• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.121-128
• /
• 2007

The objective of this study was to determine the efficacy of different water temperatures and time of spray-washing on the removal of bacteria contamination from surface of pork carcass and to obtain better meat quality with high temperature stream between 60 to 90℃ for the time ranged from 10 to 60 sec. Results showed that total plate counts were significantly decreased with increasing steam temperature(P<0.05). Similar results were found with the spray time(P<0.05). The lightness(CIE L*) value was significantly increased in both loin and ham cuts over 80℃(P<0.05). Ultimate pH of muscle and water-holding capacity were decreased with increasing steam temperature(P<0.05). There was a significant difference in solubility of sarcoplasmic protein between 70℃ and 80℃ of the steam treatments with higher value at 70℃(P<0.05). Again, longer than 30 sec spray at 70℃ steam, the lightness value of pork was significantly increased(P<0.05), while pH and water-holding capacity of muscle were significantly decreased(P<0.05). Therefore, a desirable pork quality would be achieved with spray-steam washing at 70℃ for 20 sec on pork carcass.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.332-340
• /
• 2016

Sunken ships cause damage to the environment due to the dispersal of fuel oil and harmful cargo goods in the hull. Since the sunken ship is mostly flooded by the seabed, it tends to be in a relatively stable condition. However, the heavy body, together with the load of remaining goods in the cargo hold, the constant contact with the seabed, and ocean currents and tidal waves, can affect dispersal of residual fuel oils out of the sunken ship. Corrosion of the sunken ship starts upon sinking, decreasing the thickness of the hull structure and sub-materials. Therefore, it is necessary to assess the structural stability against the potential breakdown of the sunken ship. Whilst evaluating the danger of the sunken ship, this result should be reflected in 'the possible discharge'. This study was undertaken to suggest a procedure for a step by step evaluation to assess the structural stability a sunken ship. The structural stability assessment to estimate the collapsibility of the hull was structure targeted at the sunken ship 'No. 7 HaeSung', which was classified as the prime example for the intensive management of sunken ships. This study was undertaken to suggest a procedure for a step by step evaluation to assess the structural stability a sunken ship and to propose a method to conduct a structural safety assessment that estimates the collapsibility of the hull by targeting the sunken ship 'No. 7 HaeSung',which was classified as the prime example for the intensive management of sunken ships. The collapsibility of the hull structure was estimated Based on the damage size of the hull structure, and the corrosion rate of the hull structure and sub-materials due to the seawater after sinking. It was confirmed that there was a low possibility of the total destruction of the hull structure at the current time. However, there is a high possibility in the potential failure of the hull structure due to increased rate of corrosion thereafter. Therefore, we believe continuous study on influence of corrosion and marine environment change to sunken ship's structural safety is necessary.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.1
• /
• pp.103-113
• /
• 1993

Every year, over $3.37{\times}10^7$ ton of municipal solid waste is generated in Korea, of which about 28% is organic food waste from restaurant, dining halls and households etc. Methane conversion of the food waste by anaerobic digestion could be a viable approach for energy recovery as well as safe disposal of the waste. However, as food waste is composed of highmolecular complex polymers such as cellulose, lignin and protein, anaerobic digestion of food waste has not been efficient in terms of volumetric loading rate, solid retention time and extent of anaerobic degradation. In this research, the improved anaerobic degradation of food waste was attemped by applying rumen microorganisms to anaerobic digestion. Acidification efficiency of food waste by rumen microorganisms was compared with that of conventional acidogenesis. And optimum acidification conditions by rumen microorganisms were also determined. For the experiments, anaerobic batch reactors of 600 mL was fed with the processed (dried and milled) food waste obtained from a restaurant. Ultimate volatile fatty acid (VFA) yield produced by rumen microorganisms was about 8.4 meq VFA/g volatile solid (VS) that is 95% of the theoretical value. This yield was not much different from that of conventional acidogenesis, but hydrolysis rate was about twice faster. Cumulative VFA concentration increased from 66 meq/L to 480 meq/L, when the initial TS was increased from 1% to 15%. But VFA yield at 15% TS was half of that at 1% TS. This inhibition on the acidification might be caused by the rapid drop of pH and higher concentration of nonionized VFA. Optimal pH and temperature range for the acidification were about 6.0~7.5 and $35{\sim}45^{\circ}C$, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.23-30
• /
• 2007

The ultimate objective of this study is to develop oxygen-enriched combustion techniques applicable to the system of practical industrial boiler. To this end the combustion characteristics of lab-scale LNG combustor were investigated as a first step using the method of numerical simulation by analyzing the flame characteristics and pollutant emission behaviour as a function of oxygen enrichment level. Several useful conclusions could be drawn based on this study. First of all, the increase of oxygen enrichment level instead of air caused long and thin flame called laminar flame feature. This was in good agreement with experimental results appeared in open literature and explained by the effect of the decrease of turbulent mixing due to the decrease of absolute amount of oxidizer flow rate by the absence of the nitrogen species. Further, as expected, oxygen enrichment increased the flame temperatures to a significant level together with concentrations of $CO_2$ and $H_2O$ species because of the elimination of the heat sink and dilution effects by the presence of $N_2$ inert gas. However, the increased flame temperature with $O_2$ enriched air showed the high possibility of the generation of thermal $NO_x$ if nitrogen species were present. In order to remedy the problem caused by the oxygen-enriched combustion, the appropriate amount of recirculation $CO_2$ gas was desirable to enhance the turbulent mixing and thereby flame stability and further optimum determination of operational conditions were necessary. For example, the adjustment of burner with swirl angle of $30\sim45^{\circ}$ increased the combustion efficiency of LNG fuel and simultaneously dropped the $NO_x$ formation.

• The Korean Journal of Pharmacology
• /
• v.7 no.1
• /
• pp.53-65
• /
• 1971

It is well known that diabetes mellitus is associated with metabolic derangements, such as hyper-glycemia, ketosis, glycosuria, and also widespread alterations in the blood vessels, kidneys, eyes, peripheral nerves and heart. It is also recognized that healing of skin wound is delayed in diabetics. In bone, according to Aegerter, osteopenia develops in diabetes mellitus and it is chiefly ascribed to overutilization of protein. Shim claims that total blood flow to the entire skeletal system is approximately 4 to 8 percent of resting cardiac output and blood supply to the skeletal system would be decreased on account of secondary arteriosclerotic changes in the diabetics. An adequate blood supply is an essential factor in the healing process of fracture, and disturbed blood flow, either local or systemic, will invariably delay union of the fragments or the fragments from being fused. As the author has encountered several cases of diabetics in whom healing of fracture was delayed or incomplete, this experimental study was undertaken to elucidate the effects of hyperglycemia and diabetes mellitus on the healing process of fracture. In this experiment adult albino rabbits, weighing about 2 kg. were used and divided into 6 groups. The femur of each animal was fractured surgically, and then the healing process of fracture was periodically checked by radiography at an interval of one week for a period of 6 weeks. Thereafter, all the rabbits were killed to obtain tissue preparation of the femur. The experimental groups were as follows; 1) Control group: Six rabbits sustained a surgical fracture to the femur, without being given any other treatment or drug. 2) Alloxan-treated group: For inducing diabetes, alloxan was given intravenously to 17 rabbits in various dose as follows; to 7 of them 40 mg/kg, to 6 rabbits 80 mg/kg and to 4 rabbits 120 mg/kg of body weight, respectively. 3) Insulin-treated group: Protamine-zinc insulin was injected subcutaneously to each of 6 rabbits in a daily dose of 1 unit per kilogram of body weight. 4) Group treated with insulin after alloxan: Four rabbits were given 80 mg of alloxan once and than 1 unit of insulin per kilogram of body weight daily. Another 5 rabbits were injected 1 unit of insulin per kg of body weight daily following administration of alloxan in a dose of 120 mg/kg. 5) Homotransplantation group: Following intravenous injection of alloxan in a dose of 120 mg/kg, 10 rabbits underwent homotransplantation of a short bone segment to the femur. Five of them were subsequently given 1 unit/kg of insulin daily. 6) Sugar-treated group: six rabbits were fed $15{\sim}20$ gm of sugar daily throughout the period of experiment. The results obtained are summarized as follows; 1. Blood sugar level and damage to the pancreatic islet increased proportionately when alloxan was given to the rabbits in various doses. No appreciable change could be observed in the islets when the blood sugar level was altered by either oral administration of sugar or subcutaneous injection of insulin. 2. Comparing with the control group, healing of fracture was delayed in the alloxan-treated group, while callus formation and periosteal reaction were shown to be more prominent in this group and subsequently, the ultimate osseous tissue formed at the fracture site was significantly smaller in amount and less compact. These findings were more marked as the amount of alloxan increased. 3. Administration of insulin prevented the delay in healing process of fracture in the rabbits with alloxan-induced hyperglycemia. In this case, the course and progression of fracture healing were almost similar to those of control group. 4. Union between the host bone and the fragment transplanted from other rabbit of the same species was more delayed in the group treated with alloxan alone than in the group to which insulin was administered after development of alloxan-induced diabetes. In both groups periosteal new bone developed from the ends of the host bone, above and below the transplanted fragment, and directly fused with failure of periosteal callus to bridge the adjacent ends of the host bone and the transplanted fragment. 5. The healing process of fracture was not inhibited by alteration in blood sugar level when the blood sugar was abnormally increased by excessive sugar intake or lowered by administration of insulin alone. The healing of fracture in these groups progressed similarly as in the control group. In brief summary, it appears that the healing process of fracture would be definitely disturbed in diabetic state brought about by damage to the pancreatic islet. As such an inhibition could be overcome with insulin, it seems that insulin plays an important role in healing of fracture, but alteration in blood sugar level alone does not modify healing process of fracture to significant degree.

• Journal of Applied Biological Chemistry
• /
• v.57 no.1
• /
• pp.65-72
• /
• 2014

Biochar (BC) from biomass pyrolysis is a carbonaceous material that has been used to remove various contaminants in the environment. The eliminatory action for burcucumber (Sicyos angulatus L.) as an invasive plant is being consistently carried out because of its harmfulness and ecosystem disturbance. In this study, burcucumber biomass was converted into BCs at different pyrolysis temperatures of 300 and $700^{\circ}C$ under a limited oxygen condition. Produced BCs were characterized and investigated to ensure its efficiency on antibiotics' removal in water. The adsorption experiment was performed using two different types of antibiotics, tetracycline (TC) and sulfamethazine (SMZ). For the BC pyrolyzed at a high temperature ($700^{\circ}C$), the values of pH, electrical conductivity, and the contents of ash and carbon increased whereas the yield, mobile matter, molar ratios of H/C and O/C, and functional groups decreased. Results showed that the efficiency of BCs on antibiotics' removal increased as pyrolysis temperature increased from 300 to $700^{\circ}C$ (38 to 99% for TC and 6 to 35% for SMZ). The reaction of ${\pi}-{\pi}$ EDA (electron-donor-acceptor) might be involved in antibiotics' adsorption to BCs. BC has potential to be a superior antibiotics' adsorbent with environmental benefit by recycling of waste/invasive biomass.

• Cartoon and Animation Studies
• /
• s.50
• /
• pp.75-99
• /
• 2018

Makoto Shinkai, an animated film maker in Japan, has been featured as a one-person production system and as a 'writer of light', but his 2016 release of "Your Name" was a departure from the elements that characterize his existing works. At the same time, by the combination of the traditional musubi(むすび) story, ending these, it was a big hit due to its rich narratives and attraction of open interpretation possibility. As it can be guessed from the title of this work, this work shows the encounter between the Japanese ancient language and the modern language in relation to the 'name', and presents the image that the role of the name(language) is repeatedly emphasized with various variations in events for the perfect 'encounter'. In this work, the interpretations of $Signifi\acute{e}$ for characters and objects are extended and reserved as a metaphorical role of the similarity, depending on the meaning of the subject which they touch. The relationship between words and objects analyzed through the structure of Signifiant and $Signifi\acute{e}$ is an epoch-making ideological discovery of modern times revealed through F. Saussure. Focusing on "the difference" between being this and that from the notion of Saussure, Derrida dismissed logocentrism, rationalism that fully obeyed the order of Logos. Likewise, dismissing the center, or dismissing the owner had emerged after the exclusive and closed principle of metaphysics in the west was dismissed. Derrida's definition of 'deconstruction' is a philosophical strategy that starts with the insight on the nature of language. 'Dissemination,' a metaphor that he used as a methodological concept to read texts acts as interpretation and practice (or play), but does not pursue an ultimate interpretation. His 'undecidability' does not start with infinity, but ends with infinity. The researcher testifies himself and identifies that we can't be an interpreter of the world because we, as a human are not the subject of language but a user. Derrida also interpreted the world of things composed of Signifiant and $Signifi\acute{e}$ as open texts. In this respect, this study aimed to read Makoto's works telling about the meeting of a thing and a thing with name as a guide, based on Derrida's frame of 'deconstruction' and 'dissemination.' This study intends to re-consider which relationship the Signifiant and $Signifi\acute{e}$ have with human beings who live in modern times, examine the relationship between words and objects presented in this work through Jacques Derrida's destruction and dissemination concepts, and recognize that we are merely a part of Signifiant and $Signifi\acute{e}$. Just as Taki and Mitsuha confirm the existence by asking each other, we are in the world of things, expecting musubi that a world of names calls me.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1013-1019
• /
• 2007

Electronic wastes have increased tremendously. However, any reliable treatment methodologies have rarely been established. Electronic wastes have posed serious disposal problem due to their physico-chemical stability. This paper investigated the application possibility of pyrolysis for the purpose of recycling the p-CCL(phenol based Copper Clad Laminate). Thermogravimetric analysis(TGA) was used to investigate the thermal decomposition pattern of p-CCL. We elucidated the characteristics of pyrolysis by-products at operating temperatures of 280, 350 and $600^{\circ}C$. GC/MS and FT-IR were used to characterize the liquid by-products along with general characterization methods such as Ultimate Analysis, Proximate Analysis and Heating Value, whereas general characterization methods were only introduced for the solid by-products. At a heating rate of $5^{\circ}C$/min, TGA curves exhibited three decomposition stages: (1) low-temperature decomposition region$(<280^{\circ}C)$, (2) medium temperature region$(280\sim350^{\circ}C)$ and (3) high-temperature region$(>350^{\circ}C)$. The major compounds of liquid by-products at low- and medium-temperatures were accounted for by water and phenol, whereas branched phenols and furans were major compounds at high-temperatures. As the temperature increases, volatile quantities decreased but the fixed carbon increased. High heating values of solid by-products($7,400\sim7,600$ kcal/kg) would suggest that the solid by-products could be applicable as fuel. In addition, high fixed carbon but low ash content of the solid by-products offered an implication that they are capable of being upgradable for adsorbent after applying appropriate activating process.

• Korea journal of population studies
• /
• v.27 no.1
• /
• pp.171-201
• /
• 2004

Modern sciences in the West are deeply rooted in the Greek and Roman cultural heritage. Consequently, the academic achievements accomplished by the scholars of the Arabs including Persian world, the profound thoughts developed in the Indian subcontinent, and the excellent works made by the East Asian scholars have mostly been neglected in the past. This paper attempts to compare the thoughts and theories on population developed by the Western scholars with those of East Asian scolars, in chronological order, ancient, mediaeval, and modern period before Malthus. The thesis that excessive population growth may reduce output per worker, depress levels of living for the masses and engender strife is of great antiquity. In fact, overpopulation in East Asia, especially in China, goes back to very ancient times, most Confucian scholars maintained the notion of a numerical balance between population and environment. They also looked for means to check the increase in numbers. The foundations of a theory of optimum population level, fully developed in the twentieth century, can be found in their writings. Although early population thoughts in China had not advanced far in the analysis of the significance of population size and growth, it had taken only a few steps forward. At some times and to some observers, populousness appeared desirable; at other times and to other observers, it seemed all too evident that the number of people could become too great. These viewpoints foreshowed some of the later developments. The early population literatures reviewed here seem to consist of a number of quite isolated contributions. In fact, however, there may have been a greater continuity of thought than now appears, for many of the contributions may have been lost and there are many gaps in the record. An intensive review on comparing two works, those of Malthus' and Hong, Liang-chi's, are presented in this paper. Only five years before Malthus published his famous work, An Essay on the Principle of Population, Hong published his theories on population. Some of them, Hong insisted, are very similar to the Malthusian concepts of geometrical increase, natural and artificial checks of population. Despite the excellent works in the ancient period, this paper concludes with an investigation of the reasons why modem achievements in scientific areas in the East Asia have been far behind that of the West.

• Korean Journal of Cleft Lip And Palate
• /
• v.3 no.1
• /
• pp.23-31
• /
• 2000

Objective: When an alveolar cleft is too large to close with adjacent mucobuccal flaps or large secondary fistula following a primary bilateral palatoplasty exists, a one-stage procedure for bone grafting becomes challenging. In such a case, we used the tongue flap to repair the fistula and cleft alveolus in the first stage, and bone grafting to the cleft defect was performed in the second stage several months later. The purpose of this paper is to report our experiences with the use of an anteriorly-based Y-shaped tongue flap to fit the palatal and labial alveolar defects and the ultimate result of the bone graft. Patients: A series of 14 patients underwent surgery of this type from January 1994 to December 1998.The average age of the patients was 15.8 years old (range: 5 to 28 years old). The mean period of follow-up following the 2nd stage bone raft operation was 45.9 months (range: 9 to 68 months). In nine of the 14 cases, the long-fork type of a Yshaped tongue flap was used for extended coverage of the labial side alveolar defects with the palatal fistula in the remaining cases the short-forked design was used. Results: All cases demonstrated a good clinical result after the initial repair of cleft alveolus and palatal fistula. There was no fistula recurrence, although Partial necrosis of distal margin in long-forked tongue flap was occurred in one case. Furthermore, the bone graft, which was performed an average of 8 months after the tongue flap repair, was always successful. Occasionally, the transferred tongue tissue was bulging and interfering with the hygienic care of nearby teeth; however, these problems were able to be solved with proper contour-pasty performed afterwards. No donor site complications such as sensory disturbance, change in taste, limitations in tongue movement, normal speech impairments or tongue disfigurement were encountered. Conclusion: This two-stage reconstruction of a bilateral cleft alveolus using a Y-shaped tongue flap and iliac bone graft was very successful. It may be indicated for a bilateral cleft alveolus patient where the direct closure of the cleft defect with adjacent tissue or the buccal flap is not easy due to scarred fibrotic mucosa and/or accompanied residual palatal fistula.