• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.279-290
• /
• 2013

In this paper, we propose a transmission scheme of MAC protocol that enables secure voice communications by exploiting the wide spectrum and low signal strength characteristics of the ultra wide band technology. In addition, it also supports high level of terminal mobility by deploying mobile ad hoc network schemes. While most of existing UWB MAC protocols are operated as a synchronous mode, the proposed scheme operates in an asynchronous mode for supporting high mobility and sends voice packets without RTS/CTS control packets for efficient voice traffic transmission without retransmission. With simulation program, we prove that the proposed scheme satisfies the required voice quality and packet delivery time.

• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.386-393
• /
• 2003

Future wireless networks are expected to achieve high bit rates at low cost, enabling multimedia and QoS-based services over the wireless medium. The impulse radio ultra-wide band (IR-UWB) technique is a promising candidate in the deployment of such networks, thanks to its potential robustness and capacity. In the past, most of the UWB research focused on hardware and physical layer aspects in order to solve the technological challenges posed by IR-UWB. UWB peculiar characteristics may, however, also stimulate innovative higher layers’ design. This work addresses MAC issues for UWB communication systems. Key areas such as medium sharing, MAC organization, packet scheduling and power control are reviewed. The impact of UWB on the above functions is discussed, and areas which require UWB specific design are identified. Finally, novel MAC functions enabled by UWB specific features, i.e., precise ranging and positioning, are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.316-324
• /
• 2007

In this paper we proposed an energy consumption model for IR-UWB wireless sensor networks. The model takes the advantages of PHY-MAC cross layer design, and we used slotted and un-slotted sleeping protocols to compare the energy consumption. We addressed different system design issues that are responsible to energy consumption and proposed an optimum model for the system design. We expect the slotted sleeping will consume less energy for bursty load than that of the un-slotted one. But if we consider latency, the un-slotted sleeping model performs better than the slotted sleeping case.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.299-307
• /
• 2015

Reduction in pollution performance of polymeric insulators, aged due to water absorption stress and thermal stress, is a major threat to the reliable operation of power transmission and distribution system. Formation of partial discharges on the surface of wet polluted insulator plays a major role in determining the life time and pollution performance of outdoor polymeric insulators. However, reports on partial discharge characteristics of water absorption stress aged and thermal aged polymeric insulators are scanty. This paper discusses the pollution performance characteristics of accelerated aged polymeric insulators using the advanced ultra wide band PD signal measurement and analysis. Laboratory experiments on accelerated aged polymeric insulators were carried out as per IEC 60507 under AC voltage, at different humidity and contamination levels using NaCl as a contaminant. PRPD pattern and Time-Frequency map analysis of PD signals were carried out. From the results, it can be speculated that PD analysis is a well suited technique to understand the pollution performance of aged polymeric insulators.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.193-196
• /
• 2004

This paper have a whole azimuth Omni-directional radiation pattern and will become the good radiation efficiency for applies in the steeve antenna and form which is the appearance. We contain by whole course of actual implement model to antenna design. And we will confirm the efficiency the analysis of the antenna to design and through a simulated experiment according to the implementation Ideal characteristic of the antenna to be used between 3.1 and 10.6 GHz of UWB.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.289-292
• /
• 2004

In this paper, we propose parallel Viterbi decoders applied to UWB(Ultra Wide Band). In consideration of power dissipation and ease of design, we design the architecture, using 132MHz clock instead of 528MHz clock in Baseband. Because Deinterleaver writes and reads the transmitted data per 6Ncbps(The number of coded bits per symbol). using the difference between the number of sampling clock per symbol and the number of coded bits per symbol, we reduce performance degradation of parallel Viterbi decoders. In comparison with using 528MHz clock, the result is little difference.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.309-312
• /
• 2004

This paper proposes the architecture of UWB OFDM communication system. More high data rate is requested in the 128-point FFT/IFFT of the UWB OFDM communication system than the conventional communication systems. So, the proposed architecture uses pipeline and parallel architecture. For a highly efficient architecture, the optimal clipping power and the input quantization bits are found in simulation. The hardware complexity of the proposed architecture is presented is consideration of Adder, Register and Complex Multiplier.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.285-288
• /
• 2005

In this paper, we propose a two step Binary Exponential search algorithm for rapid acquisition time of UWB(Ultra Wide Band) signal on UWB communication systems. Previous proposed timing acquisition algorithm is searching whole frame that consist of the number of n Bins to terminate search, however this paper proposed two step Binary Exponential search algorithm can achieve remarkable reduction of UWB signal acquisition time as limiting search group. Proposed search algorithm is consisting of search group establishment step and Bit Reversing of search group establishment step.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.3
• /
• pp.173-182
• /
• 2015

A real-time, Indoor navigation systems utilize ultra-wide band (UWB), radio-frequency identification (RFID) and received signal strength (RSS) techniques that encompass WiFi, FM, mobile communications, and other similar technologies. These systems typically require surplus infrastructure for their implementation, which results in significantly increased costs and complexity. Therefore, as a solution to reduce the level of cost and complexity, an inertial measurement unit (IMU) and quick response (QR) codes are utilized in this paper to facilitate navigation with the assistance of a smartphone. The QR code helps to compensate for errors caused by the pedestrian dead reckoning (PDR) algorithm, thereby providing more accurate localization. The proposed algorithm having IMU in conjunction with QR code shows an accuracy of 0.64 m which is higher than existing indoor navigation techniques.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.28-41
• /
• 2003

A micros-strip ring patch antenna with ultra wide band characteristics is presented. The proposed antenna is designed by a modified form of the annular ring patch antenna with modified microstrip feedline. The designed antenna gives 5.6GHz bandwidth with regular radiation pattern from 4.4GHz to 12.0GHz for -10dE return loss or VSWR of less than 2.0 in simulation, which is also excellently agreed with the measured data.