bridges by strengthened of externally tendon considering the work sequence, using beam-column element based on flexibility method and tendon element. The beam-column element was developed with reinforced concrete material nonlinearities which are based on the smeared crack concept. The fiber hysteresis rule of beam-column element is derived from the uniaxial constitutive relations of concrete and reinforcing steel fibers. The tendon element represent the bonded tendon and unbonded tendon behaviors. Beam-column element and tendon element was be subroutine A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of RC and PSC structures was used. The proposed numerical method for prestressed concrete structures by strengthened of externally tendon is verified by comparison with reliable experimental results.

• 콘크리트학회지
• /
• 제11권1호
• /
• pp.209-219
• /
• 1999

본 연구와 관련한 이전의 연구에서는 기존연구에서 제시한 설계식 및 현행의 ACI 규준식에 대한 문제점을 분석하고 그 결과에 의해 비부착 긴장재의 극한응력을 평가할 수 있는 새로운 설계식을 제시하였다. 따라서 본 연구에서는 설계식에서 제안된 주요변수가 비부착 긴장재의 응력에 미치는 영향을 분석하기 위하여 총 14개의 실험체를 제작하여 실험을 수행하였다. 실험에 사용된 변수는 유효프리스트레스, 콘크리트 강도, 긴장재 양, 일반철근 양, 작용하중 형태, 스팬/춤 비 등이다. 실험결과에서는 유효프리스트레스가 증가하면 증가할수록, 그리고 긴장재 및 일반철근의 양이 증가할수록 긴장재의 응력증가량은 감소함을 알았다. 그리고 콘크리트 강도 및 작용하중의 형태도 긴장재의 응력에 영향을 미치는 것으로 나타났다. 또한 스팬/춤 비가 높은 경우에 현행의 ACI 규준식과는 상이하게 스팬/춤 비가 긴장재의 응력에 미치는 영향이 미미미한 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제38권5호
• /
• pp.675-696
• /
• 2011

It is difficult to accurately predict the flexural strength of prestressed members with unbonded tendons, unlike that of prestressed members with bonded tendons, due to the unbonded behavior between concrete and tendon. While there have been many studies on this subject, the flexural strength of prestressed members with unbonded tendons is still not well understood, and different standards in various countries often result in different estimation results for identical members. Therefore, this paper aimed to observe existing approaches and to propose an improved model for the ultimate strength of prestressed members with unbonded tendons. Additionally, a large number of tests results on flexural strength of prestressed members with unbonded tendons were collected from previous studies, which entered into a database to verify the accuracy of the proposed model. The proposed model, compared to existing approaches, well estimated the flexural strength of prestressed members with unbonded tendons, adequately reflecting the effects of influencing factors such as the reinforced steel ratio, the loading patterns, and the concrete strength. The proposed model also provided a reasonably good estimation of the ultimate strength of over-reinforced members and high-strength concrete members.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.13-24
• /
• 1999

The external, unbonded prestressed concrete(PSC) members exhibit very different structural behavior from that of internal bonded PSC members because of eccentricity change and slip occurrence during loading process. The purpose of the present study is to propose the ultimate failure stresses of prestressing (PS) steels for those external unbonded PSC members. To this end, a comprehensive analysis has been made using the nonlinear finite element analysis program developed recently for external unbonded PSC members by authors. A series of major influencing variables have been included in the analysis. It was found that the span-depth ratio, neutral axis depth-effective depth ratio, load geometry, amount of ordinary steel, and prestressing steel ration have great influence for the ultimate failue stress of PS steel is preposed and is compared with experimental dat as well as existing formulas for internal unbonded members. The Comparison indicates that the proposed equation agrees relatively well with experimental data and that existing formulas including ACI and AASHTO equations show some discrepancies from experimental ones. The present study allows more realistic analysis and design of prestressed concrete structures with external unbonded tendons.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.595-606
• /
• 2017

During their life span, post-tensioned concrete structures may be exposed to thermal loads. Therefore, there has been a growing interest in research on the advanced analysis and design of post-tensioned concrete slabs subjected to thermal loads. This paper investigates the structural behaviour of post-tensioned one-way spanning concrete slabs. A nonlinear finite element model for the analysis of post- tensioned unbonded and bonded concrete slabs at elevated temperatures was developed. The interface between the tendon and surrounding concrete was also modelled, allowing the tendon to retain its profile shape during the deformation of the slab. The load-deflection behaviour, load-force behaviour in the tendon, and the failure modes are presented. The numerical analysis was conducted by the finite element ANSYS software and was carried out on two different one-way concrete slabs chosen from literature. A parametric study was conducted to investigate the effect of several selected parameters on the overall behavior of post-tensioned one-way concrete slab. These parameters include the effect of tendon bonding, the effect of thermal loading and the effect of tendon profile. Comparison between uniform thermal loading and nonuniform thermal loading showed that restrained post tensioned slab with bottom surface hotter has smaller failure load capacity.