• Korean Journal of Materials Research
• /
• v.23 no.3
• /
• pp.194-198
• /
• 2013

In this paper, we studied a p-type reflector based on indium tin oxide (ITO) for vertical-type ultraviolet light-emitting diodes (UV LEDs). We investigated the reflectance properties with different deposition methods. An ITO layer with a thickness of 50 nm was deposited by two different methods, sputtering and e-beam evaporation. From the measurement of the optical reflection, we obtained 70% reflectance at a wavelength of 382 nm by means of sputtering, while only 30% reflectance resulted when using the e-beam evaporation method. Also, the light output power of a $1mm{\times}1mm$ vertical chip created with the sputtering method recorded a twofold increase over a chip created with e-beam evaporation method. From the measurement of the root mean square (RMS), we obtained a RMS value 1.3 nm for the ITO layer using the sputtering method, while this value was 5.6 nm for the ITO layer when using the e-beam evaporation method. These decreases in the reflectance and light output power when using the e-beam evaporation method are thought to stem from the rough surface morphology of the ITO layer, which leads to diffused reflection and the absorption of light. However, the turn-on voltage and operation voltage of the two samples showed identical results of 2.42 V and 3.5 V, respectively. Given these results, we conclude that the two ITO layers created by different deposition methods showed no differences in the electric properties of the ohmic contact and series resistance.

• Journal of Ginseng Research
• /
• v.30 no.2
• /
• pp.82-87
• /
• 2006

Quantitative difference in five phenolic acids between white and red ginsengs was measured in this study. As the results, white ginseng has higher contents of cinnamic acid, quercetin and p-coumaric acid than red ginseng. Maltol was mainly included in red ginseng. These five compounds were recently reported to have tyrosinase inhibitory effects. These reports led us to investigate the de-pigmenting effect of ginseng products. In our examination of effect on tyrosinase activity, UV-protection and melanin production in melan-a cells, ethyl acetate traction of white ginseng extract and cinnamic acid showed potent de-pigmenting properties. The results indicated that white ginseng might be useful as skin whitening material and cinnamic acid proved to be one of active ingredient.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.11
• /
• pp.1382-1389
• /
• 2022

Asterias pectinifera, a species of starfish and cause of concern in the aquaculture industry, was recently identified as a source of non-toxic and highly water-soluble collagen peptides. In this study, we investigated the antioxidant and anti-photoaging functions of compounds formulated using collagen peptides from extracts of Asterias pectinifera and Halocynthia roretzi (AH). Our results showed that AH compounds have various skin protective functions, including antioxidant effects, determined by measuring the scavenging activity of 2,2-diphenyl-1-picrylhydrazyl radicals, as well as anti-melanogenic effects, determined by measuring tyrosinase inhibition activity. To determine whether ethosome-encapsulated AH compounds (E(AH)) exert ultraviolet (UV)-protective effects, human dermal fibroblasts or keratinocytes were incubated with E(AH) before and after exposure to UVA or UVB. E(AH) treatment led to inhibition of photoaging-induced secretion of matrix metalloproteinase-1 and interleukin-6 and -8, which are associated with inflammatory responses during UV irradiation. Finally, the antibacterial effects of AH and E(AH) were confirmed against both gram-negative and gram-positive bacteria. Our results indicate that E(AH) has the potential for use in the development of cosmetics with a range of skin protective functions.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.495-506
• /
• 2018

Global interest in climate change and sea level rise has led to active research on the velocities of glaciers. In studies about the velocity of glaciers, in-situ measurements can obtain the most accurate data but have limitations to acquire periodical or long-term data. Offset tracking using SAR is actively being used as an alternative of in-situ measurements. Offset tracking has a limitation in that the accuracy of observation is lower than that of other observational techniques, but it has been improved by recent studies. Recent studies in the $Uv{\hat{e}}rsbreen$ glacier area have shown that glacier altitudes decrease at a rate of 1.5 m/year. The glacier displacement velocities in this region are heavily influenced by climate change and can be important in monitoring and forecasting long-term climate change. However, there are few concrete examples of research in this area. In this study, we applied the improved offset tracking method to observe the two-dimensional velocity in the $Uv{\hat{e}}rsbreen$ glacier. As a result, it was confirmed that the glacier moved at a maximum rate of 133.7 m/year. The measruement precisions for azimuth and line-of-sight directions were 5.4 and 3.3 m/year respectively. These results will be utilized to study long-term changes in elevation of glaciers and to study environmental impacts due to climate change.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.277-277
• /
• 2017

The research was carried out to investigate a total polyphenol content, antioxidant activity, amino acid and resveratrol content of peanut sprouts (cotyledon, epicotyl, leaf, hypocotyl, root), in different light (white, blue, red, F-red, UV-A, UV-B, UV-C) conditions for 24 hours. Peanut seeds were sown on a $27.5{\times}15.9{\times}13cm$ tray and grown at the $25^{\circ}C$ under the dark condition for 14 days. Total polyphenolic contents of epicotyl and leaf were about 288mg GAE/100g in blue light. The DPPH radical scavenging of cotyledon and hypocotyl were 1.3~1.5 times (63%) and 2 times (40%) compared to control (43%, 19%), respectively. As to ABTS activity, its activity was increased by all LEDs treatment, Especially, the highest ABTS activity of the hypocotyl and leaf was shown as 99.1% in blue light. The essential amino acid content of hypocotyl and leaf was increased 1.9 times in the UV-B, 1.6 times in red, and 1.5 times in F-red, respectively. The non-essential amino acid content was increased by all LEDs treatment in hypocotyl and leaf. The content of resveratrol was increased by 1.3 times in UV-B compared to that of other tissues. Assessing inclusively, this study showed that there was a significantly positive effect between increase of physiological substance activity and LED light treatment, resulting in stably producing peanut sprouts. Therefore, a material treated with LEDs is thought to be useful as a functional food resources.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.237-240
• /
• 2016

The improvement of irradiation intensity and irradiation uniformity is essential for large area and high power UVA light source application. In this study, large number of chips bonded by micro soldering technique were driven by low current, and current limiting diodes were configured to supply constant current to parallel circuits consisting of large number of series strings. The dimension of light source module circuit board was $350{\times}90mm^2$ and 16,650 numbers of 385 nm flip chip LEDs were used with a configuration of 90 parallel and 185 series strings. The space between LEDs in parallel and series strings were maintained at 1.9 mm and 1.0 mm distance, respectively. The size of the flip chip was $750{\times}750{\mu}m^2$ were used with contact pads of $260{\times}669{\mu}m^2$ size, and SAC (96.5 Sn/3.0 Ag/0.5 Cu) solder was used for flip chip bonding. The fabricated light source module with 7.5 m A supply current showed temperature rise of $66^{\circ}C$, whereas irradiation was measured to be $300mW/cm^2$. Inaddition, 0.23% variation of the constant current in each series string was demonstrated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.104-104
• /
• 2011

ZnO는 3.37 eV의 넓은 에너지 밴드갭을 갖는 투명 전도성 반도체이며 우수한 전기적, 광학적 특성으로 인해 광원소자 개발을 위한 새로운 물질로 많은 주목을 받아왔다. 더욱이, ZnO는 쉽게 나노구조 형성이 가능하기 때문에 이를 응용한 가스센서, 염료감응태양전지, 광검출기 등의 소자 개발이 활발히 이루어지고 있다. 최근에는 GaN 기반 발광다이오드 (light emitting diode, LED)의 광추출 효율을 향상시키기 위한 ZnO 나노구조 응용에 관한 연구가 보고되고 있다. GaN 기반 LED의 경우 반도체 물질과 공기 사이의 높은 굴절률 차이로 인하여 낮은 광추출 효율을 나타낸다. 이를 해결하기 위한 방법으로 표면 roughening, texturing 등 에칭공정을 이용해 광추출 효율을 개선하려는 연구들이 보고되고 있으나, 복잡한 공정과정을 필요로 하고 에칭공정에 의한 소자 표면 손상으로 전기적 특성이 나빠질 수 있다. 반면 전기화학증착법으로 성장된 ZnO 나노구조를 이용할 때, 보다 간단한 방법으로 쉽고 빠르게 나노구조를 형성할 수 있고 낮은 공정온도를 가지기 때문에 소자의 전기적 특성에 큰 영향을 주지 않는다. 수직방향으로 잘 정렬된 ZnO 나노구조를 갖는 LED의 경우 내부 Fresnel 반사 손실을 효과적으로 줄여 발광 효율을 크게 향상시킬 수 있다. 따라서, ZnO 나노구조의 성장제어 및 성장특성을 분석하는 것은 매우 중요하다. 본 연구에서는 ITO glass 위에 ZnO 나노구조를 성장하고 그 특성을 분석하였다. ITO glass 기판 위에 RF magnetron 스퍼터를 사용하여 Al 도핑된 ZnO (AZO)를 얇게 증착한 후 전기화학증착법으로 ZnO 나노구조를 성장하였다. 농도, 인가전압, 공정시간 등 다양한 공정조건을 변화시키면서 성장 메커니즘을 분석하였고, scanning electron microscope (SEM) 및 X-ray diffraction (XRD)을 통하여 구조 및 결정성 등을 분석하였다. 또한, UV-Visible-NIR spectrophotometer를 사용하여 투과율을 실험적으로 측정하여 ZnO 나노구조의 광학적 특성을 분석하였고, rigorous coupled wave analysis (RCWA) 방법을 사용하여 계면에서 발생하는 내부 반사율을 계산함으로써 나노구조의 효과를 이론적으로 분석하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.29.1-29.1
• /
• 2009

Fabrication of good quality P-type GaN remained as a challenge for many years which hindered the III-V nitrides from yielding visible light emitting devices. Firstly Amano et al succeeded in obtaining P-type GaN films using Mg doping and post Low Energy Electron Beam Irradiation (LEEBI) treatment. However only few region of the P-GaN was activated by LEEBI treatment. Later Nakamura et al succeeded in producing good quality P-GaN by thermal annealing method in which the as deposited P-GaN samples were annealed in N2 ambient at temperatures above $600^{\circ}C$. The carrier concentration of N type and P-type GaN differs by one order which have a major effect in AlGaN based deep UV-LED fabrication. So increasing the P-type GaN concentration becomes necessary. In this study we have proposed a novel method of activating P-type GaN by electrochemical potentiostatic method. Hydrogen bond in the Mg-H complexes of the P-type GaN is removed by electrochemical reaction using KOH solution as an electrolyte solution. Full structure LED sample grown by MOCVD serves as anode and platinum electrode serves as cathode. Experiments are performed by varying KOH concentration, process time and applied voltage. Secondary Ion Mass Spectroscopy (SIMS) analysis is performed to determine the hydrogen concentration in the P-GaN sample activated by annealing and electrochemical method. Results suggest that the hydrogen concentration is lesser in P-GaN sample activated by electrochemical method than conventional annealing method. The output power of the LED is also enhanced for full structure samples with electrochemical activated P-GaN. Thus we propose an efficient method for P-GaN activation by electrochemical reaction. 30% improvement in light output is obtained by electrochemical activation method.

• Environmental Engineering Research
• /
• v.18 no.1
• /
• pp.21-28
• /
• 2013

In this study, the applicability of visible light-emitting-diodes (LEDs) to the photocatalytic degradation of indoor-level trichloroethylene (TCE) and perchloroethylene (PCE) over N-doped $TiO_2$ (N-$TiO_2$) was examined under a range of operational conditions. The N-$TiO_2$ photocatalyst was calcined at $650^{\circ}C$ (labeled N-650) showed the lowest degradation efficiencies for TCE and PCE, while the N-$TiO_2$ photocatalysts calcined at $350^{\circ}C$, $450^{\circ}C$, and $550^{\circ}C$ (labeled as N-350, N-450, and N-550, respectively) exhibited similar or slightly different degradation efficiencies to those of TCE and PCE. These results were supported by the X-ray diffraction patterns of N-350, N-450, N-550, and N-650. The respective average degradation efficiencies for TCE and PCE were 96% and 77% for the 8-W lamp/N-$TiO_2$ system, 32% and 20% for the violet LED/N-$TiO_2$ system, and ~0% and 4% for the blue LED/N-$TiO_2$ system. However, the normalized photocatalytic degradation efficiencies for TCE and PCE for the violet LED-irradiated N-$TiO_2$ system were higher than those from the 8-W fluorescent daylight lamp-irradiated N-$TiO_2$ system. Although the difference was not substantial, the degradation efficiencies exhibited a decreasing trend with increasing input concentrations. The degradation efficiencies for TCE and PCE decreased with increasing air flow rates. In general, the degradation efficiencies for both target compounds decreased as relative humidity increased. Consequently, it was indicated that violet LEDs can be utilized as energy-efficient light sources for the photocatalytic degradation of TCE and PCE, if operational conditions of N-$TiO_2$ photocatalytic system are optimized.