• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.285-291
• /
• 2003

Ultrasonic vibrator is an equipment which atomizes and homogenization the oils by breaking the oil particles with ultrasonic cavitation, and would improve the properties. The present study deal with the ultrasonic breaking systems which recycle the shipborne waste oil into usable oil to be burnt. The first place, experimental studies were carried out to investigate the homogenizing effect of the waste oils by ultrasonic cavitation. Variation of the properties(viscosity, specific gravity and pH) and the matrix structures for the various shipborne waste oils were interpreted to analyse the breaking, dispersion effects by ultrasonic cavitation. The experimental results can be useful to the development of waste oil disposing systems.

• Tribology and Lubricants
• /
• 제22권4호
• /
• pp.218-224
• /
• 2006

The sludge oils were produced necessarily in the ships operation, so that it will be the best way to manage the sludge oils inside ship itself from a viewpoint of the prevention of marine oil pollution. The ultra-sonic breaking system which recycle the sludge oil from ship into usable oil to be brunt is recognized as a most possible recycling device. In this regards, the purpose of this study is to examine erosion damage,on the SS400 specimen by cavitation and the effect of impact pressure generated from the demolition of the cavity of ultrasonic vibration in the marine sludge oil environment.. The erosion damage of specimen was investigated mainly on weight loss, weight loss rate and maximum erosion rate with variation of the oil temperature as well as the change of space between transducer hem and specimen. The experimental results showed that as the space between ultrasonic vibrator horn and specimen disk increased, the weight loss and weight loss rate decreased and the values were larger in SFO than in SLO. The experimental results can be useful to the development of sludge oil disposing systems and to consider a countermeasure for the prevention of erosion damages by cavitation.

• Journal of Forest and Environmental Science
• /
• 제23권2호
• /
• pp.73-78
• /
• 2007

Ultrasonic deinkings of white ledger were carried out to confirm whether the ink removal efficiency and pulp qualities can be improved by the ultrasonic deinking. The effects of conventional pulping and ultrasonic treatment of white ledger on the ink particle size distribution and ink removal coefficient were compared. The physical properties of paper, energy consumption and effluent qualities were measured. The ultrasonic treatment of white ledger resulted in the ink particle size distribution suitable for flotation. The ink removal efficiency, brightness, breaking length and effluent quality were improved by the ultrasonic deinking. It is expected that the competitiveness of ultrasonic deinking system can be improved by the optimization of treatment condition.

• 비파괴검사학회지
• /
• 제26권2호
• /
• pp.84-89
• /
• 2006

레이저 초음파 검사 장치는 레이저빔을 이용하여 초음파 신호를 발생시키고 측정하는 비접촉식 결함 검사 장치이다. 이 장치는 펄스 레이저빔을 이용하여 광대역 주파수 범위를 갖는 초음파 신호를 발생시키고 작은 점으로 집속된 측정용 레이저빔을 이용하여 초음파 신호를 측정하므로 우수한 측정 분해능을 제공한다. 본 논문에서는 레이저 초음파의 표면파를 이용하여 표면 결함의 깊이를 측정하는 기법에 대한 연구를 수행하였다. 표면 결함은 깊이가 깊어질수록 차단 주파수 값이 작아지는 저주파 통과 필터 역할을 한다. 그리고 결함을 통과한 초음파 신호의 중심 주파수 값은 결함의 깊이에 따라 반비례적으로 작아진다. 본 논문에서는 표면 결함의 정규화 된 전달함수를 구한 다음 주파수 감쇠 성분을 이용하여 표면 결함의 깊이 정보를 추출하였고 표면 결함을 통과한 레이저 초음파 신호의 중심 주파수 값을 이용하여 결함의 릴이 정보를 추출하였다. 제안된 표면 결함 깊이 측정 방법은 초음파의 진폭 변화에 의한 결함 깊이 측정법보다 더욱 정밀한 정보를 제공하였다.

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.67-78
• /
• 1999

Recently, a greater part of all ship use a coarse heavy fuel oil(HFO) over specific gravity(S.G) 1.00/15$^{\circ}C$ and viscosity 3,500 cSt/4$0^{\circ}C$ as the fuel oil of marine boiler or internal combustion engine from the viewpoint of economical ship' operation. The greater plan to improve a combustion methods of heavy fuel oil, such as atomization, homogeneity and emulsification, were contrived and carried out newly, and then applied 20kHz ultrasonic homogenizer to one of test methods. Also, adopted the marine oils(fuel oil and lubricating oil etc.) and sludge oil as test solutions, and its matrix structures were examined with photographs, Especially, it is important at control system of oil pollution, for the sludge oil emulsified, to be recycled as fuel oil of boiler according to 20kHz Ultrasonic homozenizer, and then fuel saving is attained effectively by making sludge oil to be burnt.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 추계학술발표회
• /
• pp.157-162
• /
• 2003

슬러지유는 선박의 운용상 필연적으로 발생된다. 따라서 선박으로부터의 기름오염을 방지하는 견지에서 본다면, 발생된 슬러지유를 선박내에서 자체처리하는 것이 가장 좋은 방법이 될 수 있을 것이다. 선박에서 발생되는 슬러지유를 연소가 가능한 기름으로 재활용할 수 있는 초음파 분쇄 시스템은 가장 현설성 있는 재활용 장치로 알려져 있다. 이러한 관점에서, 이 연구는 선박 슬러지유 환경에서 캐비데이션에 의하여 일반강(SS400)에 미치는 침식손상과 초음파 진동 캐비티의 붕괴로 인해 발생되는 충격압의 영향에 대해 고찰하는 것에 목적을 두고 있다. 시험편의 침식손상은 유온의 변화와 더불어 시험편과 진동자 혼과의 간격을 변화시키면서 주로 무게감소량, 무게감소율 그리고 최고 침식율을 대상으로 살펴보았다. 실험결과 초음파 진동자 흔과 시험편과의 간격이 커짐에 따라 무게감소량과 무게감소율이 감소되었고, 그 차이는 연료유 슬러지(SFO)에서가 윤찰유 슬러지(SLO)에서보다 켰다. 이러한 실험결과는 슬러지유 처리 시스템을 개발하고, 캐비테이션으로 인한 침식손상 방지 대책을 고려하는데 있어서 활용될 수 있을 것이다.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.27-33
• /
• 1997

A neural network approach has been developed to determine the depth of a surface breaking crack in a steel plate from ultrasonic backscattering data. The network is trained by the use of feedforward three-layered network together with a back-scattering algorithm for error correction. The signal used for crack insonification is a mode converted 70$^{\circ}$transverse wave. A numerical analysis of back scattered field is carried out based on elastic wave theory, by the use of the boundary element method. The numerical data are calibrated by comparison with experimental data. The numerical analysis provides synthetic data for the training of the network. The training data have been calculated for cracks with specified increments of the crack depth. The performance of the network has been tested on other synthetic data and experimental data which are different from the training data.