• Title/Summary/Keyword: Ultimate Aerobic Biodegradability

Search Result 5, Processing Time 0.023 seconds

Biodegradibility Tests of Biodiesel-derived Pentaerythritol Lubricant Oil Bases (바이오디젤 유래 펜타에리쓰리톨계 윤활유 베이스의 생분해성 테스트)

  • 정해영;김의용;채희정
    • KSBB Journal
    • /
    • v.19 no.2
    • /
    • pp.132-137
    • /
    • 2004
  • Biodegradability test for various synthetic lubricant oil bases derived from biodiesel was carried out. The biodegradability was estimated under aerobic aqueous condition, according to the method by OECD 301 B, which is based on CO$_2$ evolution test. The ultimate biodegradability of pentaerythritol methyl esters were estimated as 61.1∼80.3%, at 28 day with which the test compounds were indicated as ultimately biodegradable. Among the tested samples, biodiesel showed the highest biodegradability (83.5%). The validation with several criteria, regarding relative errors of test results, toxicity control and procedure control, was performed through the biodegradability test. The test procedure was validated for all the tested lubricant oil bases and biodiesel, except for petroleum diesel.

Anaerobic/Aerobic Biological Reaction Characteristics of the Marine Products Industry Wastewater (수산물가공폐수의 혐기.호기 생물학적 반응특성)

  • Choi, Yong-Bum;Kim, Gau-You;Kwon, Jae-Hyouk
    • Journal of Environmental Health Sciences
    • /
    • v.34 no.6
    • /
    • pp.452-458
    • /
    • 2008
  • This study was undertaken to establish the biological reaction characteristics of the marine products industry wastewater which contains high concentrations of organic matter and saline. As the S/I is varied from 0.3 to 1.2, the results were follows : the observed ultimate anaerobic biodegradability varied from 72.0 to 88.0%, the first order reaction rate varied from 0.1735 to $0.3420\;day^{-1}$ and the second order reaction rate varied from 0.0132 to $0.0295\;day^{-1}$. When S/I was 0.9, the first order reaction rate had a maximum value, but the variations of the second order reaction rate were less than 1st-order reaction rate. When the operation time exceeded 2 days the gas production rapidly increased. The source of this rapid increase was due to that the activity of the granular sludge used in this study being faster than that of conventional sludge. Under aerobic condition, the characteristics of organic matter were as follows: the marine industry wastewater used in this study contained about 81% of biodegradable matter, and it was divided into readily biodegradable COD(Ss), slowly biodegradable COD(Xs), soluble COD(Si) and inert suspended COD (Xi). The percentages of each COD were 87.3%, 23.9%, 6.4% and 12.4% respectively.

Effect of Salt Concentration on the Aerobic Biodegradability of Sea Food Wastewater (수산물 가공폐수의 호기성 생분해도에 미치는 염분농도의 영향)

  • Choi, Yong-Bum;Kwon, Jae-Hyouk;Rim, Jay-Myung
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.32 no.3
    • /
    • pp.256-263
    • /
    • 2010
  • The study was performed to evaluate the effects of chloride concentrations on the ultimate aerobic biodegradability and to use the result as the fundamental data for sea food wastewater treatment. When the organic removal efficiency by chloride concentrations (1,400~18,000 mg/L) was evaluated, microbes adapted to the saline at ${\leq}$ 6,000 mg/L of chloride but treatment efficiency was not improved at ${\geq}$ 12,000 mg/L of chloride because of delayed reaction time. Functional coefficient $Y_I$ of non-biodegradable soluble organic and inert material production coefficient Yp by microbe metabolism increased as chloride concentrations increased. Soluble organic matter ratio by chloride concentration (0~18,000 mg/L) was 10.8~13.1%, inert material production efficiency by microbes metabolism was evaluated as 7.0~24.6%. $NH_3$-N removal efficiencies were 96.2, 96.5, 90.2 and 90.3% using original wastewater HRT 18 hr, 6,000 mg/L chloride concentration HRT 22 hr, 12,000 mg/L chloride concentration HRT 30 hr, and 18,000 mg/L chloride concentration HRT 45 hr, respectively. Nitrification process was more sensitive to salt concentration than organic matter removal to salt concentration. Under ${\geq}$ 6,000 mg/L chloride concentration, conversion rate from $NO_s$-N to $NO_2$-N was low.

Effects of Advanced Oxidation of Penicillin on Biotoxicity, Biodegradability and Subsequent Biological Treatment (고도산화공정 처리가 페니실린의 생독성, 생분해도 및 생물학적 분해에 미치는 영향)

  • Luu, Huyen Trang;Minh, Dang Nhat;Lee, Kisay
    • Applied Chemistry for Engineering
    • /
    • v.29 no.6
    • /
    • pp.690-695
    • /
    • 2018
  • Advanced oxidation processes (AOPs) composed of O3 and UV were applied to degrade penicillin (PEN). The degradation efficiency was evaluated in terms of changes in the absorbance (ABS) and total organic carbon (TOC). The combination of $O_3/H_2O_2/UV$ and $O_3/UV$ showed the best performance for the reduction of ABS (100% for 9 min) and TOC (70% for 60 min) values, although the mineralization was uncompleted under the experimental condition in this study. The change in biotoxicy was monitored with Escherichia coli susceptibility and Vibrio fischeri biofluorescence. The E. coli susceptibility was eliminated completely for 9 min by $O_3/UV$, and the toxicity to V. fischeri biofluorescence was 57% reduced by $O_3/H_2O_2/UV$. For the ultimate treatment of PEN, it is suggested that an AOP using $O_3/UV$ is followed by biological treatment, utilizing the enhanced biodegradability by the AOP. During 30 min of $O_3/UV$ treatment, the $BOD_5/COD$ ratio as an indication of biodegradability showed about 4-fold increment, compared to that of using a non-treated sample. TOC removal rate for AOP-pretreated PEN wastewater increased 55% compared to that of using the non-pretreated one through an aerobic biological treatment by Pseudomonas putida for artificial wastewater containing 20 mg/L of PEN. In conclusion, $O_3/UV$ process is recommended as a pretreatment step prior to an aerobic biological process to improve the ultimate degradation of penicillin.