• 제목/요약/키워드: Unambiguous Velocity

검색결과 6건 처리시간 0.025초

고반복 펄스열을 사용하는 탐색기에서의 표적거리 측정 (Range Measurement in High PRF Seeker)

  • 홍동희;박성철;양태석;윤태환
    • 한국군사과학기술학회지
    • /
    • 제5권3호
    • /
    • pp.45-55
    • /
    • 2002
  • 중거리 유도무기 체계가 탄도탄과 같이 기동이 심한 표적과 교전할 때에는 지상 레이더는 표적 및 유도탄 위치정보를 보다 빈번하게 전송하여야 하지만, 자신의 임무를 수행해야 하므로 유도탄 및 교전 표적에 대한 정보를 필요이상으로 자주 전송할 수 없다. 이러한 상황에서 탐색기가 자체적으로 표적의 거리, 속도, 방향을 측정함으로서 지상레이더에 추가 부담을 지우지 않고 우수한 추적 정밀도로 교전성능을 향상할 시킬 수 있는 고반복 펄스열을 사용하는 PRF 변조방식을 제안한다.

용인테스트베드레이다를 이용한 Dual PRF 모드의 시선속도 접힘 풀기 알고리즘 개발 (Development of Unfolding Radial Velocity Algorithm for Dual PRF Mode of Yong-In Testbed(YIT) Radar)

  • 김혜리;석미경;남경엽;고정석
    • 한국전자파학회논문지
    • /
    • 제27권6호
    • /
    • pp.521-530
    • /
    • 2016
  • 기상레이다는 전자기파를 대기 중에 방사하여 목표물에 부딪혀서 되돌아오는 후방산란 신호를 수신하는 기상장비이다. 기상청의 기상레이다는 도플러 관측 기능을 가지고 있기 때문에 목표물의 시선속도를 산출할 수 있다. 그러나 기상레이다의 넓은 관측 반경을 확보하려면 관측 속도 범위가 작아져 이를 넘어서는 시선속도는 접힘 현상이 발생한다. 따라서 최대 관측 반경을 유지한 채 관측 속도 범위를 넓히기 위해서는 high PRF와 low PRF 두 개의 서로 다른 PRF로 신호를 송 수신하는 dual PRF(Pulse Repetition Frequency) 모드 기능을 이용해야 한다. Dual PRF 모드를 이용하면 high와 low PRF로 관측된 두 최대 속도의 최소공배수만큼 관측 속도 범위를 넓힐 수 있다. 이를 위해 본 연구에서는 high PRF와 low PRF로 관측된 시선속도의 차이값과 이에 대한 오차를 고려한 분류 기준을 만들고, 분류된 영역별로 보정 인자를 산출하여 시선속도 펼침을 수행하는 시선속도 접힘 풀기 알고리즘을 개발하였다. 이를 용인테스트베드레이다에 적용한 결과, 기존에 산출되는 시선속도보다 개선된 성능을 보였다.

ALMA Observations of a Keplerian Disk in the Infalling Envelope of L1527

  • Lee, Jeong-Eun;Lee, Seokho;Evans, Neal;Di Francesco, James;Choi, Minho;Jorgensen, Jes;Myers, Philip;Mardones, Diego
    • 천문학회보
    • /
    • 제40권1호
    • /
    • pp.67.2-67.2
    • /
    • 2015
  • We report Atacama Large Millimeter/submillimeter Array (ALMA) cycle I observations of L1527, a class 0 object with an infalling envelope and a rotating disk. HCO+ and HCN J=4-3 show strong redshifted absorption against the bright continuum emission associated with the optically thick disk or inner envelope. This redshifted absorption dip is an unambiguous evidence of infall. In addition, these lines and CS J=7-6 present the Keplerian rotation profile at their position-velocity diagrams, suggesting the formation of a Keplerian disk very early in star formation. We will present a model combining an infalling envelope and a Keplerian disk to fit the ALMA observations.

  • PDF

미세 리블렛 평판 상부 난류경계층 유동에서 횡방향 와의 공간적 분포특성 (Spatial Distributions of Spanwise Vortices in a Turbulent Boundary Layer over a Micro-riblet Film)

  • 최용석;이상준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2660-2665
    • /
    • 2007
  • Turbulent boundary-layer over a micro-riblet film(MRF) was investigated experimentally. The MRF has sharp V-shaped micro scale grooves of $300{\mu}m$ in width and $176.8{\mu}m$ in height. Particle image velocimetry(PIV) system was employed to measure velocity fields of flow over the MRF coated plate. Flow over a smooth plate was also measured for comparison. The PIV measurements were taken in the streamwise wall-normal planes at Re$\theta$= 985 and 2342. Vortex structures of the flow were analyzed by extracting the swirling strength as an unambiguous vortex-identification criterion. As a result the number of spanwise vortices with clockwise(negative) rotation decreases rapidly in the near-wall region(y<0.2h), but decreases slowly in the outer region(0.2h

  • PDF

인간의 보행 및 미끄러짐 특성에 기반한 끌기형 미끄러짐 저항 측정 조건 (Measurement Criteria for Drag-Sled Type Slip Resistance Tester Based on Human Gait and Slip)

  • 박재석;권혁면;오환섭
    • 한국안전학회지
    • /
    • 제27권5호
    • /
    • pp.179-184
    • /
    • 2012
  • This study was performed to find out the measurement criteria of slip resistance from analysis of human gait and slips. Many kinds of slip resistance testers were developed based on mechanical friction testers. But, there are, as yet, no unambiguous slip resistance measurement methodologies and generally accepted safety criteria or safety thresholds for estimating slipping hazard exposures. Also, there are variety of measuring conditions between those testers. The measurement criteria should be tested within the range of human slipping conditions observed in biomechanical studies. It's results should clearly consider whether the devices reflect the human slipping conditions. In this study a dragsled type friction tester, which was constructed in accordance with ISO 15133 basically, was used. Test conditions were set in order to determine the range of measurement criteria. It is shown that drag velocity should be more than 1 m/s, acceleration be more than 10 $m/s^2$, contact time be less than 0.1sec, and contact pressure be within 350~400 kPa.

국내 지반특성에 적합한 지반분류 방법 및 설계응답스펙트럼 개선에 대한 연구 (II) - 지반분류 개선방법 (Development of Site Classification System and Modification of Design Response Spectra considering Geotechnical Site Characteristics in Korea (II) - Development of Site Classification System)

  • 윤종구;김동수;방은석
    • 한국지진공학회논문집
    • /
    • 제10권2호
    • /
    • pp.51-62
    • /
    • 2006
  • 동반논문 (I)에서는 국내 지반특성에 적합하도록 국내 내진설계기준이 개선되어야 한다는 결론을 얻었다. 본 논문에서는 우수한 지반분류 방법을 찾기 위하여 상부 토층 30m의 평균 전단파속도$(V_{S30})$, 지반의 고유주기$(T_G)$ 및 기반암 깊이를 이용한 지반분류 방법에 대하여 심도있게 검토하였다. 증폭계수$(F_a,\;F_v)$의 표준편차, 해석결과의 평균 스펙트럼 가속도와 재산정된 응답스펙트럼을 비교한 결과 각각의 방법에서 큰 차이가 발생하지 않아 특정한 방법이 우수하다고 판단하기 힘들었다. 그러나, $T_G$를 이용한 방법에서 RRS 값의 증폭구간이 좁은 구간에 집중되는 경향을 보여 지진시 유사한 거동특성을 나타내는 지반을 같은 지반그룹으로 분류할 수 있는 장점이 있었다. 또한, 증폭계수와 $T_G$의 상관관계를 나타내는 추세선의 경우, $V_{S30}$ 방법 보다 입력 가속도의 증가에 따른 지반의 비선형성 효과를 더욱 명확하게 나타낼 수 있었다. 마지막으로, $V_{S30}$을 이용하여 지반을 분류할 경우 기반암이 30m 보다 얕은 곳에 존재하는 경우에도 무조건 심도 30m까지 기반암의 전단파속도를 가정하여 계산해야 하나, $T_G$를 이용할 경우 이러한 불확실성을 제거할 수 있어 우수한 방법으로 판단된다. 본 논문에서는 지반의 고유주기를 이용한 방법을 기반암 깊이가 얕은 국내지반특성에 적합한 지반분류 방법으로 제안하였다.