• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.284-288
• /
• 2003

In this paper, a mobile robot system which have trajectory of metal tape- type is designed and manufactured. The mobile robot for manless-transportation consists of sensor-part with ultrasonic and infrared sensor, motor-part with motor and encoder, user interface-part, central control-part and computer interface-part. The ultrasonic sensor detects obstacles which can appear during the mobile robot is move. The infrared sensor has ability which detect the metal tape trajectory and then lead the robot to a correct position. By using the mobile robot, the flexiblity of a moving trajectory is improved and cost which can happen in using a mobile robot system having trajectory is cut as well.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.2902-2912
• /
• 1994

The ultrasonic array sensor system, consisting of one transmitter and fourreceivers instead of the traditional combination of a transmitter and a receiver is proposed in order to identify the location of objects. From the theoretical analysis and the experimental results, it is found that this new array sensor system could derive the information on the position of objects accurately, while the traditional sensor system could provide only the informatioin on the distance to objects. This sensor system is used to develop a sonar-based local mapping algorithm. The local map is used to find the existence of possible gates, through which the mobile robots can pass, and to select the suitable one in order for the robots to reach the goal safely in the presence of obstacles. The performance of the proposed local map algorithm is demonstrated experimentally in a small working area with several obstacles. It is found that the quality of the resulting local map is sufficient for the avoidance of collisions between the robots and obstacles and for the selection of the suitable gate leading to the goal. It is also shown that the global map of the working area could be obtained by integrating several local maps constructed from different locations and that it matches the actual layout of the working area well.

• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.116-124
• /
• 2005

In this paper range measurement systems are designed using an ultrasonic sensor and a camera. An ultrasonic sensor provides the range measurement to a target quickly and simply but its low resolution is a disadvantage. We tackle this problem by employing a camera. Instead using a stereoscopic sensor, which is widely used for 3D sensing but requires a computationally intensive stereo matching, the range is measured by focusing and structured lighting. In focusing a straightforward focusing measure named as MMDH(min-max difference in histogram) is proposed and compared with existing techniques. In the method of structure lighting, light stripes projected by a beam projector are used. Compared to those using a laser beam projector, the designed system can be constructed easily in a low-budget. The system equation is derived by analysing the sensor geometry. A sensing scenario using the systems designed is in two steps. First, when better accuracy is required, measurements by ultrasonic sensing and focusing of a camera are fused by MLE(maximum likelihood estimation). Second, when the target is in a range of particular interest, a range map of the target scene is obtained by using structured lighting technique. The systems designed showed measurement accuracy up to 0.3[mm] approximately in experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1400-1409
• /
• 2001

This paper describes a fiber optic sensor suitable for non-contact detection of ultrasonic waves. This sensor is based on a fiber optic Sagnac interferometer. Quadrature phase bias between two interfering laser beams in Sagnac loop is introduced by a polarization controller. A stable quadrature phase bias can be confirmed by observing the interferometer output versus phase bias. This method eliminates a digital signal processing for detection of ultrasonic waves using Sagnac interferometer. Interference intensity is affected by the frequency of ultrasonic waves and the time delay of Sagnac loop. Collimator is attached to the end of the probing fiber to focus the light beam onto the specimen surface and to collect the reflected light back into the fiber probe. Ultrasonic waves produced by conventional ultrasonic transducers are detected. This fiber optic sensor based on Sagnac interferometer is very effective for detection of small displacement with high frequency such as ultrasonic waves used in conventional non-destructive testing.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.840-848
• /
• 1995

A new tri-aural ultrasonic sensor system is suggested to build more accurate world maps for mobile robots with less scanning. In ordinary single sensor systems, the inherent beam-width of sonar transmitter causes ambiguity in sensing direction. Dual sensors may be used to discriminate plane and corner with several scans. However, the proposed method uses triple sensors, and achieves more accuracy with less scanning.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.34.6-34
• /
• 2002

1. Introduction 2. System Configuration 2.1 Control System 2.1.1 Longitudinal control 2.1.2 Lateral control 2.2 Sensor System 2.2.1 Photo interrupt 2.2.2 Ultrasonic sensor 2.3 Vision system 2.4 Communication system 2.4.1 Data communication 2.4.2 Image Communication 3. Test and Result 3.1 Vision test 3.2 Ultrasonic sensor test 4. Conculsion. Acknowledgment References.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.348-354
• /
• 2011

Mobile robots performed various missions in various environments. In order to move to target precisely, the mobile robots need a precise position sensing system In this paper, a new high precision docking sensor is proposed. Proposed docking sensor consists of linear CCD(charge coupled device) sensor and ultrasonic sensors. The docking sensor system can measure lateral position(X), longitudinal position(Y) and angle(${\theta}$) between the sensor and flat target with simple mark. Two ultrasonic sensors measure two distances which can be converted to longitudinal position and angle. Linear CCD sensor measures lateral position using center mark of the target. To verify performance of the sensor, the sensor is applied to an omnidirectional mobile robot. Several experimental results show highly precise performance of the sensor. Repeatability of the docking sensor is less than 1mm and $0.2^{\circ}$. Proposed docking sensor can be applied for precise docking of mobile robot.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1040-1047
• /
• 2011

This paper proposes a novel method based on error back propagation neural networks to fuse laser sensor data and ultrasonic sensor data for enhancing the accuracy of mapping. For navigation of single robot, the robot has to know its initial position and accurate environment information around it. However, due to the inherent properties of sensors, each sensor has its own advantages and drawbacks. In our system, the robot equipped with seven ultrasonic sensors and a laser sensor navigates to map two different corridor environments. The experimental results show the effectiveness of the heterogeneous sensor fusion using an error backpropagation algorithm for mapping.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.157-167
• /
• 2011

Although vehicles become more intelligent for convenience and safety of drivers, traffic accidents are increased more and more. Especially, car-to-car single rear impacts in the urban area are increased rapidly because of driver inattention. To prevent rear impacts in the urban area, commercial automobile vendor applies the low-speed short-distance collision warning system. This paper presents low-speed short-distance collision warning algorithm for the city driving by using sensor fusion of laser sensor and ultrasonic sensor. An experiment using embedded microprocessor in the driving track was used to demonstrate the feasibility of the collision warning algorithm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.2
• /
• pp.47-52
• /
• 2010

Miniaturization and lightweight are increasingly the recent trend in the manufacture of electric appliances and machine parts. So technology of micro joining for joining materials is indispensable. This paper gives a description of an experimental study of the ultrasonic welding of metals. In ultrasonic metal welding, high frequency vibrations are combined with pressure to join two materials together quickly and securely, without producing significant amount of heat. Ultrasonic metal welder consists of Transducer, Booster, and Horn that are designed very accurately to get the natural frequencies and vibration mode. In this study, The horn was designed and analyzed the natural frequency by the modal analysis and harmonic analysis. And using a fiber optic sensor, we measured the amplitude and analyzed the Fast Fourier Transformed result. Using the horn, Ultrasonic metal welding between Ni sheet and Ni sheet of 0.1mm thickness was accomplished under the optimal conditions of static pressure 0.15MPa, vibration amplitude 45% and welding time of 0.28s. This result can be used for ultrasonic metal welding in manufacturing industry.