• 제목/요약/키워드: UV-spectrum

검색결과 557건 처리시간 0.025초

콩나물중 살균제 carbendazim 잔류분의 정량 및 확인 (Determination and confirmation of the carbendazim residue in soybean sprout)

  • 김영국;박종태;홍석순
    • 농약과학회지
    • /
    • 제2권3호
    • /
    • pp.79-84
    • /
    • 1998
  • 콩나물중 carbendazim 잔류분을 정량하고 확인할 수 있는 새로운 분석법을 확립하고자 tandem HPLC(UV & FL) 및 APcI를 source로 사용한 LC/MS를 이용하였다. 이를 위해 FL(fluorescence) 검출기를 UV(ultraviolet) 검출기와 나란히 연결하여 UV 검출기의 경우 280 nm 파장을 그리고 FL 검출기의 경우는 excitation파장과 emission파장을 각각 280 mn와 310 nm로 설정하였다. 분석결과 carbendazim의 검출한계는 $0.04{\mu}g/kg$이었다. 콩나물에 carbendazim을 0.5, 1.0 및 2.0 ppm 수준으로 첨가하여 회수율을 측정한 결과 그 평균값은 89.1%이었다. APcI source를 사용한 LC/MS 질량스펙트럼 방법은 콩나물중 carbendazim 잔류분을 최종 확인할 수 있었다. APcI LC/MS 방법은 전자충격에 의한 질량스펙트럼에 비해 훨씬 간단한 fragment를 형성할 뿐 만 아니라 carbendazim의 경우 m/z 133, m/z 159, m/z 191($M^{+}$)의 전형적인 fragment 이온을 형성하므로, 이 방법을 병행한다면 콩나물중 carbendazim 잔류분을 효과적으로 확인할 수 있을 것으로 사료되었다.

  • PDF

비파괴 자외-가시 및 형광 분광 분석법을 이용한 적색계 전통 염료 분석 (Analysis on Red-colored Dyeing by using Non-destructive UV-visible and Fluorescence Spectrophotometry)

  • 윤은영;김유란
    • 박물관보존과학
    • /
    • 제12권
    • /
    • pp.9-17
    • /
    • 2011
  • 본고는 적색계 염재인 소목, 꼭두서니, 홍화, 자초로 염색한 직물편에 대한 비파괴 자외 가시광 분광분석 및 3차원 형광 분광 분석 내용으로 고대 직물에 염색된 염료 규명을 위한 기초 자료 구축을 위함이다. 직물이나 매염제의 종류에 따라 각 분석 결과에 영향을 주는지 여부를 확인하기 위하여 직물 2 종류(면과 견)와 매염 방법 3 가지(무매염, 백반, 철)로 염색한 직물시편을 제작하였다. 염색 직물편에 대한 자외-가시 분광반사 스펙트럼 결과 소목, 꼭두서니, 자초로 염색한 경우 직물의 종류에 관계없이 매염제에 따른 차이를 보였다. 또한 홍화는 직물 및 매염제에 따른 차이가 없었다. 3차원 형광 스펙트럼 측정결과 소목은 매염제에 따른 차이를 보이며 꼭두서니의 경우 직물에 따른 차이를 보였고, 홍화의 경우 직물과 매염제 관계없이 고유한 형광스펙트럼으로 나타났으며, 자초의 경우 형광스펙트럼이 나타나지 않았다.

유비퀴틴 단백질의 부분적으로 폴딩된 구조에 대한 분광학적 분석 (Spectroscopic Analysis of Partially Folded State of Ubiquitin)

  • 박순호
    • Applied Biological Chemistry
    • /
    • 제46권4호
    • /
    • pp.305-310
    • /
    • 2003
  • Hydrophobic core가 변이된 유비퀴틴 단백질이 pH 2 용액에서 보이는 구조적인 특성을 여러 분광학적 방법으로 측정하였다. 낮은 pH값을 갖는 용액에서 이 변이 유비퀴틴의 intrinsic tryptophan fluorescence emission spectrum은 unfolded 상태보다 약간 blue shift되어 있고 또한 그 intensity도 상당히 낮게 나타났다. 이는 이 용액 조건에서 이 변이 유비퀴틴의 삼차구조가 약간 남아 있는 것을 의미한다. 같은 용액에서 이 변이 유비쥐틴의 far-UV circular dichroic spectrum은 native 상태나 unfolded 상태의 spectrum과 현저히 달랐으며 220 nm 에서의 molar ellipticity 값을 통하여 볼 때 pH 2인 용액에서 상당량의 이차구조를 지니고 있었다. 또한 같은 용액에서 이 변이 유비퀴틴은 hydrophobic dye인 8-anilinonaphthalene-1-sulfonic acid(ANS)외 fluorescence emission intensity를 증가시키고 fluorescence emission maximum이 짧은 파장에서 나타나게 하였다(blue shift). 이러한 현상은 pH 2 용액에서 이 변이 유비퀴틴의 hydrophobic core가 느슨하여져서 hydrophobic dye인 ANS가 결합할 수 있는 구조를 띠고 있음을 나타낸다. 이러한 분광학적인 관찰은 이 변이 유비귀틴이 pH 2인 용액에서 상당량의 이차구조를 지니고 있지만 hydrophobic core는 느슨하게 형성된 molten globule과 같은 형태를 지니고 있음을 나타낸다. 이 변이 유비퀴틴의 molten 히obule 형태는 단백질 폴딩 반응의 경로를 연구할 수 있는 좋은 모델이 될 수 있을 것으로 생각된다.

Pseudomonas cepacia 균주가 생산하는 항진균성 Cyclic Lipopeptide의 생물학적 및 물리 화학적 특성 (Biological and Physico-chemical Properties of Antifungal Cyclic Lipopeptides Produced by Pseudomonas cepacia Strains)

  • 김성호;이민웅
    • 한국균학회지
    • /
    • 제24권4호통권79호
    • /
    • pp.310-321
    • /
    • 1996
  • 토양으로부터 항진균 활성을 나타내는 5종류의 Pseudomonas cepacia 균주 AF027, AF069, AF2001, AF2011, SD02가 분리되었으며 이들은 각각 cyclic lipopeptide계 항진균 물질 CLP027A, CLP069A, Cepacidine A, CLP2011A, CLP02A를 생산하였다. 조사된 P cepacia 균주들은 배지중에 함유된 질소원 및 탄소원의 종류에 따라 항진균 물질 생산성에 현저한 차이가 있었는데, 질소원으로서는 polypeptone-S, 탄소원으로서는 glucose와 fructose가 생산성 증대에 가장 효과적이었다. 항진균물질 $CLP069A_1$$CLP069A_2$는 각각 분자량이 1215와 1199이며, 아미노산 조성, UV spectrum, IR spectrum 및 항진균 스펙트럼에 있어서, Xylocandin $A_1,\;A_2$와 일치하였으며, CLP027 $A_1$$A_2$ 또한 이러한 물리 화학적 특성이 Cepacidine A와 완전히 일치함으로써 동일 물질로 생각된다. $CLP2011A_1,\;A_2$$CLP02A_1,\;A_2$는 아미노산 조성 및 항진균 스펙트럼이 Xylocandin $A_1,\;A_2$와 다르고, Cepacidine $A_1,\;A_2$와는 항진균 스펙트럼에서 현저하게 차이가 났다. CLP2011A, CLP02A가 분자량, 아미노산 조성, UV spectrum, IR spectrum에서 Cepacidine A와 동일하지만 항진균 스펙트럼이 상이한 것은 이들이 다른 물질임을 시사하며, 이는 aliphatic side chain이 Cepacidine A의 그것과 다른 데에서 비롯된 분자구조의 상이함에서 기인된 것으로 추론된다.

  • PDF

안경렌즈의 자외선 차단 평가 (Evaluation of Ultraviolet Blocking of Ophthalmic Lenses)

  • 유동식;유종숙
    • 한국안광학회지
    • /
    • 제13권3호
    • /
    • pp.7-12
    • /
    • 2008
  • 목적: 투명과 착색 안경렌즈의 자외선 차단 특성을 평가하고자 하였다. 방법: 안경렌즈의 투과 스펙트럼은 ANSI Z80.1에 제시된 방법으로 측정하였고, UV(200~380 nm; UVA, UVB, UVC) 및 청색광 영역(380~400 nm)에 대하여 각 렌즈의 투과율을 계산하였다. 결과: 중굴절률, 고굴절률의 투명 플라스틱 렌즈 및 착색 플라스틱 렌즈는 UV에서 우수한 자외선 차단 특성을 보였으나, 자외선 차단제를 처리하지 않은 크라운 유리나 CR39는 그렇지 않았다. 고굴절률 렌즈와 눈부심 방지 야간용 렌즈를 제외한 모든 렌즈는 청색광을 효과적으로 차단하지 않았다. 결론: 크라운 유리와 CR39 렌즈는 UV로부터 눈을 보호하기 위해서 자외선 차단제가 필요하다. 또한 고굴절률 렌즈와 눈부심 방지 야간용 렌즈를 제외한 모든 렌즈는 청색광으로부터 눈을 보호하기 위해서 청색광 차단제가 필요하다.

  • PDF

연면방전에 의한 폴리머애자의 자외선 발생과 열화특성 (The Characteristics of UV Generation and Aging Materials in According to Surface Discharge)

  • 송길목;방선배;김종민;김영석;정진수
    • 전기학회논문지
    • /
    • 제57권9호
    • /
    • pp.1606-1611
    • /
    • 2008
  • Recently, The diagnosis techniques of electric facilities are developed on live line. This paper describes the discharge characteristics of polymer insulator(EPDM A type). Keeping the facilities in good working order, the goal of this paper will provide the information to enable user to easily judge conditions of facilities on the spot. The performance of polymer insulator is assessed from the KS C IEC 60270 and CEA LWIWG-01(96)(Tracking Wheel Test). As the results, UV generation patterns of polymer insulator grow like a jellyfish shape follow the ramping voltage. Discharging UVs are detected at about 31.25% of breakdown voltage. Just then, dimension of UV image is about $0.84cm^{2}$. The dimension of max. UV image is about $297.4cm^{2}$ at $160kV(V_{bd})$. The position of UV generation due to surface discharge of polymer insulator is the center of insulator in the early, then moved the ground side and the last, UV image moved through the junction part of source side. Surface of aged polymer insulator is cracked and faded due to arc. UV absorption spectrum of polymer insulator are appeared the C-H bond of scissoring vib. at $1014cm^{-1}$ and C=O bond of recombination structure. Also, recombined UV absorption peak such as C-H, N-H, and O-H is detected at the $3321cm^{-1}$. Through the paper, there are inspection data which are the relations between surface discharge of polymer insulator and UV detecting image.

전도성 고분자를 Buffer층으로 사용한 유기 발광 소자의 제작과 특성 연구 (Characteristics of organic electroluminescent devices using conducting polymer materials with buffer layers)

  • 이호식;박종욱;김태완;강도열
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 추계학술대회 논문집
    • /
    • pp.125-128
    • /
    • 1998
  • Electroluminescent(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. One of the problems of such device is a lifetime, where a degradation of the cell is possibly due to an organic layer's thickness, morphology and interface with electrode. In this study, light-emitting organic electroluminescent devices were fabricated using Alq$_3$(8-hydroxyquinolinate aluminum) and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl)-[1-1'-biphenyl]-4,4'-diamine).Where Alq$_3$ is an electron-transport and emissive layer, TPD is a hole-transport layer. The cell structure is ITO/TPD/Alq$_3$/Al and the cell is fabricated by vacuum evaporation method. In a measurement of current-voltage characteristics, we obtained a turn-on voltage at about 9 V. And we used other buffer layer of PPy(Polypyrrole) with ITO/PPy/TPD/Alq$_3$/Al structure. We observed a surface morphology by AFM(Atomic Force Microscopy), UV/visible absorption spectrum, and PL(Photoluminescence) spectrum. We obtained the UV/visible absorption peak at 358nm in TPD and at 359nm in Alq$_3$, and at 225nm and the PL peaks at 410nm in TPD and at 510nm in Alq$_3$ and at 350nm. We also studied EL spectrum in the cell structure of ITO/TPD/Alq$_3$/Al and ITO/PPy/TPD/Alq$_3$/Al and we observed the EL spectrum peak at 510nm from our cell

  • PDF

Comparison of optical reflectance spectrum at blade and vein parts of cabbage and kale leaves

  • Ngo, Viet-Duc;Ryu, Dong-Ki;Chung, Sun-Ok;Park, Sang-Un;Kim, Sun-Ju;Park, Jong-Tae
    • 농업과학연구
    • /
    • 제40권2호
    • /
    • pp.163-167
    • /
    • 2013
  • Objective of the study was to compare reflectance spectrum in the blade and the vein parts of cabbage and kale leaves. A total 6 cabbage and kale leaves were taken from a plant factory in Chungnam National University, Korea. Spectra data were collected with a UV/VIS/NIR spectrometer (model: USB2000, Ocean Optics, FL, USA) in the wavelength region of 190 - 1130 nm. Median filter smoothing method was selected to preprocess the obtained spectra data. We computed reflectance difference by subtraction of averaged spectrum from individual spectrum. To estimate correlation at different parts of cabbage and kale leaves, cross - correlation method was used. Differences between cabbage and kale leaves are clearly manifested in the green, red and near - infrared ranges. The percent reflectance of cabbage leaves in the NIR wavelength band was higher than that of kale leaves. Reflectance in the blade part was higher than in the vein part by 18%. Reflectance difference in the different parts of cabbage and kale leaves were clear in all of the wavelength bands. Standard deviation of reflectance difference in the vein part was greater for kale, while the value in the blade part was greater for cabbage leaves. Standard deviation of cross - correlation increased from 0.092 in the first sensor (UV/VIS) and 0.007 in the second sensor (NIR) to 0.099 and 0.015, respectively.

L-Ascorbic acid 갈변반응물질 중 항산화성물질의 분리 (Isolation of Antioxidative Substances from Browning Reaction Product Obtained from L-Ascorbic Acid Solution)

  • 유병진
    • 한국식품과학회지
    • /
    • 제25권3호
    • /
    • pp.214-219
    • /
    • 1993
  • pH7.0으로 조절한 2M의 AsA 용액을 $85^{\circ}C$에서 25시간 갈변반응시켜서 생성된 물질 중 항산화효과를 지닌 물질을 분리하고 성질을 조사하였다. 투석내액 및 투석외액 갈변반응물질 모두 항산화성이 존재하였고 투석외액 갈변반응물질의 항산화효과가 더 크게 나타났다. 투석외액 갈변반응물질을 gel 여과하여 분리된 3가지 획분(A, B, C)중 갈변도가 가장 높고 환원력이 가장 낮은 획분(C)의 항산화효과가 가장 크게 나타났다. 항산화성이 중간정도인 획분(B)은 환원력의 세기와 갈변도가 세획분중 중간정도에 속하였고 환원력은 가장 높고 갈변도가 가장 낮은 획분(A)은 항산화효과가 가장 낮았다. UV-Visible spectrum에서 A획분과 B획분은 각각 266.1 및 257.4nm에서 최대흡광 peak를 나타냈으나 C획분은 274.8nm에서 약한 peak를 나타내었다. IR-spectrum 조사결과 A, B 및 C획분 모두 hydroxy 및 carboxylic group이 존재하였고 항산화성이 큰 B와 C분획은 carboxylic ester이었다.

  • PDF

오존, UV, 오존/UV 혼합 공정을 이용한 Diethyl Phthalate(DEP)의 제거특성 연구 (Characterization of Diethyl Phthalate(DEP) Removal using Ozone, UV, and Ozone/UV Combined Processes)

  • 정연정;오병수;강준원
    • 대한환경공학회지
    • /
    • 제28권2호
    • /
    • pp.137-143
    • /
    • 2006
  • 본 연구는 오존 단독, UV 단독 및 오존/UV 혼합 공정을 이용하여 DEP의 제거 특성을 알아보고자 수행되었다. 실험 결과로서, 오존/UV 공정에서 가장 높은 제거 효율을 나타냈다. 오존 및 오존/UV 공정에서 DEP의 분해 경로를 파악하기 위해서 pH 변화 및 OH 라디칼($OH^{\circ}$) scavenger 첨가 유무에 따른 제거 정도를 비교하였다. 그 결과, DEP 분해 시 $OH^{\circ}$과의 반응이 주된 반응이며, 오존에 의한 직접 산화 반응 및 UV에 의한 광분해 반응은 무시할 정도로 작았다. 오존 및 오존/UV 공정에서 DEP의 의사일차속도상수를 비교하였을 때, 오존/UV 공정은 일차속도에 잘 일치한 반면 오존 단독 공정에서는 일차속도로 제거되는 경향이 초기에 빠르고 일정한 반응시간 이후에 느려지는 두 영역으로 나뉘어 나타났다. 오존 및 오존/UV 긍정에 의해 생성되는 DEP 산화 부산물을 간접적으로 확인하기 위해 HPLC 스펙트럼을 조사한 결과 미지의 물질이 검출되었으며, 반응시간에 따라 이 물질이 생성되다가 감소하는 일정한 경향을 보였다. 또한, 오존/UV 혼합공정에서 높은 TOC 제거율을 나타내 DEP 및 DEP 산화부산물까지 완전 산화됨을 확인하였다.