• Journal of Oriental Physiology
• /
• v.14 no.2 s.20
• /
• pp.99-116
• /
• 1999

This study was undertaken to define the expression rule of six vital substances for human life(六氣) in Meridians and the rule of following of three ${\breve{U}}m$ and three Yan. In order to investigate the expression rule of six vital substances for human life(六氣), incident(標)-fundamental(本) and Ki of middle energizer(中氣) of three ${\breve{U}}m$ and three Yang(三陰三陽) were reviewed. 1, The rule of following is formed centering around fundamental Ki(本氣) between incident(標) and fundamental(本). And in case the ${\breve{U}}m$ and Yang (陰陽) disposition of incident(標) and fundamental(本) is different, whether the ${\breve{U}}m$ and Yang(陰陽) disposition of incident(標) and fundamental(本) is same as those of Ki of middle energizer(中氣), is the key point in following fundamental and activating of the vital energy(氣化). 2. As twelve channels(十二經脈) have not only fundamental Ki(本氣) but also Ki of middle energizer(中氣) at the same time, in expression of six vital substances for human life(六氣), if the fundamental Ki(本氣) is stronger, fundamental Ki(本氣) can be expressed or if the fundamental Ki(本氣) is weaker, Ki of middle energizer(中氣) can be expressed. 3. Twelve channels which is connected with each other through the relation of the interior and the exterior can be regarded as a system, in which Wind(風) and Fire(火), Dryness(燥) and Dampness(濕), Cold(寒) and Heat(熱) maintain balance through mutual control. 4. We can see that in the disease caused by the unbalance of six vital substances for human life(六氣), expression of six pathogenic factor and controlment of six vital substances for human life(六氣) are made up after the following one in the rule of following(從化規律).

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.142-148
• /
• 2022

In this paper, the weight reduction design of the yaw gearbox for wind turbine was performed through the finite element analysis method, and the stability was checked by performing the critical speed analysis. The weight reduction product can improve engine efficiency, save parts materials, and earn economic benefits. The yaw gearbox is lightweighted with the goal of achieving a safety rate of 1.3 or higher for wind turbine as indicated by IEC61400-1. In order to reduce the weight of the carrier, a topology optimization method was performed. The safety factor was verified by performing finite element analysis on the carrier. In addition, the housing and carrier were modeled using the finite element method, and the gear train was modeled using MASTA. For the yaw gearbox, the housing and carrier FE model and the gear train model were connected by the partial structural synthesis method to perform the rotational vibration analysis. Vibration excitation sources are mass unbalance and gear mesh frrequemcy, and as a result of the critical speed analysis, it was found that there was no resonance within the operating speed range.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.481-486
• /
• 2014

This study aims at enhancing the performance of file-referring octree, suggested by Han(2014), for efficiently querying huge 3D point clouds, acquired by the 3D terrestrial laser scanning. Han's method(2014) has revealed a problem of heavy declining in query speed, when if it was applied on a very long tunnel, which is the lengthy and narrow shaped anisometric structure. Hereupon, the shape of octree has been analyzed of its influence on the query efficiency with the testing method of generating an independent octree in each isometric subdivision of 3D object boundary. This method tested query speed and main memory usage against the conventional single octree method by capturing about 300 million points in a very long tunnel. Finally, the testing method resulted in which twice faster query speed is taking similar size of memory. It is also approved that the conclusive factor influencing the query speed is the destination level, but the query speed can still increase with more proximity to isometric bounding shape of octree. While an excessive unbalance of octree shape along each axis can heavily degrade the query speed, the improvement of octree shape can be more effectively enhancing the query speed than increasement of destination level.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.2
• /
• pp.141-149
• /
• 1975

Silkworm is known to be damaged under the unfavorable environmental conditions. Recently, it has been often argued that nicotine is a main factor to affect the silkworm nutritional balance and to result in decrease of quantitative characters, and unbalance of larval nutrition. Especially in spring season, there is tendency to produce nicotine damage to silkworm fed with the mulberry leaf near to tobacco field early cultivated in mulching system. In these connections, the trial was made in the different pots placing by the different distance 10rn, 20m, 40m, and 60m in the direction of east-north from the tobacco field. Location of pot near to the tobacco fold is 40m below the tobacco Held and gradually higher than the tobacco field by 10 degree of slope. In addition, when the mulberry field is divided into two areas from the east-south to west-north, southern east zone is lowering down below 10 degree of slope and has 36％ of east-south wind, 21％ of south-east wind and 16％ of south wind, etc. Pots are left on the mulberry field from the completion of lower part leaf harvest to just before upper part leaf harvest is completed for 32 days. Then silkworm at 4th-5th stage was fed with the leaf grown during the period and larval characters are statistically analyzed. The results are summarized as follows： 1. 10-40m distant pot statistically at the same level has the longest larval duration and 60m distant pot is. not significant at 5％ level. Whole larval duration has same tendency as in the 5th larval duration. 2. Percentage of delayed molting larvae at the 5th stage is increased in 10m distant pot and there is no significance statistically in other pots, as compared with that of control. 3. It is not showed that there is no damage to mortality of the old larvae in 60m distant pot. 4. 10-20m distant pot produces a low pupation and others are at the same level statistically at 5％ significance, 5. It is showed that nicotine damage is occurred in single cocoon freight and cocoon shell weight up to 60m distant pot, rather higher damage in cocoon shell weight than in single cocoon weight. 6. It is showed that cocoon yield from 10, 000 molted larvae including double cocoon is decreased up to 40m distant pot far from the tobacco field in which 40％ of cocoon yield in 10m distant pot by 7kg, 26％ of cocoon yield in 20m distant pot by 3.9kg, 24％ of cocoon yield in 40m distant pot by 3.6kg, and 12％ of cocoon yield in 60m distant pot by 1.8kg, as compared with control. However, there is no significance statistically at 5％ level in 60m distant pot. With these above results, it is concluded that nicotine da mage could be occurred in cocoon yield and cocoon quality up to 60m distant far from the tobacco field.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.717-721
• /
• 2011

In case of plastic film greenhouses cultivating fresh vegetables on paddy soil, soil characteristics must be considered as more important factor than any other factors. Generally after the four years of cultivation, soils tend to increase electrical conductivity value, nutrient unbalance and soil pests. As a result, degradation of agricultural products occurred, therefore it is necessary to improve soil conditions. In this study, yield and economic cost of cucumber were analyzed. The best soil conditions for cucumber cultivation were alluvial or valley in soil topology, moderately or poorly drainage in soil drainage classes, coarse loamy soil in texture. In addition, rich-sunlight and-deep groundwater would be proper for the cucumber cultivation. Good environmental managements of plastic film greenhouse were as follows. The temperature needed to be adjusted three times. The optimal daytime temperature could be $22{\sim}28^{\circ}C$, the one from 12 until night could be $14{\sim}15^{\circ}C$, and the temperature from 24 to sunrise could be $10{\sim}12^{\circ}C$. During plant growth period, soil moisture content was as low as 10~15%, and it needed to be maintained as 15~20% during reproductive growth period. To control pests, catch crop cultivation and solar treatment were carried out, after those EC was reduced and the root-knot nematode was controled too. Cucumber yield from the plot with improved soil managements increased to $158.4Mg\;ha^{-1}$, but plot with successive cropping injury yielded $140.3Mg\;ha^{-1}$. The income from the plot with improved soil managements was 215,676 thousand won $ha^{-1}$, the plot with successive cropping injury was 131,649 thousand won $ha^{-1}$. Income rate of each plot was 51.8% and 38.4%, respectively.