• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.968-974
• /
• 2006

We are moving into the era of ubiquitous computing. Ubiquitous Sensor Network (USN) is a base of such computing paradigm, where recognizing the identification and the position of objects is important. For the object identification, RFID tags are commonly used. For the object positioning, use of sensors such as laser and ultrasonic scanners is popular. Recently, there have been a few attempts to apply RFID technology in robot localization by replacing the sensors with RFID readers to achieve simpler and unified USN settings. However, RFID does not provide enough sensing accuracy for some USN applications such as robot navigation, mainly because of its inaccuracy in distance measurements. In this paper, we describe our approach on achieving accurate navigation using RFID. We solely rely on RFID mechanism for the localization by providing coordinate information through RFID tag installed floors. With the accurate positional information stored in the RFID tag, we complement coordinate errors accumulated during the wheel based robot navigation. We especially focus on how to distribute RFID tags (tag pattern) and how many to place (tag granularity) on the RFID tag-floor. To determine efficient tag granularities and tag patterns, we developed a simulation program. We define the error in navigation and use it to compare the effectiveness of the navigation. We analyze the simulation results to determine the efficient granularities and tag arrangement patterns that can improve the effectiveness of RFID navigation in general.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.4
• /
• pp.338-344
• /
• 2010

This paper discusses the development of the control system of a mini quadrotor in Konkuk University for indoor applications. The attitude control system consists of a stability augmentation system, which acts as the inner loop control, and a modern control approach based on modeling will be implemented as the outer loop. The inner loop control was experimentally satisfied by a proportional-derivative controller; this was used to support the flight test in order to validate the modeling. This paper introduces the mathematical model for the simulation and design of the optimal control on the outer loop control. To perform the experimental tests, basic electronic hardware was developed using simple configurations; a microcontroller used as the embedded controller, a low-cost 100 Hz inertial sensors used for the inertial sensing, infra-red sensors were employed for horizontal ranging, an ultrasonic sensor was used for ground ranging and a high performance propeller system built on an quadrotor airframe was also employed. The results acquired from this compilation of hardware produced an automatic hovering ability of the system with ground control system support for the monitoring and fail-safe system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.2
• /
• pp.100-106
• /
• 2013

This paper presents design and control of an 'Omni-directional Cleaning Robot (OdCR)' which employs omni-wheels at three edges of its triangular configuration. Those omni-wheels enable the OdCR to move in any directions so that lateral movement is possible. For OdCR to be localized, a StarGazer sensor is used to provide accurate position and heading angle based on landmarks on the ceiling. In addition to that, ultrasonic sensors are installed to detect obstacles around OdCR's way. Experimental studies are conducted to test the functionality of the system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.8
• /
• pp.585-591
• /
• 2003

A virtual force is generated and fed back to the operator to make the teleoperation more reliable, which reflects the relationship between a slave robot and an uncertain remote environment as a form of an impedance. In general, for the teleoperation, the teleoperated mobile robot takes pictures of the remote environment and sends the visual information back to the operator over the Internet. Because of the limitations of communication bandwidth and narrow view-angles of camera, it is not possible to watch certain regions, for examples, the shadow and curved areas. To overcome this problem, a virtual force is generated according to both the distance between the obstacle and the robot and the approaching velocity of the obstacle w.r.t the collision vector based on the ultrasonic sensor data. This virtual force is transferred back to the master (two degrees of freedom joystick) over the Internet to enable a human operator to estimate the position of obstacle at the remote site. By holding this master, in spite of limited visual information, the operator can feel the spatial sense against the remote environment. It is demonstrated by experiments that this collision vector based haptic reflection improves the performance of teleoperated mobile robot significantly.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.417-420
• /
• 2005

The spirometer is a medical device that measures the instantaneous velocity of the respiratory gas flow capacity. It is used for testing the condition of the lung and patient monitoring. It measures the absolute capacity difference that includes the flow capacity signal. In this paper, by using an ultrasound sensor that reduce the error caused by the inertia and pressure it has improved the transmission and receiving signal. This has enabled patients with weal respiratory to use the spirometer. Also, by using the embedded hardware system, a precise and prompt detection system was implemented.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.3
• /
• pp.239-242
• /
• 2015

In this paper, we propose a walking assisting system for blind people using Android smartphone and Arduino board. In our proposed system, we use an Android smartphone case and an external ultrasonic sensor to detect the obstacles ahead. In this manner, blind people is able to aware unexpected objects by smartphone speakers or vibration functionality. In addition, the walking assisting system is also designed a notice system which will be triggered by built-in smartphone camera flash when blind people walk in some darkness place. The experimental results from real experiments on blind people have demonstrated the applicability of our walking assisting system, when it not only efficiently helps blind people avoid obstacles ahead but also possible traffic collisions in darkness condition.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.497-502
• /
• 2010

The accurate estimation of position and direction of the mobile robot is essential for preparing precise movement and works in the inner complex environment. In this paper, we propose a robust estimation method of location and direction using the velocity of mobile robot in the inner GPS environment. The estimation using the inner GPS with ultrasonic sensors have to consider with various acoustic noise and sensor errors. We design a robust estimation method using a membership function based on uncertainty of the obtained information and robot velocity. The simulation results of the proposed method show effectiveness in the contaminated environment with position errors.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1275-1280
• /
• 2018

We made a smartphone interlocking location tracking streetlight and remote display device to compensate the defect of real time identifiable CCTV streetlights and child safety notification applications. It controls brightness of LED by detecting the surrounding brightness and objects with ultrasonic sensor and illuminance senor. The CCTV receives the location of smartphone by Bluetooth and takes the target of the location. It realizes a wireless transmission system that the video is upload to the tablet PC via WiFi.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.15-18
• /
• 2009

지능형 휠체어 구현에 있어 초음파 센서의 배열은 전동휠체어가 장애물을 감지할 수 있는 능력을 결정한다. 따라서 본 논문에서는 지능형 휠체어의 장애물 감지를 위한 초음파 센서의 효과적인 배열 방법을 제안한다. 초음파 센서 모듈은 총 10개의 4개 세트로 구성되어 있다. 전동 휠체어의 전방, 좌, 우측에는 각각 3개의 센서를 48도씩 중첩되게 겹쳐 하나의 세트로 구성하고, 후방에는 하나의 센서를 구성한다. 지능형 휠체어는 사용자 인터페이스, 장애물 회피 모듈, 모터 제어 모듈, 초음파 센서 모듈로 구성된다. 사용자 인터페이스는 정해진 명령을 하달 받고, 모터 제어 모듈은 하달된 명령과 센서들에 의해 반환된 장애물과의 거리 정보로 모터제어보드에 연결되어 있는 두 개의 좌우 모터들을 조종한다. 센서 모듈은 전동휠체어가 움직이는 동안에 주기적으로 센서들로부터 거리 값을 반환 받아 벽 또는 장애물을 감지하여 장애물의 위치를 사용자 인터페이스를 통해서 알려 주고, 또한 장애물 회피 모듈에 의해 장애물을 우회 하도록 움직인다. 제안된 방법의 센서 배열은 실험을 통해 지능형 휠체어가 임의로 설치된 장애물을 효과적으로 감지하고 보다 정확하게 장애물을 회피 할 수 있음을 보였다.