• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.28-32
• /
• 2017

The degradation of methyl blue (MB) catalyzed by platinum (Pt)-graphene/$TiO_2$ in dark ambiance was studied. Pt-graphene/$TiO_2$ composites were prepared by simple hydrothermal method. Characterizations of composites were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), specific surface area (BET) analysis, and energy dispersive X-ray (EDX) analysis. UV-spectroscopic analysis of the dyes was performed by measuring the change in absorbance. The degradation of the organic dyes was calculated based on the decrease in concentration of the dyes with respect to regular time intervals. Rate coefficients for the catalytic process were successfully established and reusability tests were performed to test the stability of the used catalysts.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.213-214
• /
• 2000

New light-emitting polyimides were synthesized from the conventional polycondensation of 5,5'-bis(4-aminophenyl)-2,2'bifuryl (PFDA) with fluorinated and non-fluorinated aromatic dianhydrides, providing a good quality of thin films: 6F-PFDA PI and ODPA-PFDA PI. Their UV-visible absorbance and photoluminescent characteristics were investigated. The polymers emit blue and blue-greenish light in a quantum yield of 7.3-14.9%, depending on the polymer backbone.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.317-321
• /
• 2012

Poly[4,4'(3,3')-biphenylenevinylene-alt-2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene-vinylene], 4,4'(3,3')-PBPMEH-PPV, and poly[4,4'(3,3')-biphenylenevinylene-alt-N-ethylhexyl-3,6-carbazolevinylene], 4,4'(3,3')-PBPCAR-PPV, of varying effective conjugation lengths, were synthesized by the well-known Wittig condensation polymerization between the appropriate biphenyl diphosphonium salts and dialdehyde monomers such as carbazole or dialkoxyphenyl dialdehyde. The conjugation lengths of the polymers were controlled by biphenyl linkages (4,4' or 3,3'). The resulting polymers were highly soluble in common organic solvents and exhibited good thermal stability up to $300^{\circ}C$. The synthesized polymers showed UV-visible absorbance and photoluminescence (PL) in the ranges of 314-400 nm and 430-507 nm, respectively. Carbazole and 3,3'-biphenyl containing 3,3'-PBPCAR-PPV showed a blue PL peak at 430 nm. A single-layer light-emitting diode was fabricated in a configuration of ITO/polymer/Al. Electroluminescence (EL) emission of 3,3'-PBPCAR-PPV was shown at 455 nm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1333-1335
• /
• 1997

We have made disperse diazo black D(DBD) thin films using Langmuir-Blodgett(LB) and vacuum-evaporation technique. Physical and optical properties of the films were investigated. Solution was made with a concentration of $10^{-3}mol/{\ell}$ using chloroform. Moving wall apparatus, (NL-LB140S-MWC) was employed to make the LB films. X,Y and Z-type LB films were manufactured and studied UV/visible absorbance spectra and morphology of surface using atomic force microscopy(AFM). Vacuum-evaporated DB D thin films were made at a pressure of $10^{-5}$ torr. The absorption peaks were observed at 200 and 400 nm in the LB films and vacuum-deposited films. We have also studied photoluminescence spectrum of the DBD films.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1418-1421
• /
• 2009

A series of new light-emitting random copolymers with fully conjugated structure was prepared, for the first time through the well-known Gilch polymerization between 1,4-bis(chloromethyl)-2-ethylhexyloxy-5-methoxybenzene and 2,5-bis(bromomethyl)thiophene monomers in different ratios. The synthesized polymers (on thin film) showed the maximum wavelength of UV-visible absorbance and photoluminescence (PL) near 500 nm and near 600 nm, respectively. A single-layer light-emitting diode device, which has a simple ITO (indium-tin oxide)/polymer/Al configuration, was fabricated by spin-coating of polymers and then vacuum evaporation of Al metal. The threshold bias of PMEHPVTVs was in the range of 3.5-10 V. As in the PL spectra, the maximum wavelength of light emission near 600 nm was also shown in electroluminescence (EL) spectra of PMEHPVTVs when the operating voltage was about 7 - 14 V.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1900-1906
• /
• 2012

Three carbazole chromophores featuring dicyano, cyano, ethyl acetate and dimethyl acetate groups as an acceptor moiety with a ${\pi}$-conjugated spacer and $N$-methyl dibenzo[$b$]pyrole as donor were synthesized by Knovenagel condensation and characterized by IR, $^1HNMR$, $^{13}CNMR$, UV-vis, fluorescence spectroscopy, electrochemistry and theoretical B3LYP/6-$311G^*$ level whilst NLO properties and spectroscopic quantities were calculated. Calculations showed remarkable trend with HOMO located on the donor moiety and LUMO on the acceptors dicyano methylene, cyano, ethyl acetate methylene and dimethyl acetate methylene. In agreement with the calculations, solvatochromic, behavior intramolecular charge transfer band was observed in the visible region.

• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.205-210
• /
• 2017

In this study, we examined the photo-degradation efficiency of $CoSe_2$-Graphene-$TiO_2$ ($CoSe_2-G-TiO_2$) nanocomposites under visible light irradiation using rhodamine B (RhB) as standard dye. $CoSe_2-G-TiO_2$ nanocomposites were synthesized by ultrasonication and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopic analysis and UV-Vis absorbance spectra analysis. Our results show that the $CoSe_2-G-TiO_2$ nanocomposite exhibited significant photo degradation efficiency compared to pure $TiO_2$ and $CoSe_2-G$, approximately 85.2% of the rhodamine (Rh B) degraded after 2.5 h. It is concluded that the $CoSe_2-G-TiO_2$ nanocomposite is a promising candidate for use in dye pollutants.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.493-496
• /
• 1997

We have made disperse diazo black D(DB-D) ultrathin films using Langmur-Blodgett(LB) and vacuum-evaporation technique. Physical and electrical properties of the films were investigated. Solution was made with a concentration of 10$^{-3}$ mol/$\ell$ using chloroform. Moving wall apparatus (NL-LB140 S-MWC) was employed to make the LB films. X,Y and Z-type LB films were manufactured and studied by UV/visible absorbance spectra and morphology of surface using atomic force microscopy. Vacuum-evaporated DB-D think films were made at a pressure of 10$^{-5}$ torrr. The absorption peaks appear at 200 and 40nm in the LB films and vacuum-deposited films. And we have studied photoluminescence spectrum of the DB-D films. Also TGA and DSC properties of the DB-D have been observed and current -voltage characteristics of the DB-D LB films have been measured along the perpendicular direction.

• Bulletin of the Korean Chemical Society
• /
• 제21권7호
• /
• pp.701-704
• /
• 2000

Fluorene and carbazole-containing distyrylarylene model and polymeric fluorophores were prepared by reacting 2,7-dibromo-9-butylfluorene and 3,6-dibromo-9-butylcarbazole with styrene and divinylbenzene using the Heck reaction for the chemiluminesc ence. The UV-vis absorbance, photoluminescence (PL) as well as the chemiluminescence (CL) characteristics of the model and polymeric fluorophores were measured. Sodium salicylate-catalyzed reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide produced a strong chemiluminescent blue light emission with 439-489 nm in the presence of the fluorophore. The wave-length of CL light was similar to that of photoluminescence. The chemiluminescent intensity was decayed according to the exponential equation.The glow of CL maintained more than 12 hr and was visible with naked eye.