• International Journal of Oral Biology
• /
• v.33 no.4
• /
• pp.137-141
• /
• 2008

The present study reports the protective properties of a total methanol extract of B. platyphylla var. japonica against ultraviolet (UV)-C irradiation. Pretreatment of Chinese hamster fibroblast (V79-4) cells with a total methanol extract significantly increased cell survival following $300\;J/m^2$ of UV-C irradiation. The total methanol extract was further fractionated into 5 fractions: n-hexane, dichloromethane, ethylacetate, n-butanol and water fractions. Among these fractions, B. platyphylla var. japonica ethylacetate, butanol and water fractions showed significant protective effects against the cellular damage induced by UV-C irradiation. In order to elucidate the mechanism underlying this protective effect, DPPH (Editor note: abbreviations should be spelled out at first use.) radical scavenging and lipid peroxidation inhibitory activity were measured. Significant radical scavenging and lipid peroxidation inhibitory activities were observed for the ethylacetate fraction. In summary, the present data demonstrate that an extract of B. platyphylla var. japonica has a significant protective effect against UV-C irradiation. The underlying mechanism of this protective effect may involve radical scavenging and inhibition of lipid peroxidation by the B. platyphylla var. japonica extract.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.351.2-351.2
• /
• 2014

Indium tin oxide (ITO) has a lot of variations of its properties because it is basically in an amorphous state. Therefore, the differences in composition ratio of ITO can result in alteration of electrical properties. Normally, ITO is considered as transparent conductive oxide (TCO), possessing excellent properties for the optical and electrical devices. Quantitatively, TCO has transparency over 80 percent within the range of 380nm to 780nm, which is visible light although its specific resistance is less than $10-3{\Omega}/cm$. Thus, the solar cell is the best example for which ITO has perfectly matching profile. In addition, when ITO is used as transparent conductive electrode, this material essentially has to have a proper work function with contact materials. For instance, heterojunction with intrinsic thin layer (HIT) solar cell could have both front ITO and backside ITO. Because each side of ITO films has different type of contact materials, p-type amorphous silicon and n-type amorphous silicon, work function of ITO has to be modified to transport carrier with low built-in potential and Schottky barrier, and approximately requires variation from 3 eV to 5 eV. In this study, we examine the change of work function for different sputtering conditions using ultraviolet photoelectron spectroscopy (UPS). Structure of ITO films was investigated by spectroscopic ellipsometry (SE) and scanning electron microscopy (SEM). Optical transmittance of the films was evaluated by using an ultraviolet-visible (UV-Vis) spectrophotometer

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.108-108
• /
• 2010

We have generated Ne-Xe plasma in dense plasma focus device with hypocycloidal pinch for extreme ultraviolet (EUV) lithography and investigated an electron temperature. We have applied an input voltage 4.5 kV to the capacitor bank of 1.53 uF and the diode chamber has been filled with Ne-Xe(30%) gas in accordance with pressure. If we assumed that the focused plasma regions satisfy the local thermodynamic equilibrium (LTE) conditions, the electron temperature of the hypocycloidal pinch plasma focus could be obtained by the optical emission spectroscopy (OES). The electron temperature has been measured by Boltzmann plot. The light intensity is proportion to the Bolzman factor. We have been measured the electron temperature by observation of relative Ne-Xe intensity. The EUV emission signal whose wavelength is about 6~16 nm has been detected by using a photo-detector (AXUV-100 Zr/C, IRD) and the line intensity has been detected by using a HR4000CG Composite-grating Spectrometer.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.1-5
• /
• 2006

In order to produce a variety of lighting effects most of the modem museums use various light sources in the same space. This indicates, in other words, that each item on display is being exposed to a different lighting environment. There are required, however, different conditions for optimum environments for displaying and preserving items, respectively. In this research visible rays, ultraviolet rays and infrared rays measured in the show cases and display rooms of the National Museum of Korea were analyzed to assess its lighting environment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.687-690
• /
• 2009

It has been recently reported that nano-sized MgO single crystal powders emit ultraviolet by stimulation of electrons under vacuum condition. Therefore, in this study, nano-crystalline MgO powders were applied to a xenon plasma flat fluorescent lamp for LCD backlight to improve emission efficiency of the lamp by help of extra ultraviolet from nano-MgO. For comparison with nano-crystalline MgO powders, MgO nano-thin film was applied directly on phosphors inside a lamp panel through e-beam evaporation The luminance and efficiency of FFL with an addition of MgO nano-crystal powders on phosphors were improved by around 20%. Application of MgO thin film to phosphors worsened the emission characteristics of FFLs, even rather than FFL without MgO. The reason came from insufficient stimulation of phosphors by UV, crystallinity of MgO, and low secondary electron coefficient.

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.336-340
• /
• 2014

The functionality such as deodorant, antibacterial, ultraviolet shielding of titanium dioxide self-actuated photocatalyst $Weltouch^{TM}$ treated polyester fiber was characterized in conditions without light. The deodorizing capacity was maintained more than 97% reduction irrespective of before washing and after 20 times repeated washing, and antimicrobial capacity was also retained more than 99.9% reduction. Titanium dioxide self-actuated photocatalyst was still maintained to the surface of polyester fiber without separation even after 20 times repeated washing. According to washing durability of polyester fiber, the reduction effect for ammonia was still retained even after 20 times repeated washing as much as before washing. The ultraviolet shielding capacity was still maintained at least 83% irrespective of before washing and 20 times repeated washing.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.53.2-53.2
• /
• 2021

Quasar luminosity function (QLF) shows the active galactic nucleus (AGN) demography as a result of the combination of the growth and the evolution of black holes, galaxies, and dark matter halos along the cosmic time. The recent wide and deep surveys have improved the census of high-redshift quasars, making it possible to construct reliable ultraviolet (UV) QLFs at 2 < z < 6 down to M1450 = -23 mag. By parameterizing these up-to-date observed UV QLFs that are the most extensive in both luminosity and survey area coverage at a given redshift, we show that the UV QLF has a universal shape, and their evolution can be approximated by a pure density evolution (PDE). In order to explain the observed QLF, we construct a model QLF employing the halo mass function, a number of empirical scaling relations, and the Eddington ratio distribution. We also include the outshining of AGN over its host galaxy, which made it possible to reproduce a moderately flat shape of the faint end of the observed QLF (slope of ~ -1.1). This model successfully explains the observed PDE behavior of UV QLF at z > 2, meaning that the QLF evolution at high redshift can be understood under the framework of halo mass function evolution. The importance of the outshining effect in our model also implies that there could be a hidden population of faint AGNs (M1450 > -24 mag), which are buried under their host galaxy light.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1765-1767
• /
• 1999

We synthesised a photo-alignment material of PM4Ch (poly(4-methacryloylloxychalcone)). The electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-liquid crystal display (LCD) with linearly polarized ultraviolet (UV) light irradiation on PM4Ch surface were investigated. The uniform alignment of NLC with polarized UV light irradiation on PM4Ch surface was measured. Also, We had The excellent voltage-transmittance characteristics of photo-aligned TN-LCD. The low threshold voltage of photo-aligned TN-LCD was measured. Moreover, the fast response time of photo-aligned TN-LCD on PM4Ch was successfully achieved. Finally The reduction DC voltage of photo-aligned TN-LCD decreases with increasing the UV light irradiation time on photo-dimerized PM4Ch surface.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1759-1761
• /
• 1999

The generation of pretilt in nematic liquid crystal(NLC)and electro-optical(EO) characteristics of photo-aligned twisted nematic (TN)-LCD with oblique p-polarized ultraviolet (UV) light irradiation on the two kinds of the soluble polyimide (PI) surfaces containing trifluoromethyl moieties were investigated. The generated pretilt angle of NLC is about $2.5^{\circ}$ with p-polarized UV light irradiation of $20^{\circ}$ on PI-3 surface at 20 min.; However pretilt angle of about $0.5^{\circ}$ are observed on PI-1 and PI-2 surfaces. The generated pretilt angle of NLC on PI-3 surface may be attributed to the trifluoromethyl moieties attached to the lateral benzene rings. The voltage-transmittance and response time characteristics of photo-aligned TN-LCD with p-polarized UV light irradiation of $20^{\circ}$ on PI-1 surfaceat at 20 min were almost same in comparison with the rubbing-aligned TN-LCD. However, the high threshold voltage and slow response are observed on PI-3 surface. Also, the decay time $\tau_d$ of photo-aligned TN-LCD is attributed to the anchoring energy of NLC.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.105-107
• /
• 2008

Dyeing properties of the colorants extracted from pomegranate hull on hair were investigated to study its efficay of natural hair coloring dye. Effect of dyeing condition and mordanting on dye uptake, color change and colorfastness were explored. In addition, tensile strength retention is measured and the surface of the hair was observed by SEM. The water extracted pomegranate hull was concentrated and freeze-dried for preparing colorant powders. It was considered that ionic bonding was involved in the adsorption of pomegranate colorants to hair. Pomegranate hull colorants produced greyish brown colors on hair and the hair mordanted with Fe showed dark brown color. Mordant except Fe did not significantly increased dye uptake. Mordant except Cu increased light fastness, mordant except Cr increased washing fastness. SEM to observe the hair is damaged by ultraviolet light and cleaning. This is consistent with the results of tensile strength retention. From the results of colorfastness th washing and light, it was concluded that colorants from pomegranate hull can be need as a semi-permanent natural hair coloring dye.