• Macromolecular Research
• /
• 제12권6호
• /
• pp.559-563
• /
• 2004

Both the ultrasonic velocity at 3 MHz and the absorption coefficient in the frequency range from 0.2 to 2 MHz were measured for aqueous solutions of poly(sodium 4-styrenesulfonate) over the concentration range from 5 to $25\%$ (by weight). The pulse echo overlap method was employed to measure the ultrasonic velocity over the temperature range from 10 to $90^{\circ}C;$ the high-Q ultrasonic resonator method was used for the measurement of the absorption coefficient at $20^{\circ}C.$ The velocities exhibited their maximum values at ca. 55, 59, 63, 67, and $71^{\circ}C.$ for the 25, 20, 15, 10, and $5\%$ solutions, respectively. The velocity increased with respect to the poly(sodium 4-styrene-sulfonate) concentration at a given temperature. A study of the concentration dependence of the both the relaxation frequency and amplitude indicated that the relaxation at ca. 200 kHz is related to structural fluctuations of the polymer molecules, such as the segmental motions of the polymer chains and that the relaxation at ca. 1 MHz resulted from the proton transfer reactions of the oxygen sites of $SO_3.$ Both the absorption and the shear viscosity increase upon increasing the polymer concentration, but they decrease upon increasing the temperature.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.773-777
• /
• 2011

Conventional ultrasonic thickness measurement is to be considered as the assumption that the ultrasonic velocity is known. In actual applications the velocity is often not well known and access is often limited to one side. This paper aims at determining the ultrasonic velocity and thickness of plates with parallel or wedged surfaces using contact measurements made on one surface only. For wedged plates the thickness at one point and the wedge angle are determined. Equations are used for determining the ultrasonic velocity, thickness and wedge angle of the plate based on the times-of-flight measured by two contact transducers coupled to one surface. The time-of-flight of the obliquely reflected longitudinal wave echo was measured as a function of the separation between the two transducers. In addition, a simulation was made for comparing the experimental data and a FEM image. Experiments and simulations were performed on flat and wedged plates of aluminium materials; the calculated results for the unknown quantities are generally agreed with them to some degree.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.26-30
• /
• 2011

In order to ship low & Intermediate level radioactive waste drums, which have been temporarily stored on site, to a disposal facility, their physical and chemical properties should be evaluated and proven to meet the acceptance guideline prior to their shipment. Ultrasonic velocity method, which has been used to estimate the strength of concrete, can be suggested to evaluate the compressive strength of solidified radioactive waste, which is one of the evaluated properties. The strength is estimated from acoustic velocity. However, a guided wave traveling along a drum is generated when applying ultrasonic method to the drum, and this makes it difficult to analyze the signal due to overlap between transmitted wave through the contents in drum and the guided wave. This paper reported feasibility of ultrasonic method to evaluate of the compressive strength of the solidified LLW. It is observed that the guide wave is greater than transmitted wave, and ultrasonic velocity could be estimated from transmitted wave signal arriving prior to the guided wave

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1281-1290
• /
• 2001

A study on the fluid flow with ultrasonic forcing is carried out to obtain data for the turbulence enhancement. A large water tank is made of the transparent acrylic plates and a horizontal flow field is given by setting two acrylic tubes to face mutually on a horizontal line. A 2-dimensional PlV system which is composed of a continuous-output 4W Argon-ion laser, a high-speed video camera, a PC based by an image grabber and a high resolution monitor is used to investigate characteristics of the complex turbulence flow field. And a 2MHz ultrasonic transducer is used fur ultrasonic vibration forcing. Some experiments are carried out at Reynolds numbers of 2,000 and 4,000 and at 7 angles of ultrasonic incidence. In results, the flew velocity vector distribution, kinetic energy and turbulence intensity in both cases of with and without ultrasonic forcing are examined, compared and discussed by using PIV measurement. It is clarified that the ultrasonic forcing into flow field is valid to obtain the turbulence enhancement.

• 비파괴검사학회지
• /
• 제26권5호
• /
• pp.336-342
• /
• 2006

축대칭 단축 응력은 이론적으로는 초음파 응력측정 기술에서 가장 단순한 대상이지만 두 횡파를 이용하는 기존의 초음파 복굴절 응력측정 기술은 축대칭 구조에서 사용되기 어렵다. 또한 선형 음탄성 이론에 근거한 초음파 진행거리 시간 측정방법 역시 적용에 한계가 있는 경우가 많은데 그 이유는 초음파 길이(ultrasonic length)와 재료의 음탄성 특성을 정확히 알아야 한다는 점 때문이다. 본 논문에서는 축대칭 구조의 고체내부에 축 응력이 존재할 때 나타나는 초음파 복굴절 특성을 음탄성 이론을 이용하여 분석하였다. 이를 위해 서로 다른 편광특성을 가지는 두개의 초음파가 축 방향으로 입사될 때 만들어지는 속도 변화를 음탄성 이론식으로부터 결정하고 이를 이용하여 축 응력과 복굴절 특성의 관계를 유도한 후 이 결과를 간단한 인장 실험결과로부터 검증하였다.

• 한국건축시공학회지
• /
• 제24권2호
• /
• pp.193-202
• /
• 2024

본 연구에서는 초음파 속도법을 콘크리트의 초기동해 피해를 진단하기 위한 방법으로서의 적용 가능성을 평가하기 위해 모르타르 시험체를 대상으로 각각 동결 깊이에 따른 압축강도와 초음파 펄스 속도를 측정하여 미세구조와 그 상관관계를 분석하였다. 그 결과, 동결 피해를 입은 모르타르 시험체와 피해를 입지 않은 시험체 간의 압축강도와 초음파 펄스 속도 값의 차이가 확연하게 나타났으며, 미세구조 분석을 통해 동결 깊이가 증가할수록 초기동해 피해를 더 많이 받아 압축강도와 초음파 펄스 속도가 감소하였다고 판단할 수 있었다. 회귀분석을 통해 상관관계를 분석한 결과, 추정식과 실험값과의 관계성을 나타내는 결정계수( R²)가 0.87로 얻어져 초기동해 피해 깊이에 따른 압축강도와 초음파 펄스 속도 사이의 상호 연관성이 존재하는 것으로 분석된다. 이에 따라 초음파 속도법을 통한 콘크리트의 초기동해 피해 진단이 가능하며, 그 피해 깊이를 정량적으로 진단하기 위해서는 향후 추가적인 연구가 필요할 것으로 판단된다.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.90-97
• /
• 1989

Austempered ductile cast iron (ADI) which has been recently developed shows good mechanical properties. These properties are related to the microstructure which is greatly affected by processing variables such as austempering time and temperature. In this study, the relationships between mechanical properties from impact test, and hardness test and the results from ultrasonic velocity measurement and electrical resistivity measurement are studied on the ADI samples which are heattreated at different austempering temperature and time. From the results, we conclude the followings. The ultrasonic velocity measurement could be used for the study of austempering reaction mechanism. The electrical resistivity measurement could be used as quality assurance technique for the ADI.

• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.616-621
• /
• 2003

There are various Non-Destructive Evaluation (NDE) techniques used for measurement of residual stresses in material, such as magnetic methods, X-ray diffraction, Ultrasonic velocity measurement etc. The capabilities, applications and limitations of these techniques for evaluation of cold work/plastic deformation were studied and compared. Mild steel plates were subjected to different degree of cold deformation and were analyzed by Magneto-mechanical Acoustic Emission (MAE), Barkhausen Noise (BN) and magnetic properties (hysteresis loop parameters analysis). Further, these specimens were analyzed by X-ray diffraction and ultrasonic velocity measurements. The microhardness measurement and microstructure studies of these cold worked plates were also carried out. The results of all these studies and comparison of different techniques are discussed in this paper.

• International Journal of Vascular Biomedical Engineering
• /
• 제1권1호
• /
• pp.3-12
• /
• 2003

Ultrasonic pulsed Doppler velocimetry has become a standard international method of classifying carotid disease. Because the measured angle adjusted velocity increases as the Doppler angle increases, examinations should be performed at a convenient standard Doppler examination angle. An angle of 60 degrees is achievable throughout most examinations. Multiple Doppler viewing angles allow the acquisition of velocity vectors during the cardiac cycle, revealing the complex velocity patterns. Ultrasonic velocimetry (whether Doppler or time domain) is based on changes in the phase of the ultrasound echo. Other examinations can be done based on the echo phase. Slow motions of organs such as the brain can be used to monitor changes in edema. Measurements of tissue strain due to the pulsatile filling of the arterioles. This plethysmographic imaging method can display differences in tissue perfusion because of different tissue types and changes in autonomic activity.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.279-284
• /
• 2008

The firmness of fruit is one of the most important quality factors and is highly correlated to the elastic modulus. In this study, the ultrasonic transmission method was applied to evaluate the elastic modulus of the apple. In order to transmit and receive the ultrasonic wave through the whole apple, the ultrasonic measurement setup consisted of ultrasonic pulser, two specially fabricated ultrasonic transducers for fruit and digital storage oscilloscope. Ultrasonic parameters such as ultrasonic wave velocity, apparent attenuation, and peak frequencies were analyzed. The elastic modulus of apple was measured by using compression test apparatus. The correlations between ultrasonic parameters and elastic modulus were analyzed. A multiple linear regression model describing the relationship between elastic modulus and ultrasonic parameters was proposed.