• 전기학회논문지
• /
• 제60권12호
• /
• pp.2230-2235
• /
• 2011

The purpose of this paper is to provide the unbalanced magnetic force and vibration mode comparison between two large interior permanent magnet machines(IPM) with different pole-slot combination considering stator and rotor eccentricity. Due to the punching tolerance, the mixed eccentricity of air-gap is inevitable. It will generate the asymmetric magnetic flux density in air-gap, which makes the unbalanced magnetic pull and vibration. The study is focused on the unbalanced magnetic force and their harmonic components according to eccentricity conditions such as static, dynamic and mixed. When the high vibration is produced especially resonance, the obtained results provide clues what eccentricity condition occurs in the machine.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1268-1275
• /
• 2005

Vibration in Engine module could be reduced by introducing a balance shaft module which has one or more unbalanced rotors. Since the unbalanced rotor is installed in an opposite direction of the free force or unbalance moment by engine component, the unexpected vibration could be decreased kinematically. The essential equation of the unbalanced rotor was Presented for two cases, 3 in-line and 4 in-line cylinder engine type, And the efficiency of the balance shaft is investigated by the vehicle testing that is focused on measuring the reduced vibration level when adapting a balancing module. With the signal processing of measured signals, some important issues on design the balancing shaft could be derived and the overall design process is explained in the final part including the peripheral component, i.e. housing and bush.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.615-620
• /
• 2005

Vibration in Engine module could be reduced by introducing a balance shaft module which has one or more unbalanced rotors. The unbalanced rotor is unbalanced in one direction that act as a opposite direction of the inertia force or moment triggered by engine component so that the largest order factor in vibration is efficiently decreased The ability of balance shaft to reduce the order element of engine component is investigated by a vehicle testing that is focused on comparing the vibration with balance shaft to that of without balance shaft. One of the commonly adapted balance shaft is tested by modal scheme for indemnifying the dynamic characteristics and an, the modal information is used for a clue to design the balance shaft module. The essential equation deriving the design parameters of unbalanced rotor is also presented for two cases, 3 in-ling and 4 in-ling cylinder model. Finally, the overall design process is explained with flow chart.

• 한국음향학회지
• /
• 제10권2호
• /
• pp.13-22
• /
• 1991

회전체를 내포하는 회전기계에서 진동의 근원은 불평형 질량이다. 본 여구에서는 정적평형 방법을 이용하여 돌출 회전축에 설치된 회전체의 평형을 바로 잡았으며, phase angle method 와 four run method로부터 보정 질량을 산정하였다. 또한, 평형잡이 전후의 진동의 감쇠를 조사하였다. 실험결과 불평형 질량에 의해 발생하는 진동은 불평형의 효과를 제거함으로써 감쇠됨을 확인하였다. 특히 불평형 질량이 작을 때, 진동의 감쇠력에서 four run method가 phase angle method 보다 더 유효함을 입증하였다.

• 한국소음진동공학회논문집
• /
• 제27권2호
• /
• pp.195-203
• /
• 2017

This paper is concerned with the active vibration control of shell structure that is subjected to internal unbalanced excitation by using active mounts and accelerometers. The unbalanced excitation is caused by a rotating unbalanced mass. The control algorithm considered in this study is the negative acceleration feedback (NAF) control. A simplified dynamic model was derived to verify the effectiveness of the NAF control. Four actuators and four accelerometers were mounted on the shell structure, so that the multiple-input and multiple-output (MIMO) NAF controller was designed by both centralized and decentralized ways. Numerical results show that both the decentralized and centralized NAF controllers are effective. Based on the numerical simulation, the proposed decentralized NAF controller was applied to the real shell structure. Experimental results show that the proposed decentralized NAF controller can effectively suppress vibrations of the shell structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.682-688
• /
• 2008

Transverse flux machine (TFM) has been considered as a promising driving machine especially at the low-speed applications because it has higher power density, torque and efficiency than the conventional electrical motors. However, it has complicated structure, large torque ripple and sometimes unbalanced magnetic force due to its inherent structure. This paper investigates the characteristics of torque ripple and unbalanced magnetic force of a rotatory two-phase TFM due to the teeth geometry by using the 3-dimensional finite element method, and it develops a rotatory two-phase TFM with herringbone teeth to reduce the torque ripple as well as to eliminate the unbalanced magnetic force.

• 한국음향학회지
• /
• 제10권4호
• /
• pp.48-55
• /
• 1991

본 연구에서는 동적평형 방법을 이용하여 두 지지축대에 설치된 불평형 회전체의 평형을 바로 잡았으며, seven run method를 이용하여 보정질량을 산출하였다. 또한 평형잡이 전후 진동의 감쇠를 조사하였다. 실험결과 두 지지축대에서 측정된 진동의 진폭은 불평형 질량에 비례함을 확인하였으며, 위상각 측정없이 진동의 진폭 측정만을 필요로 하는 seven run method가 동적평형 방법으로 유효함을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.847-852
• /
• 2007

This paper investigates the characteristics of cogging torque and magnetic force of a brushless DC (BLDC) motor due to imperfect magnetization of permanent magnet (PM) numerically and experimentally which results in the magnetically induced vibration. A predicted magnetization pattern of the PM of the BLDC motor, which is derived from the measured surface magnetic flux density along the PM, is applied to the finite element analysis in order to calculate the cogging torque and the unbalanced magnetic force. This research also develops the experimental setup to measure the unbalanced magnetic force as well as the cogging torque. It shows numerically and experimentally that the imperfect magnetization of permanent magnet generates the driving frequencies of cogging torque with integer multiple of slot number in addition to the least common multiple of pole and slot. It also shows that the driving frequencies of unbalanced magnetic force are integer multiple of slot number ${\pm}1$ due to imperfect magnetization of PM even in the rotationally symmetric design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.979-984
• /
• 2003

A Dynamic vibration absorber(DVA) is developed to reduce the excessive vibration of an optical disk drive(ODD) originated from the deriving range of an wobble disk and unbalanced disk. We design the material properties and shapes of the DVA by simulating Frequency response function(FRF) such as target frequency, mass of the DVA, stiffness of damper, damping coefficient, shape and dimension, analyze dynamic characteristics and provide its design guide line for suppressing the vibration of an optical disk derive. To examine the performance of the DVA, the vibration of the feeding system with DVA and without DAA are measured by using a three-axis accelerometer, PCB derive and Pulse analyzer. The result show that the proposed DVA reduces the vibration of wide range in ODD.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.867-870
• /
• 2002

In high-speed optical disk drive, the excitation caused by rotation of a mass-unbalanced disk is a major source of vibration. The vibration can be a disturbance to the servo system, which is sufficient to cause severe failures in the reading and writing process. The vibration also causes users to feel unpleasantness. The vibration reduction is therefore essential for the reliable operation of optical disk drive. One of the approaches to reduce the vibration is a dynamic vibration absorber (DVA). In this paper, we analyze the dynamic behavior of $DVD\pmRW$ combo drive system with DVA through 12_dof rigid multi-body dynamic model. The effective location and the optimal frequency ratio are obtained from the analysis.