• 한국염색가공학회지
• /
• 제13권4호
• /
• pp.234-240
• /
• 2001

In order to improve the washing fastness of dyed polyester artificial suede fabric, it was dyed by using auto and anthraguinone type disperse dyes and treated with 3 different reduction clearing methods. The reduction clearing methods used in this study were normal alkaline reduction clearing, $N_2$ gas replacement method, and ultrasonic treatment during normal reduction clearing. The results were as followings ; The washing fastness property of dyed polyester artificial suede fabric was slightly improved by reduction clearing with $N_2$ gas replacement or with ultrasonic treatment comparing with normal alkaline reduction clearing. It was found that the use of $N_2$ gas replacement or ultrasonic treatment during reduction clearing eave effective removal of unfixed dyes on the fiber surface. We also obtained that the azo type disperse dye on polyester artificial fabric suede fabric showed higher wash fastness than anthraquinone type disperse dye.

• 치위생과학회지
• /
• 제23권1호
• /
• pp.13-19
• /
• 2023

Background: Periodontitis is a chronic inflammatory condition associated with dysbiosis of the oral microbiota. The aim of the present clinical study was to explore the adjunctive effect of ozonized water irrigation in the circuits of ultrasonic scalers for the full-mouth decontamination of patients with periodontitis Stage I or II. Methods: The study was a randomized, single-blinded, parallel-group clinical trial. The test group (n=25) was treated with ultrasonic scalers irrigated with ozonized water, whereas the control group (n=25) received normal tap water irrigation within the ultrasonic scalers used during the professional mechanical debridement. Full mouth plaque score, bleeding score, probing pocket depth, and the gingival index were evaluated at baseline, two, and 4 weeks after treatment. The pain perceived and dental anxiety were also assessed after treatment by means of the visual analog scale (VAS). Results: All periodontal parameters resulted in significant improvement for both study groups. The effect of the treatment group on the gingival index was significant, in particular, patients in the test group experienced a greater reduction in this score. No significant differences could be observed with regards to the average probing depth, full mouth plaque index and bleeding score. Patients treated with ozonized water running in the circuits of ultrasonic scalers displayed also lower scores for pain and dental anxiety. Conclusion: The present study showed a significant clinical effect on gingival inflammation attributable to adjunctive ozone irrigation during nonsurgical periodontal therapy. Further studies, including patients with severe periodontitis and greater sample sizes, are recommended to test the clinical effect of ozonized water in the circuits of ultrasonic scalers.

• 한국환경과학회지
• /
• 제16권2호
• /
• pp.211-218
• /
• 2007

The objectives of this study have been carried out to investigate the solubilization of municipal sewage sludge by single and dual frequency ultrasonic pretreatment, and the methane production characteristics of pretreated sewage sludge by specific methanogenic activity test for sewage sludge reduction. The waste activated sludge was collected from thickened tank of Suyoung sewage treatment plant in Busan city, and its concentration was adjusted to 1.0% total solids. Ultrasonic frequency was varied 15, 20, 15+20 kHz, and acoustic density was used a maximum 176W/L. The dual frequency ultrasonic pretreatment was found to be more effective than single frequency ultrasonic in the solubilization rate and methane production. The $SCOD_{Cr}/TCOD_{Cr}$, rate were 15.2%, 13.9%, 17.0% with single frequency of 15 kH2, 20 kHz, dual frequency of 15+20 kHz, respectively. The application of dual frequency ultrasound for sewage sludge pretreatment can be interest for sewage treatment plants having problems in sludge treatment and disposal.

• 유기물자원화
• /
• 제9권1호
• /
• pp.90-98
• /
• 2001

혐기성소화공정에서 슬러지의 용해가 전체 반응속도를 제한하고 있다. 용해율 향상을 위해 산(pH1.5, 3, 4, 5) 및 알칼리처리(pH9, 10, 13), 열처리(50, 100, 150, $200^{\circ}C$) 및 초음파처리(400W, 20kHz, 15, 20, 25, 30. 35, 40, 50, 60min)가 각 조건에서 실시되어 아래의 결과를 얻었다. 용해효과는 SCOD기준으로 무처리에 비해 산처리는 효과가 매우 낮았고, 알칼리처리는 pH13에서 986%, 열처리는 $200^{\circ}C$에서 959%, 초음파처리는 처리시간 35분에서 온도고정의 경우 802%, 온도 무고정의 경우 1123%의 높은 효과를 나타내어, 초음파처리가 가장 효과적이었다. VS/SS비율은 전처리에 따른 용해율과 정의 상관성을 가져, 용해율 효과의 지표로써 이용 가능했다. 총가스발생량은 열처리 $200^{\circ}C$가 무처리에 비해 1.8배, 열처리 $150^{\circ}C$가 1.4배, pH9의 알칼리처리가 1.2배, 온도 무고정 초음파 90분처리가 1.3배의 가스증산 효과를 나타내어, 열처리의 경우가 가장 효과적이었다. 또한 초음파처리의 경우, 온도고정보다 무고정의 경우가 저온 열처리의 동시효과가 있어 보다 효과적이었다.

• 유기물자원화
• /
• 제17권1호
• /
• pp.96-102
• /
• 2009

본 연구에서는 혐기성 소화 성능 향상을 위해 초음파 및 알칼리 전처리에 의한 폐활성 슬러지의 가용화 효과를 조사하였다. 초음파 및 알칼리 전처리는 세포벽의 파괴로 인하여 모세관 흡입 시간을 증가시킬 뿐만 아니라 상등액의 용존성 화학적 산소요구량, 단백질 및 탁도 농도를 증가키는 것으로 나타났다. 알칼리와 초음파 전처리를 병행한 슬러지 가용화가 초음파 전처리만을 수행한 경우에 비해 용존성 화학적 산소요구량과 단백질 증가가 높은 것으로 나타났다. 알칼리와 초음파 전처리를 동시에 수행한 경우 폐활성 슬러지의 고형물 농도 증가에 따라 가용화 효율이 감소하는 것으로 조사되었다.

• Journal of Dairy Science and Biotechnology
• /
• 제36권4호
• /
• pp.220-225
• /
• 2018

프로바이오틱스의 배양 및 동결건조 과정에서 프로바이오틱스가 사멸하지 않을 정도의 초음파 처리를 통하여 프로바이오틱스의 생존율 및 안정성이 높아지고, 코팅제가 골고루 분산되어 코팅 효율이 높아져 프로바이오틱스의 유통안정성 및 소화 생존율이 개선됨을 확인하였다.

• 유기물자원화
• /
• 제26권2호
• /
• pp.53-63
• /
• 2018

가수분해반응에서 율속 단계가 되어 수리학적 체류시간이 길어지고 처리 효율이 떨어지며 불안정한 처리 및 대규모 소화조 크기에 문제가 발생한다. 따라서 처리효율을 높이기 위해서는 하수 슬러지를 방해하는 요소들에 대해 혐기성 소화를 최소화하기 위한 전처리가 필요하며, 본 연구에서는 폐수 처리공정에서 초음파 및 알칼리 처리를 이용한 하수 슬러지의 분해 및 전처리효과를 검토하였다. 초음파 및 알칼리 전처리를 사용한 폐활성슬러지에 대한 혐기성 생분해도 분석결과 지체기의 시간이 감소하는 동안 누적 메탄 생산 및 메탄 생성 속도가 증가하였다. 따라서 초음파 및 알칼리 전처리를 이용한 하수 슬러지의 전처리는 율속단계를 작용하는 가수분해단계에서 지체기를 포함한 반응 시간을 줄이고 메탄 생산 속도 및 최종 메탄 수율을 증가시켜 효과적으로 가속화할 수 있다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.41-46
• /
• 2002

The general purpose of this paper is Evaluation of material properties in spring steels by investigate correlation between ultrasonic attenuation and virker's hardness, charpy impact properties, microstructures. The three test speciments of the $490{\times}90 mm$ plates and 20 mm thick are used but differ in heat treatment, one is rolled plate, the second is quenched and then tempered, and the third is quenched. ultrasonic attenuation were obtained at fifteen locations on the plates. In order to investigate the correlation between hardness ( especially, HV ) and the attenuation, the virker's hardness and the microstructures were observed for three spring steels. also the charpy impact test were carried out at the room temperature in order to investigate the relationship between impact properties and the attenuation. The experimental results obtained from three different spring related to the heat treatment conditions and attenuation coefficient is increased with increasing the hardness(HV). Ultrasonic attenuation coefficients have shawn are ability to distinguish among spring steels.

• 소성∙가공
• /
• 제33권2호
• /
• pp.118-122
• /
• 2024

Micro-electromechanical systems (MEMS) based in-situ heating holders have been developed to enable high resolution imaging of heat treatment analysis. However, unlike the standard 3 mm metal disk specimens used in the furnace-based heating holder and general transmission electron microscopy holder, the MEMS-based in-situ heating holder requires thin specimens that can be penetrated by electrons to be transferred onto the MEMS chip. Previously, focused ion beam milling was used to transfer metal specimens, but it has the disadvantage of being expensive and the risk of specimen damage due to gallium ions. Therefore, in this study, we devised a method of transferring metallic materials by ultrasonic treatment using a transmission electron microscopy specimen made by electro jet polishing. A 3mm electropolished metal disk was placed in an appropriate solution, ultrasonicated, and then drop casted. The transfer of the specimen was successful, but it was confirmed that dislocations were formed inside the specimen due to ultrasonic treatment. This study provides a novel method for transferring metallic materials onto MEMS chips, which is cost-effective and less gallium ion damaging to the specimen. The results of this study can be used to improve the efficiency of heat treatment analysis using MEMS-based in-situ heating holders.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권6호
• /
• pp.469-474
• /
• 2000

In order to enhance the degradation efficiency of waste activated sludge (WAS) by thermophilic aerobic digestion, an ultrasonic pretreatment was examined. It was observed that ultrasonic pretreatment increased the solubilization of organic matter in the WAS and that the solubilization ratio of the organics increased during the first 30 min but did not extensively increase thereafter. Therefore, a pretreatment time of 30 min was determined to be the economical pretreatment time from the experimental results. From the digestion experiments, which was conducted using the WAS collected from an oil refinery plant in Inchon, Korea, investigating the effects of an ultrasonic pretreatment on thermophilic aerobic digestion, it was confirmed that the proposed ultrasonic pretreatment was effective at enhancing the release of the cellular components in WAS and the degradation of released components in the thermophilic aerobic digestion.