• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.12
• /
• pp.37-43
• /
• 2012

UV-IR diagnostic technology is being used for predictive maintenance of high voltage equipment together with IR-thermography and ultrasonic devices. In this paper, the UV-IR camera design, fabrication, and perform a simple test to be take advantage of the diagnostic equipment. UV-IR camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. In a distance of 5m with the UV-IR it is possible to detect partial discharge with a PD level of 2.5 pC and a RIV(Radio Influence Voltage) level of $3.6dB{\mu}V$.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.601-610
• /
• 1998

This study was carried out to investigate the possibility of supplemental UV-B application to the hardening phase of container-grown Betula platyphylla seedlings. The containerized seedlings were grown in a growth chamber for four months and then treated with UV-B(UV-$B_{BE}$ $3.2KJ\;m^{-2}\;day^{-1}$ and $5.2KJ\;m^{-2}\;day^{-1}$) radiation and water stress regime(irrigation in one week interval) for four weeks. The differences in growth and physiological responses of the seedlings before and after the treatments were analyzed. UV-B radiation and water stress reduced height growth and leaf dry mass accumulation of the seedlings. The root collar diameter growth was reduced by UV-B radiation but increased by water stress. The reduction in leaf dry weight by UV-B radiation and water stress reduced T/R ratio of the seedling. The reduction in T/R ratio was the most apparent by water stress. Chlorophyll index observed by a chlorophyll meter was the lowest in the $5.2KJ\;m^{-2}\;day^{-1}$ of UV-B radiation, and those in the $3.2KJ\;m^{-2}\;day^{-1}$ and water stress were similar. UV-B radiation and water stress reduced both water content in the seedlings and leaf water potential, and increased leaf osmatic pressure. The water content of leaves and shoots was reduced more rapidly by UV-B radiation than by water stress treatment. In conclusion, growth responses and physiological changes in water relation by supplemental UV-B radiation which was applied to the hardening phase of container-grown Betula platyphylla seedlings were similar results to the water stress treatment.

• Elastomers and Composites
• /
• v.41 no.3
• /
• pp.182-193
• /
• 2006

The retardation effects of a new polymeric UV stabilizer, DGEBA-HALS, on the UV degradation of SBR and NR were investigated in this study. The UV degradation behaviors of three different rubber compounds, without any photostabilizer and with commercial Cyabsorb UV-3529 and DGEBA-HALS, were compared. Also, the physical characteristics such as Young's modulus, tensile strength, blow-off deformation and crosslink density were examined. The Young's modulus was increased by UV irradiation for all samples, and the tensile strength, after UV irradiation, of the compound with UV stabilizer was better than that of the compound without stabilizer. Especially, the tensile strength of UV irradiated NR was improved by adding DGEBA-HALS. The results of blow-off deformation were in accord with those of Young's modulus. The degree of transmission of SBR compounds obtained from UV-vis transmission spectra was improved about 4% by adding the UV stabilizer. Commercial Cyabsorb UJV-3529 and DGEBA-HALS showed similar trends of transmission. The SEM photographs of SBR surface showed that the size of cracks created by UV irradiation became smaller by adding UV stabilizer. In particular, it is observed that the stabilization effect of DGEBA-HALS was better than that of commercial Cyabsorb UV-3529.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.139-150
• /
• 2019

This study is investigated sunscreen formulation that enhances UV absorption efficiency by UV light. Ethylhexyl methoxycinnamate (OMC) is one of the most common UV filters. Many studies have been conducted about photostability of OMC. It is well known that under the UV exposure, trans-OMC could turn to cis-OMC, or produce various photoproducts including its dimers. Those chemical structure changes were understood as the reason of a decrease in UV absorption efficiency upon UV exposure. However, it was found that OMC and isoamyl p-methoxycinnamate (IMC) could even enhance its UV absorption efficiency when it was exposed to UV light in an environment similar to actual use. In order to develop sunscreen formulation that enhances UV absorption efficiency by UV light, emollient with high polarity and compatibility should be avoided from the formular. Those emollient seemed to prevent OMC or IMC from producing photoproducts under UV light. Finally, a sunscreen formulation (UV sensing SPF boosting formular) enhancing UV absorption efficiency by UV was developed by the UV activated SPF boosting technology, and the effect of the sunscreen was evaluated. in vitro SPF of the sunscreen was increased from 50.69 to 72.33 when it was exposed to UV light and its in vivo SPF (53.7) was 56.10% higher than that of the control sunscreen (below 34.4).

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.1
• /
• pp.75-81
• /
• 2015

Purpose: The present study was conducted to investigate whether the changes in structure and activity of antioxidative enzymes, superoxide dismutase(SOD) and catalase(CAT) present in the eyes appeared when they were repeatedly exposed to UV-A, and reveal the correlation of these changes. Methods: Each enzyme solution was prepared from the standardized SOD and CAT, and repeatedly exposed to UV-A of 365 min under the condition of 30 minutes, 1 hour and 2 hours a day over 1, 2, 3, 4 and 5 days. Structural denaturation of SOD and CAT induced by repeat UV-A irradiation was confirmed by the electrophoretic analysis, and their enzyme activity was determined by the colorimetric assay using the proper assay kit. Results: SOD exposed repeatedly to UV-A showed the polymerization pattern through the electrophoretic analysis when it was repeatedly exposed under the condition of at least 1 hour a day however, the change of its activity was found to be less than 12%. On the other hand, CAT repeatedly exposed to UV-A showed reduced size of the electrophoretic band which indicated a structure denaturation and its activity was significantly decreased. In the case of that the repeat exposure time was longer, CAT activity was completely lost even though some enzyme band was shown in the electrphoretic analysis. Conclusions: From these results, it was revealed that the degree and pattern in structural denaturation of antioxidative enzymes differently appeared according to the type of enzyme, and the degree of structural denaturation was not always consistent with the reduction in enzyme activity.

• Journal of Sensor Science and Technology
• /
• v.17 no.5
• /
• pp.346-349
• /
• 2008

A metal-semiconductor-metal (MSM) ultraviolet (UV) photodetector (PD) is proposed as an effective UV sensing device for integration with a GaN n-channel MISFET on auto-doped p-type GaN grown on a silicon substrate. Due to the high hole barrier of the metal-p-GaN contact, the dark current density of the fabricated MSM PD was less than $3\;nA/cm^2$ at a bias of up to 5 V. Meanwhile, the UV/visible rejection ratio was 400 and the cutoff wavelength of the spectral responsivity was 365 nm. However, the UV/visible ratio was limited by the sub-bandgap response, which was attributed to defectrelated deep traps in the p-GaN layer of the MSM PD. In conclusion, an MSM PD has a high process compatibility with the n-channel GaN Schottky barrier MISFET fabrication process and epitaxy on a silicon substrate.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.237-246
• /
• 2015

Purpose: The present study was conducted to reveal the correlation of structural denaturation and decrease of enzyme activity when the antioxidative enzymes, superoxide dismutase (SOD) and catalase (CAT) were repeatedly exposed to UV-B, and further investigate whether the denaturation and inactivation of those enzymes can be effectively blocked by using UV-inhibitory RGP lens. Methods: Each enzyme solution was prepared from the standardized SOD and CAT, and repeatedly exposed to UV-B of 312 nm for 30 minutes, 1 hour and 2 hours a day over 1, 2, 3, 4 and 5 days. Structural denaturation of SOD and CAT induced by repeat UV-B irradiation was confirmed by the electrophoretic analysis, and their enzyme activity was determined by the colorimetric assay using the proper assay kit. At that time, the change in structure and activity of the antioxidant enzymes directly exposed to UV-B was compared to the case that UV-B was blocked by UV-inhibitory RGP lens. Results: SOD exposed repeatedly to UV-B showed the polymerization pattern in the electrophoretic analysis when it repeatedly exposed for 30 min a day, however, the change of its activity was less than 10%. On the other hand, CAT repeatedly exposed to UV-B reduced size and density of the electrophoretic band which indicated a structure denaturation, and its activity was significantly decreased. In the case that the repeat exposure time was longer, CAT activity was completely lost even though some enzyme band occurred in the electrphoretic analysis. In addition, the degeneration of CAT due to UV-B irradiation was inhibited to some extent by using RGP lens with a UV-B blocking of 63.7%, however, it was not completely inhibited. Conclusions: From these results, it was revealed that the structural denaturation of antioxidative enzymes was not perfectly correlated with the reduction in enzyme activity according to the type of enzyme. It is recommended to minimize the exposure time to UV when wearing contact lens, or wear the contact lenses having UV blocking rate of the FDA Class I blocker or the sunglasses having equivalent UV-blocking rate for reducing the damage of antioxidative enzymes induced by UV.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.643-648
• /
• 2013

In this study, degradation was observed by irradiating UV rays to the polymer insulators which have been widely used in outdoor electric power facilities. For an indoor accelerated UV test, 0.55 w/m2 of UV rays were applied using a xenon-arc method. A UV detection system with 65 ${\phi}mm$ in diameter, 100 mm in length and 1.0 of brightness (F/#) has been designed. Even though efflorescence on the surface of polymer insulators wasn't observed according to the accelerated UV test. UV rays were detected at around 50% and 40% of insulation breakdown in EPDM and silicone-type insulators respectively. As degradation continued because of an indoor accelerated UV test, breakdown voltage with which UV rays can be detected in an early stage decreased as well. A silicone polymer insulator would be severer than EPDM polymer insulator in terms of surface degradation because of UV strength against $V_m/V_{BD}$ was high in silicone polymer insulators. UV strength in silicone-type insulators increased at 1,000 $kJ/m^2$ because contact angle at the intial stage sharply decreased to from $113^{\circ}$ to $92.1^{\circ}$.

• Journal of Convergence for Information Technology
• /
• v.7 no.1
• /
• pp.43-48
• /
• 2017

The design trend is changed with the times. The design trend of recent 21 century is eco-friendly design. The optical illusion design is a new trend of digital convergence era. In this study, optical illusion patterns were designed for furniture with eco-friendly UV-curable resin. The micro-patterns of optical illusion design were fabricated with the micro-mold which was mastered using a semiconductor micro-fabrication process by photolithography technique. The micro-patterns of optical illusion design were manufactured on PET film with a roll-to-roll process using a UV-curable resin. The manufactured PET film of optical illusion micro-pattern exhibits hologram effect, optical illusion effect, and texture of metal with the backside digital printing of metal tone. The furniture of new design concept so-called emotional furniture was manufactured with the various optical illusion design patterns. The optical illusion design patterns by UV mold prospect a new trend of interior design materials.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.28-32
• /
• 1998

Two organophosphorous insecticides, Dichlorovos and Chloropyrifos were degraded in the presence of UV irradiation, UV irradiation with $TiO_2$ powder and UV irradiation with sea sand using low pressure mercury lamp. The identification of these compounds was carried out by gas chromatograph with a nitrogen-phosphorous detector, Total Organic Carbon and Ion Chromatograph, respectively. Both dichlorvos and chloropyrifos, UV irradiation with sea sand were more degradable than UV irradiation and UV irradiation with $TiO_2$ powder. The final products were $Cl^-$ in Dichlorvos, $Cl^-$ $SO_4{^{2-}}$ in Chloropyrifos, respectively.