• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.8
• /
• pp.1159-1163
• /
• 2012

In this paper, a new method is suggested to reduce the size of a wide-band array antenna. The power-divider for the feeding structure is made compact as ${\lambda}/8$ with the help of a novel Metamaterial UWB bandpass filter. This power divider is clearly different from others in that the proposed design uses microstrip structured Composite Right and Left-Handed (CRLH) filters, while others use two dielectric layers or long tapered transmission lines. In order to validate the proposed design method, the circuit and full-wave simulated results of the power divider with the Metamaterial UWB filters are compared to each other, and the Metamaterial properties of the structure are shown with the electric field at the ZOR and dispersion diagram. Furthermore, the antenna performance of the fabricated antenna with the power divider is measured and compared with the prediction. Also, the size reduction effect by the proposed scheme is addressed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.162-167
• /
• 2009

In this paper, we present a compact Ultra-Wideband band-pass filter using a high-pass filter and low-pass filter. The structure of our proposed band-pass filter is very simple and the DGS(Defected Ground Structure) structure is used to get the low-pass filter characteristic. Our proposed band-pass filter can be much smaller than a cascaded filter. As a result of measurement the insertion loss is less than 0.5dB throughout the pass-band of $2.1GHz{\sim}10.56GHz$, the return loss is more than 20dB and the group delay maximum variation is 0.23ns from 0.12ns to 0.35ns.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.117-122
• /
• 2006

A CMOS LNA based on a single-stage cascode configuration is designed for MB-OFDM ultra-wide band(UWB) systems. Wideband($3.1GHz\~4.9GHz$) input matching is performed using a simple bandpass filter to minimize the chip size and the noise figure degradation. The simulation results using $0.18{\mu}m$ CMOS process parameters show a power gain of 9.7dB, a 3dB band width of $2.1GHz\~7.1GHz$, a minimum NF of 2dB, an IIP3 of -2dBm. better than -11.8dB of input matching while occupying only $0.74mm^2$ of chip area. It consumes 25.8mW from a 1.8V supply.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.583-590
• /
• 2010

In this paper, a novel CRLH-TL unit cell with controllable transmission zeros was proposed. Proposed composite right/left handed transmission line(CRLH-TL) unit cell is implemented in the form of the metal-insulator-metal(MIM) capacitors, the microstrip stub inductors, and the co-planar waveguide(CPW) inductor. And this proposed CRLH-TL generates two transmission zeros in lower/upper passband by the effort of electromagnetic couplings between each MIM capacitors and microstrip stub inductors. Using this proposed CRLH-TL, broad bandpass filter for UWB system was designed and fabricated. The measured results reveal that the two transmission zeros are observed in lower/upper passband and the overall size of the filter, excluding the feed line is about 8 mm$\times$8 mm, less then $\lambda_g$/4 on electric size.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.380-388
• /
• 2005

This paper presents analysis results of the effects of RF filter characteristics on the system performance of impulse radio. The impulse radio system transmits modulated pulses having very short time duration and information can be extracted in receiver side based on cross-correlation between received and transmitted pulses. Accordingly, the pulse distortion due to in-band group delay variation can cause serious system performance degradation. In general, RF bandpass filters inevitably cause group delay difference to the signal passing through the filter which is proportional to its skirt characteristic due to its resonance phenomenon. For time as well as frequency domain analysis, small signal scattering parameter $S_{21}$ and its Fourier transform are used to characterize output pulse waveform under the condition that the input and output ports are matched. The output pulse waveform of the filter is predicted based on convolution integral between input pulse and filter transfer function, and resulting BER performances in the BPM and PPM based impulse radio system are calculated.