• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1157-1158
• /
• 2006

Internally nitrided dilute W-Ti alloy specimens having a heavily deformed surface microstructure were prepared by a multi-step internal nitriding at 1573-2073 K. Primary nitriding below their recrystallization temperature induced a precipitation of ultrafine TiN particles. After secondary and tertiary nitriding, those precipitates grew into rod-like TiN with a length of 20-60 nm. The recrystallization temperature after nitriding was elevated above 2073 K. The yield strength at 1773 K obtained from nitrided W-0.5 mass% Ti alloy was about 5 times as large as that of the recrystallized specimen. DBTT of the nitrided alloys was about 373 K.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.684-692
• /
• 1990

Ultrafine magnetite powder for the ferromagnetic fluid was prepared by an addition of alkaline solution to the solution containing Fe2+ and Fe3+ ions at 6$0^{\circ}C$. The optimum condition of the magnetite synthesis was delineated by examining such various physico-chemical properties as Fe2+/Fe+3 ratio in the powder, phase characteristics, MHC and $\sigma$max. A new scheme for the steric stabilization of colloidal dispersion was proposed using the concept of the buffer group action for the increased interfacial density of the stabilizing moieties at colloid particle/dispersion medium interface. The proposed concept was successfully applied to the preparation of the kinetically stable kerosinebased ferrofluid using Tween and Span as dispersants. In the dispersion of magnetite particles in a kerosine, Tween(polyoxyethylene sorbitan oleate) acts as a primary stabilizer which provides an anchor group, whereas Span(sorbitan oleate) can be classified as a secondary stabilizer which adsorbs on the surface of magnetite particle through the action of the buffer group. Dispersion studies using various quantities of Tween and Span supported the concept of the buffer group action for increased dispersion characteristics of the kerosine based ferromagnetic fluid.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.420-421
• /
• 2006

In the present study, ultrafined Zr-V-Fe based alloy powder prepared by a plasma arc discharge process with changing process parameters. The chemical composition of synthesized powder was strongly influenced by the process parameters, especially the hydrogen volume fraction in the powder synthesis atmosphere. The synthesized powder had an average particle size of 50 nm. The synthesized Zr-V-Fe based particles had a shell-core structure composed of metal in the core and oxidse in the shell.

• 한국결정성장학회지
• /
• 제9권6호
• /
• pp.563-569
• /
• 1999

수평형 반응로에서 $TMS[Si(CH_3)_4]-H_2$ 와 H$_2$가스를 이용하여 SiC 초미분말 합성시 최적 공정 조건을 알아보기 위하여 수치모사방법을 이용하였다. 이론적인 해석 결과, 반응온도가 증가함에 따라 TMS의 전환률은 증가하였지만, 수소유량이 증가함에 따라서는 TMS 전환률이 감소하였다. 또한 반응온도가 높을수록 기상의 충돌확률이 증가하여 최종 생성된 SiC 입자농도는 감소하였지만, 수소유량과 TMS 농도가 증가하는 경우에서는 생성된 입자농도가 증가하였다. 한편 입자크기는 반응온도와 초기 TMS 농도가 증가함에 따라 증가하였지만 수소유량이 증가하는 결향을 나타내었다. 이러한 반응온도, 수소유량 및 TMS 농도에 따른 입자크기 변화는 실제 실한 결과와 이론적으로 고찰한 결과가 일치하였다.

• 한국입자에어로졸학회지
• /
• 제10권3호
• /
• pp.119-130
• /
• 2014

Home is a major living environment of children. In urban area, indoor air at home could be severely influenced by combustion sources such as vehicle exhaust and cooking. In this work, the air quality of a high-rise apartment was investigated by monitoring combustion-related air pollutants at both indoor and outdoor in winter of 2014. From 48-h continuous monitoring data, large amount of $NO_x$ was observed at the balcony of the high-rise apartment during the morning traffic hours. It deteriorated indoor air quality of the apartment. During the cooking activity, high peak episodes of ultrafine particles were seen. It was concluded that effects of vehicle exhaust and cooking activity on the indoor air of the high-rise apartment could be easily checked by $NO_x$ and ultrafine particle indicators, respectively.

• Toxicological Research
• /
• 제30권2호
• /
• pp.83-90
• /
• 2014

An increasing number of recent studies have focused on the impact of particulate matter on human health. As a model for atmospheric particulate inhalation, we investigated the effects of inhaled carbon black nanoparticles (CBNP) on mice with bleomycin-induced pulmonary fibrosis. The CNBPs were generated by a novel aerosolization process, and the mice were exposed to the aerosol for 4 hours. We found that CBNP inhalation exacerbated lung inflammation, as evidenced by histopathology analysis and by the expression levels of interleukin-6 protein, fibronectin, and interferon-${\gamma}$ mRNAs in lung tissues. Notably, fibronectin mRNA expression showed a statistically significant increase in expression after CBNP exposure. These data suggest that the concentration of CBNPs delivered (calculated to be $12.5{\mu}g/m^3$) can aggravate lung inflammation in mice. Our results also suggest that the inhalation of ultrafine particles like PM 2.5 is an impactful environmental risk factor for humans, particularly in susceptible populations with predisposing lung conditions.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.455-462
• /
• 2002

The microstructures and properties of TiC dispersed nickel-base alloy were studied in this work. The alloy prepared by powder metallurgical processing was solution treated, 1st-aged at $880^{\circ}C$ for 16 hours, and then 2nd-aged at $760^{\circ}C$ for 4 hours. Microstucture of sintered specimen showed that TiC particles are uniformly dispersed in Ni base alloy. In the specimen aged at $880^{\circ}C$ for 8 hours, the fine $\gammaNi_3$(Al,Ti) precipitates with round shape are observed and the very fine $\gammaNi_3$(Al,Ti) particles with round shape are precipitated in the specimen aged at $760^{\circ}C$ for 4 hours. The presence of ${\gamma}$precipitates in TiC/Ni base alloy increased the hardness and wear resistance of the specimen. The hardness and wear resistance of the Ni-base with TiC are higher than those of conventional Ni-base superalloy X-750 because of dispersion strengthening of TiC particles. The hardness, transverse rupture strength and resistance of the specimen 2nd-aged at $760^{\circ}C$ for 4 hours are higher than those of 1st-aged specimen due to ultrafine $\gammaNi_3$(Al,Ti) precipitates.

• 대한기계학회논문집B
• /
• 제41권4호
• /
• pp.221-228
• /
• 2017

본 연구에서는 부엌이나 밀폐 작업장과 같이 PM2.5 초미세먼지가 고농도로 발생하는 장소에 적용 가능한 무필터 초미세먼지 정화기술을 제안하고자 한다. 이런 장소에서는 기존 필터기반의 공기정화기는 높은 필터교체비용으로 인해 적용이 불가능하여 작업자가 고농도 PM2.5 초미세먼지에 직접 노출되는 심각한 문제가 있다. 입자가 수 마이크론의 크기로 성장하면 증가한 관성으로 쉽게 제거가능하기 때문에 본 연구에서는 초미세먼지의 응축성장에 집중하였다. 물분무를 이용하는 공기포화기, 수증기를 응축시켜 입자를 성장시키는 응축기, 멀티임팩터 제거기로 구성된 시제품을 개발하였고 낮은 유량의 랩스케일 실험에서 실제 공기청정기 유량 조건에서 그 성능을 검증하였다.

• 공업화학
• /
• 제3권3호
• /
• pp.522-526
• /
• 1992

반응온도 $10^{\circ}C$하에서 수산화칼슘 수용액에 $CO_2$ 가스를 흡수시켜 탄산화반응을 행하였으며 비정질탄산칼슘의 생성과 전이과정을 조사하였다. 생성된 비정질탄산칼슘은 입경 약 $0.02{\sim}0.05{\mu}m$ 정도인 구형의 초미립자로서 소량의 부착수를 포함고, $HCO^-_3$ 이온이 일부 치환된 비화학양론적인 물질이었다. 이 물질은 매우 불안정하여 반응액 내에서 쉽게 안정한 calcite로 전이하게 되는데 반응액 내의 탄산기가 $CO_3^{2-}$ 이온 지배적인 경우에는 연쇄상 calcite로 전이하였고, $HCO^-_3$ 이온 지배적인 경우에는 능면체 calcite로 전이하였다. 그러므로 비정질탄산칼슘의 전이과정을 적절히 제어함으로써 탄산칼슘 입자의 형태와 크기를 조절하는 것이 가능할 것으로 생각된다.

• 한국입자에어로졸학회지
• /
• 제8권4호
• /
• pp.151-160
• /
• 2012

Health effects caused by the ultrafine particles in ambient air are great concern to the public health, and the strict measuring and monitoring of the ambient aerosol are required. In this work, the characteristics of the aerosol size distribution in Pohang province are studied. Optical particle counters (Grimm APS 1108 and 1109) were used to measure the aerosol size distribution in the area. Locations near the national monitoring site located in the industrial and the residence area were selected for the measuring sites of this study, and the locations in border area between the industry and the residence were selected for the reference of the comparison. In the industry site, it is found that the concentration of aerosol particles near the size of 5 ${\mu}m$ appear characteristically and the fluctuations in concentration with respect to time are minimal. The mass concentration of the aerosol above 10 ${\mu}m$ in diameter in the industry area was found to fluctuate significantly. The mass portion of $PM_{10}$ and PM2.5 to TSP in the residence area were 83% and 51% respectively. In the industrial regional, it was found that the mass portion of PM10 and $PM_{2.5}$ to TSP were 76% and 35% respectively. In the boundary area the mass portion of $PM_{10}$ and $PM_{2.5}$ to TSP were 78% and 54% respectively.