• KSBB Journal
• /
• 제10권3호
• /
• pp.298-303
• /
• 1995

과산화수소는 유기물에 접촉시에 물과 산소로 급속하게 분해되어 탄수화물과 같은 고분자물질을 저 분자물질로 분해하는 특성을 지니고 였다. 이러한 특성이 inulin의 산 가수분해 반응에 미치는 영향을 초음파를 조사시키면서 연구하였다. 반응조건은 온도가 $50∼60^{\circ}C$ 엽산의 농도가 O.1~O.3%(w/w) 였고, 이 조건하에서 과산화수소 농도가 2.3% (w/v) 일 때 가수분해 효과가 최대로 나타났다. 과산화 수소의 첨가로 control 반응에 비해 9~43% 의 분 해속도 증가를 보였다. 과산화수소를 첨가했을 경우 와 첨가하지 않았을 경우에 활성화에너지는 각각 26kcal/mol과 25kcal/mol로 거의 통일하였다. 따라서 과산화수소에 의한 inulin 가수분해 속도의 상승 효과는 frequency factor의 증가로 해석되 었다.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.136-141
• /
• 2010

ACF/ZnO photocatalyst was synthesized by a sol-gel method using activated carbon fiber (ACF) and Zn $(NO_3)_2$ as precursors. Samples were characterized by Brunauer-Emmett-Teller measurements (BET), scanning electron microscope (SEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX). The XRD results showed that ACF/ZnO composites only included a hexagonal phase by heat-treated temperature at $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, and $700^{\circ}C$. The SEM analysis revealed that the ACF/ZnO composites did not exhibit any morphological changes of the catalyst surface according to the different heat-treated temperatures. The photocatalytic activity of the samples was tested for degradation of methylene blue (MB) solutions under ultraviolet (UV) light and ultrasonication respectively. The results showed that the photocatalytic activity of ACF/ZnO composites heat-treated at $500^{\circ}C$ was higher than other samples, which is ascribed to the fine distribution of ZnO particles on the surface of the ACF. In addition, an ultrasound of low power (50 W) was used as an irradiation source to successfully induce ACF/ZnO composites to perform sonocatalytic degradation of MB. Results indicated that the sonocatalytic method in the presence of ACF/ZnO composites is an advisable choice for the treatments of organic dyes.

• 비파괴검사학회지
• /
• 제16권4호
• /
• pp.241-250
• /
• 1997

액체/고체 경계면에서 후방 복사된 초음파의 주파수 분석에 의해 Si layer/mesh Au/Si substrate 시편에 존재하는 표면 탄성파의 주파수 의존성이 측정되었다. 사용된 광역 탐촉자(2, 5, 10MHz)의 주파수에 따라 다르게 나타난 후방 복사의 입사각 의존성은 이 현상이 표면 지역에 발생된 표면파로부터의 에너지 복사에 의한 것임을 보여주었다. 후방 산란된 초음파의 입사각 의존성을 연속적으로 측정하기 위한 초음파 각도계가 제작되었고 다른 비율의 구리 분말이 섞인 에폭시에 의해 접착된 Ni layer/Al substrate 시편에 대해 후방복사 세기의 입사각 의존성이 측정되었다. (5MHz) 후방 복사의 폭과 패턴은 표면파 속도의 주파수 의존성, layer 접합의 질 그리고 표면 지역의 구조 등 여러 정보를 가지고 있음이 밝혀졌다.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2088-2092
• /
• 2011

The accelerated thermal aging of CSPE(chloro sulfonate polyethylene) of test cables were carried out for the period equal to 10, 20 and 30 years in air at $100^{\circ}C$, respectively. The CSPE cables(TAIHAN electric wire Co. Ltd) which installed in nuclear power plant for three years were used as starting materials. Condition monitering methods of the accelerated thermal aging of CSPE cables were estimated through indenter modulus and OIT(oxidation induction time) of IEC 62582, and those were newly estimated through volume electrical resistivity, ultrasound reflection time, density, FE-SEM(field emission scanning electron microscopy), XPS(x-ray photoelectron spectroscopy), EDS(energy dispersive spectroscopy), and WD-XRF(wavelength dispersive x-ray fluorescence). A new condition monitoring methods of the accelerated thermal aging of CSPE cables were generally coincident with trend of indenter modulus expect EDS, XPS and XRF. A volume electrical resistivity among new condition monitoring methods of the accelerated thermal aging of CSPE cables is excellent. It is considered that life-time of CSPE cable can be predicted through volume electrical resistivity, if CSPE jacket was aged for period such as more than 20 years.

• 한국음향학회지
• /
• 제42권2호
• /
• pp.143-151
• /
• 2023

본 논문은 표준 중량충격원을 이용한 건축물의 바닥충격음 차단성능을 측정하는 경우 측정불확도를 평가하는 방법을 다루었다. 반복 측정의 영향 이외에도 측정 위치의 영향, 가진 위치의 영향, 음압측정에 사용된 장비의 영향 및 충격원의 영향 등을 고려하였다. 평균 최대 바닥충격음 레벨 측정의 수학적 모델을 제시하고 요인별 불확도 평가방법을 제안하였으며, 제안한 방법을 실제 측정 결과에 적용하여 평균 최대 바닥충격음 레벨 및 측정불확도를 평가하였다.

• 대한지역사회영양학회지
• /
• 제10권1호
• /
• pp.91-100
• /
• 2005

This study was conducted to investigate the effects of smoking on nutrition intake, bone mineral density and blood mineral status. The subjects were composed of two groups: 100 smokers and 100 non-smokers was used along with a questionnaire. Anthropometric measurements, dietary intakes using 24-hours recall method were compared. At twenty subjects from each group were selected, bone mineral density were measured by quantitative ultrasound and plasma mineral levels were analyzed by ICP spectrometer. The average ages of smokers and non-smokers were 23.9 and 22.8 years old, respectively. The height, weight and BMI of the smokers were no significant difference. The average numbers of smoked cigarettes were 11.8/d and the average packyear was 3.1 in the smokers. About $97\%$ of the smokers drank alcoholic beverages, while $85\%$ of the non-smokers did. The smokers tended to eat less meals and dinner meal, but drink coffee more often compared to the non-smokers. The mean daily energy intake and CPF energy intake ratio were 2184. 9 kcal and 57.2 : 13.7 : 26.4 in the smokers and 2262.6 kcal and 55.8 : 13.1 : 28.6 in the non-smokers. The smokers consumed significantly lower intake of $\beta$-carotene. There were no significant differences in bone mineral density of BUA, SOS and QUI. There were no significant differences in plasma levels of Ca, Mg, Fe and Zn. However, plasma Cu level of the smokers was significantly higher than that of the non-smokers. In conclusion, the smokers of this study showed a more undesirable dietary intake in the light of their low ,B -carotene and high alcoholic beverages, and coffee. The plasma Cu level of the smokers was higher than that of the non-smokers, showing that Cu is involved in smoking. Therefore, it could be suggested that more systematic research be conducted with respect to Cu and smoking and that increased nutrition education and guidelines for smokers are required.

• 대한지역사회영양학회지
• /
• 제15권3호
• /
• pp.393-402
• /
• 2010

The purpose of this study was performed to evaluate the prevalence of overweight and to compare the dietary behaviors, nutrient intake and physical activities of specialized game high school students. Total of 163 subjects participated and their weight, height, waist circumference, hip circumference and bone status by a quantitative ultrasound method were measured. The subjects were surveyed by a self-administered questionnaire about general characteristics, dietary behaviors and physical activities. Nutrient intakes of the subjects were assessed by semi-quantitative food frequency questionnaire. The subjects were divided into four groups on their obesity level by BMI. The prevalence of underweight, normal, overweight and obese group was 6%, 58%, 16%, and 20% respectively. BMI was negatively correlated with bone mineral density (p < 0.01) and positively correlated with WHR (p < 0.01). The dietary guideline compliance score for "Enjoy Korean rice food style" was 2.63, followed by "Prepare food sanitarily"2.48, "Do not skip breakfast"2.29, "Eat a variety of vegetables, fruits, dairy products daily"2.25, "Drink water instead of beverage"2.10, "Choose less fried foods"2.09 and "Maintain healthy weight"1.91. The exercise frequency of walking was not significantly different between groups; however, heavy exercise frequency was significantly lower in underweight group than the other groups (p < 0.05). The energy intake was 2153 kcal, which was 81.2% of the Estimate Energy Requirement, and the intake of calcium and vitamin $B_2$ was 66.7% and 77.8% of KDRIs. Particularly, the intake of iron, vitamin A and vitamin C was about 59.4%, 52.2% and 55.4% of KDRIs and INQ was 0.71, 0.63 and 0.65 respectively, and intake of folic acid fell behind 39.1% of KDRIs and INQ was 0.46. Our study suggests that the systematic and continuous nutrition education will have to be provided at schools to improve dietary and health behaviors and prevent chronic metabolic disease for students of specialized game high school.

• 동아시아식생활학회지
• /
• 제15권6호
• /
• pp.655-662
• /
• 2005

Body content bone mined density and nutrient intake status of 129 college women in Daegu area are analyze4 The mean age was 23.1 years. Bone mineral density was measured in their right heel by SONOST-2000 ultrasound bone densitometer, and nutrient intake was assessed by a Questionnaire. Diet intake data were obtained by using a 24 hours recall method to evaluate the subject's usual diet. The average energy, Ca, Ee, Zn and folate intakes were 64.2, 47.5, 54.7, 62.9 and $57.4\%$ of RDA, respectively. Ca/P and Ca/Protein ratio were 0.46 and 6.7, respectively. The mean adequacy ratio(MAR), an index of overall dietary quality wag 0.6. The index of nutritional quality was under 1.0 for protein(0.7), vitamin A(0.9), E(0.7), $B_1(0.8)$, niacin(0.8), $B_6(0.6)$ and phosphorus(0.6). The less the protein and energy intake, the less the bone mineral density(p<0.05). The intakes of protein(p<0.05) and that of phosphorus(p<0.001) were positively correlated with bone quality index(BQI). The calcium intake was positively correlated with Z-score(p<0.05). The phosphorus intake was positively correlated with T-score(p<0.001) and Z-score(p<0.0001). In conclusion, this study indicates that nutrient intake of the college women is considerably lower than the RDA. Also the BQI is lower than standard.

• 공학교육연구
• /
• 제26권4호
• /
• pp.22-35
• /
• 2023

As information and communication technology has developed remarkably, it has become possible to analyze various types of large-volume data generated at a speed close to real time, and based on this, reliable value creation has become possible. Such big data analysis is becoming an important means of supporting decision-making based on scientific figures. The purpose of this study is to develop a big data analysis tool that can analyze large amounts of data generated through engineering education. The tasks of this study are as follows. First, a database is designed to store the information of entries in the National Creative Capstone Design Contest. Second, the pre-processing process is checked for analysis with big data analysis tools. Finally, analyze the data using the developed big data analysis tool. In this study, 1,784 works submitted to the National Creative Comprehensive Design Contest from 2014 to 2019 were analyzed. As a result of selecting the top 10 words through topic analysis, 'robot' ranked first from 2014 to 2019, and energy, drones, ultrasound, solar energy, and IoT appeared with high frequency. This result seems to reflect the current core topics and technology trends of the 4th Industrial Revolution. In addition, it seems that due to the nature of the Capstone Design Contest, students majoring in electrical/electronic, computer/information and communication engineering, mechanical engineering, and chemical/new materials engineering who can submit complete products for problem solving were selected. The significance of this study is that the results of this study can be used in the field of engineering education as basic data for the development of educational contents and teaching methods that reflect industry and technology trends. Furthermore, it is expected that the results of big data analysis related to engineering education can be used as a means of preparing preemptive countermeasures in establishing education policies that reflect social changes.

• 비파괴검사학회지
• /
• 제26권2호
• /
• pp.84-89
• /
• 2006

레이저 초음파 검사 장치는 레이저빔을 이용하여 초음파 신호를 발생시키고 측정하는 비접촉식 결함 검사 장치이다. 이 장치는 펄스 레이저빔을 이용하여 광대역 주파수 범위를 갖는 초음파 신호를 발생시키고 작은 점으로 집속된 측정용 레이저빔을 이용하여 초음파 신호를 측정하므로 우수한 측정 분해능을 제공한다. 본 논문에서는 레이저 초음파의 표면파를 이용하여 표면 결함의 깊이를 측정하는 기법에 대한 연구를 수행하였다. 표면 결함은 깊이가 깊어질수록 차단 주파수 값이 작아지는 저주파 통과 필터 역할을 한다. 그리고 결함을 통과한 초음파 신호의 중심 주파수 값은 결함의 깊이에 따라 반비례적으로 작아진다. 본 논문에서는 표면 결함의 정규화 된 전달함수를 구한 다음 주파수 감쇠 성분을 이용하여 표면 결함의 깊이 정보를 추출하였고 표면 결함을 통과한 레이저 초음파 신호의 중심 주파수 값을 이용하여 결함의 릴이 정보를 추출하였다. 제안된 표면 결함 깊이 측정 방법은 초음파의 진폭 변화에 의한 결함 깊이 측정법보다 더욱 정밀한 정보를 제공하였다.